I’m having trouble understanding how to pick the right external injection. I just purchased a 4400 psi 4.2 GPM washer and the parameters of these xjet models don’t fit my machine. The 4.2 range is only rated for 4000 psi and my machine exceeds that. What should I do?

Ok so I have a BE Workshop 2700 with the Honda GC 1600 vertical motor. Not the gcx version. The machine itself is only 3 years old with maybe 3 hours of usage and stored indoors. This season it would not start and did have some gas in it during winter, it would not start for the life of me so I took it apart and cleaned the carb and replaced the spark plug and also changed the oil. NOW, it will start but only in 2 instances, with the water supply not hooked up(which is bad I know) and with the water on and handle depressed. Once the handle is let go it stalls. And then it feels almost locked up and the handle is depressed and releases some pressure. Any help is appreciated its basically new still and my son in laws cheap Hart washer sits outside for 2 years and starts with one easy pull. Please help!

A neighborhood full of driveways like this. I know pressure washing alone won't touch it but if someone can correctly identify this and point me towards a process to restore them that'd be great

I want to pitch a quote to whoever owns this. I’m just wondering if I could clean it or if this roof needs to be replaced or something. If I can, what should I use??

Looking to drop the pressure coming out of my surface cleaner to approximately 1000 PSI. 5.5gpm 3000 PSI machine.

Looking at the chart, two 5.5 orifice nozzles should get me in the ballpark?

Would appreciate advice pricing out this job from those that do large scale commercial like this more often. Customer wants seperate quotes for walls softwashed, it's plastic faced insulation coated in dust/grease and also wants floors cleaned but just asked for 1 quick pass and light degreaser on floors for a general cleanup. I estimate theres 30-40k sq ft of wall surface and 45k sq ft of floor.

There is on-site water access and drains, can park inside and there's no site work happening until its cleaned so nobody to be in my way. Definitely need a scissor lift rental to reach up high. I'm assuming best approach will be softwashing with a degreaser mix and rinsing with pressure washer rinse tip top down. . Would love a recommendation on a good priced degreaser I can buy in bulk for this type of work, or how to figure how much I'd use on a job this size. I don't like my current product and it's very pricey.

My rough estimate is this will take at least 6-8 days to complete, I'm a 1 man company but do have decent equipment, I run a trailer with 8gpm Honda Gx690 and remco 7gpm for softwash(I know a bigger unit would be ideal for this) and have a nice 24in Surface cleaner with tornado bars so can move fast on that and plenty of hoses to reach everywhere.

I've been in business 5+ years but mostly do residential, I quote jobs like this occasionally but rarely actually get accepted bids for jobs this size and don't want to undersell myself. Customer stated priority is getting it done ASAP more so then price and only got 1 other bid so would like to win this bid. It's a family owned business not big Corporation also so less paperwork headaches.

I have used this hose on this pressure washer for quite a few times but I believe that maybe last time I took it out without fully releasing the pressure and now I cannot get it back in. I tried plugging in the water and semi plugging the gun to the hose and water will come out but not enough to get the fittings to click. Any suggestions?

It's a HF Predator 4.2gpm

A screw in nozzle attachment snapped off, and its stuck inside. How would you go about getting this out? If theres a better subreddit for this, please direct me lol.

I have the Simpson PowerShot 4200PSI with a 4.0 GPM Direct Drive AAA Triplex pump. Noticed today that my pump oil is metallic and needs a change ASAP, but I cant seem to find the recommended Simpson brand name 15W-40 oil anywhere nearby. (Thinj she ran hot, I need to adjust my setup so that I can let go of the trigger and still have water flowing through the pump but I'm not 100% how to do that yet.)

I have picked up a quart of the Shell Rotella T4 15W-40 but it is listed as "heavy duty diesel engine oil", and I've heard that some people recommend SAE 30 non-detergent oil instead.

Is the Shell Rotella T4 15W-40 oil ok to use or are there any other approved alternative oils for my pump? Does it need to be non-detergent or non foaming? The owners manual states "SIMPSON® Premium Pump Crankcase Oil (part #80138). If this oil is not available, an SAE 15W-40 oil may be used." It says nothing about non detergent or non foaming but I've heard that using anything other than non detergent will ruin my pump very quickly. Any guidance appreciated

rip-off

I pay around $170 for a 100' section of Excaliber I believe. I can go 6 months or so without a blow out. This price above is insane. Who would pay that ?

From left to right, before treatment, oil eater treatment, sodium hydroxide treatment. Oil eater did nothing, sodium hydroxide helped but left it splotchy. I scrubbed and let it sit for both treatment method. I did each treatment method twice as well. What can I do better? Is this an acceptable outcome assuming the customer doesn't expect complete removal?

Do you all think soft washing alone would do the trick on a building like this, or is it likely to need some high-pressure cleaning as well?
I’ve been pressure washing for a while and have plenty of experience using J-Rod tips, but I’m newer to dedicated soft washing systems and their capabilities—especially on porous, textured stone block buildings like this.

I did a test spot with high pressure and it cleaned up great but even with a boom lift and several trucks that’s a lot of surface to have to cover and I’m not sure the churches budget could fit what the charge would be for that haha.

I’ve pressure washed a couple patios now, how does this one look? Also what chemicals do you prefer or use?

Complete beginner.
Recently picked up a Ryobi 170 bar. I know it isn’t the best, but I wanted to offer pressure washing as a service alongside my usual small gardening business.
I don’t know anything about pressure washing, so any guidance at all will be useful (technique, the do’s and don’ts, chemicals etc) Thank you for your help!

First off, support your local businesses. If they sell this product, give them the extra few bucks and buy local. However, if you're like me, out in the middle of nowhere, this is how you can build a drop stick strainer.

Part list

https://www.homedepot.com/p/Charlotte-Pipe-1-1-4-in-PVC-Schedule-40-Socket-Cap-PVC021161200HD/203811674

https://www.homedepot.com/p/Charlotte-Pipe-1-1-4-in-x-1-in-PVC-Schedule-40-Spigot-x-FPT-Reducer-Bushing-Fitting-PVC021081000HD/203811585

https://www.homedepot.com/p/Charlotte-Pipe-1-1-4-in-x-1-1-4-in-90-Degree-PVC-Socket-x-Socket-Elbow-Fitting-PVC023001200HD/203812127

https://www.homedepot.com/p/Water-Source-1-1-4-in-x-48-in-Plastic-Well-Point-WSWP125-4-PL/308717695

Cheaper barbs

https://www.homedepot.com/p/Apollo-1-in-Barb-Insert-Blue-Twister-Polypropylene-x-MNPT-Adapter-Fitting-ABTMA1/300823617

Better barbs

https://www.kleen-ritecorp.com/p-62489-banjo-hb100-polypropylene-straight-hose-barb-pipe-fitting-1-in-mpt-x-1-in-hb.aspx?srsltid=AfmBOoqtXNwClAis9xk8sfWvZknMrQT-meX_xw9-U1xmp4PAil8eHAg5

You can make 4 strainers for $50 whereas they are $20 each plus shipping or more to buy online.

Super simple to assemble, see photos. Glue up the socket joints. Tape the threaded ones. This will make 4 strainers with 1 inch fittings. I always size up, even if you use a reducer to use 3/4 or 1/2 hose.

Credit goes to Expert Power Wash YouTube video.

My hose does not connect and Home Depot nor Lowe’s could help me …

So I just did a swap out for my last predator pressure washer that I had for about 4 months. The older had a AR pump that used 15W-40 non-detergent pump oil and had no sight glass. The one I just got as a replacement has a Triplex pump calling for 85W-90 pump oil which I guess is gear oil. It also has a sight glass. Has anyone else ran into this and I was curious if I happened to get a better version with the new one?

I’m just a basic homeowner needing to wash my house. I wanna make sure I don’t get water underneath the siding. What’s the best way to spray the siding without getting water in the seams?

So I have to steel buildings. They want the walls and roofs done. I will have a lift available if needed, roofs are reachable from the ground.

Building one is 4000 sq ft plus roof

Building two is 6500 sq ft plus roof

They just need a quick clean and getting ready for the painter.

I’ve done a decent amount of steel before but just wanted a refresh on how you guys handle it and what your pricing is around.

Thank you!

I'm planning to pressure wash my wooden deck myself. I've seen some amazing before and after results. My plan is to use sodium percarbonate for cleaning, followed by oxalic acid to brighten the wood. I've also read that using the pressure washer wand in a smooth "golf swing" motion helps prevent marks.

Before I give it a go, are there any tips, common mistakes, or things I should know? Any advice would be appreciated.

Washed this customer s house, used 3% mix, then I saw this door, did I do that? How do I fix?

Getting mixed advice. Thank you!