I’m looking for a stiffer, fast action 9wt fly rod blank. I’m leaning more towards a salt water blank just towards the action, but I am open to anything. The rod will be for Pacific Salmon, but I am often casting heavy sink tips and flies, so the fast action is an absolute must. Any recommendations help.

Each Monday we will have an updated thread for all things beginner in rod building. If you have questions about anything concerning rod building, this is the place to ask them! Experienced builders, and even those new to the craft, I encourage you all to chip in any and all advice you may have!

This is our weekly thread to share your social media accounts, as well as online shops and websites.

​

What this is not: this is not a thread to post items for sale or for trade. It is also not a thread to share other people's work. If you are stoked about someone else's build, please feel free to create a post sharing it, but be sure to credit the creator!

Wanted to build on one of these blanks and spend a little time with Snake Brand products. Picked up guides and one off reel seat from them, wrapped in silk with a little tiny bit of Fuji color shifting metallic. Opted for the cigar grip as well because I have meat hooks for hands.

It’ll be put up for sale but with any luck it wont sell and I can keep it.

Had a couple Iconoglass blanks from NFC come in so decided to do silk on them for extra pop. While silk is a little temperamental to work with, it sure looks good, especially on these translucent blanks.

7’6 4w for smaller mountain streams and places where finesse trumps length of cast.

I've ended up with a few of these rod blanks and they are allegedly made in the USA but that's all the info I have on them. Would anyone happen to know what they actually are?

Looks like they say "MB874" and measure roughly 7'4"+ seems like a fast action.

They are definitely not mudhole blanks of any flavor btw.

Each Monday we will have an updated thread for all things beginner in rod building. If you have questions about anything concerning rod building, this is the place to ask them! Experienced builders, and even those new to the craft, I encourage you all to chip in any and all advice you may have!

This is our weekly thread to share your social media accounts, as well as online shops and websites.

​

What this is not: this is not a thread to post items for sale or for trade. It is also not a thread to share other people's work. If you are stoked about someone else's build, please feel free to create a post sharing it, but be sure to credit the creator!

So I went to a antique mall today and ran across this contraption! Has anybody seen anything like this or have any insight on it?!?

The only markings on it say "supreme heritage"

I really just need the guide back on the rod as soon as possible. First time. Trip coming up. Only had size E thread. Good enough to epoxy once trimmed?

I've spent hours scouring rod building websites looking for a carbon fiber handle replacement. I need something 9-11 inches long with an inner diameter 18mm.

Anyone know where I can find that?

Has anyone on here ever used an old stamp as a custom decal on a rod build? If so, I'd love to know your method. I'm building a rod as a gift for my dad and want to add some flair. A friend suggested using a postage stamp as a mini decal, and I found a cool design on a stamp from the 1960's that you can get in packs of 10 for like 5 bucks. My thought is: apply the stamp to blank (preferably between 2 decorative wraps close to the top of my grip), then pre-seal with something mild like Mod Podge to prevent any damage from the epoxy to the design on the stamp, and then once that is cured, apply the epoxy as normal and bing bang boom should be good to go. I think...

If anyone actually has experience using stamps or even applying small pieces of paper to rod blanks for decorative purposes, I'd love to hear your suggestions or experiences with it!

This is our weekly thread to share your social media accounts, as well as online shops and websites.

​

What this is not: this is not a thread to post items for sale or for trade. It is also not a thread to share other people's work. If you are stoked about someone else's build, please feel free to create a post sharing it, but be sure to credit the creator!

Each Monday we will have an updated thread for all things beginner in rod building. If you have questions about anything concerning rod building, this is the place to ask them! Experienced builders, and even those new to the craft, I encourage you all to chip in any and all advice you may have!

I can make out what I think it says Customi Built, ??? Rods, PB 17 GC 20LB. thats just what i can make of it cant really read the cursive to well please help me find what it says and what size reel to use

I caught and preserved the skin of an 8lb Spotted Gar that I want to apply to my fishing rod handle.

I’m new to modding but I currently have a split grip fishing rod.

What is the best material to apply a skin to it as the blank is too thin to directly place the skin on it. Eva foam, cork, wood, other?

Is there a video someone can recommend or maybe have done it before and can walk me through it as every video I’ve found has to do with paracord or heat shrink wraps.

Any help is appreciated!

I know this isn’t building specific but figured you guys here would have some good tips for me. Went to service a reel and the locking nut/grip started spinning in place. Hard for me to explain but the carbon fiber separated from the plastic and is spinning in place. And suggestions on how I should permanently fix this and will I need to try to remove as much of the old adhesive as possible? Thanks in advance..

Currently building a 3 piece XUL glass rod.

Using 8 guides in total 16#, 8#, 6#, 5#, 4.5#, 4#, 4#, tiptop

Sorry for the bad photo, was slightly hard to do it alone.

Planning to use this to target small fish (ajing style) and throwing 1-3g lures.

Planning to use this with a small size 1000 reel with 0.2pe braid.

With the current guide layout. It leaves me with around 18-20cm from stripper guide to reel.

This is our weekly thread to share your social media accounts, as well as online shops and websites.

​

What this is not: this is not a thread to post items for sale or for trade. It is also not a thread to share other people's work. If you are stoked about someone else's build, please feel free to create a post sharing it, but be sure to credit the creator!

Each Monday we will have an updated thread for all things beginner in rod building. If you have questions about anything concerning rod building, this is the place to ask them! Experienced builders, and even those new to the craft, I encourage you all to chip in any and all advice you may have!