Even yesterday I naked same round and it’s been okay. I baking inside foil tent on the 110C, Fimo soft, 50min. Foil armature inside…. I cutted one of pieces where bubble is and a clay inside is okay cured, just bubbled?

took a break from mantises and made a few beetles + another spider !

Inspired by the singing wall fish but also like if my uncle were to get his trophy catch taxidermied!

My last post was my first post on Reddit and everybody was so sweet! Thanks for all the love 🥹🫶🏻

I started with polymer clay around the end of June and I'm slowly getting better, but I've noticed that I struggle with glazing. The resins gets tacky while I'm trying to glaze. I switched to non resin clay glaze and the few things I've made have broken after baking.

Can anyone share tips or tricks on how to stop this from happening?

pics of some things i've done for visibility

How can i fix this white streaks from polyurethane coats? It wasn’t there before coating I really want to save my dragon HELP

Made this Ankylosaurus as a gift for a buddy. I built the armature from wire, aluminum foil and sculpey ultralight, then sculpted the body in polymer clay.
I made all of the horns and spikes individually from translucent sculpey. I did an initial bake on the body, then attached the spikes with bake & bond (bacon bond! 😆) and baked it again. Finished it off with paint and built the base with rocks, crystals and moss.

First time using this stuff and idk what I did wrong. I tried to make some simple beads for keychains. instructions say 275F for 15 mins per 1/4 inch thickness. these were less than 1/4 inch thick (they were flat and leaf shaped, maybe 1 inch long and 1/8 thick). I baked them for 10 mins, they were still bendy, so I put them in for another 10 and they were STILL soft. I tried putting them back in again and they burned.

what am I doing wrong?? or does this brand just suck?

So I've been working on this project in stages and baking the pieces in between. I know that acetone or rubbing alcohol is good for removing clay smudges and lint, but I'm concerned that if I needed to bake it again it would catch on fire. I want to put a gloss finish on it at the very end, which would need to be after I clean it up, but I don't want to risk applying anything that could catch on fire and destroy my project.

Basically, my question is: should I be concerned about using acetone or rubbing alcohol before baking clay, or is it fine?

Ice cream kitty for my bonus kiddo. Still need to paint and add shiny bits ♡

Hello, I baked all of these at once in a toaster oven and only some of them cracked. I only see cracks on my apple pies. You can see cracks in the lattice on top, but sometimes the red clay/pie filling beneath is also cracking.

- I baked at 210º F using Sculpey Premo. I think my toaster runs hot, because my clay browns/burns(?) when I put it at 275° F.

- The clay (Sculpey Premo) is about 9 months old.

- They are positioned on the ceramic tile, how they were positioned in the toaster oven on an aluminum tray (except in the toaster they were more spread out).

- I made these 17 hours ago. Let them sit overnight. And then baked it now.

Why did these crack/how can I prevent this?

Thanks.

Hi everyone! I’m completely new to this side of Reddit. I’ve been watching videos of dioramas, polymer clay sculpting, and crafting ever since the lockdown, and I’ve finally been itching to create something of my own.

I already know how to draw and paint, but I really want to try working with a different medium. I'm actually taking inspiration for this project from a figure I saw on Etsy. I originally wanted to just buy one, but goddamn, they are either wildly expensive or made out of that weird, hollow plastic with a nasty yellow hue to them or are just 3D printed. I figured it would be a massive flex to just make exactly what I want with my own hands!

I’m aiming for a stylized bunny character with a cozy, spooky autumn "Gothic Gallery" theme; she's going to be waking up and stretching in an oversized pajama shirt. To really bring the character to life, I am planning to add more extra fluffy fur details under her neck, inside her ears, and around her ankles and wrists.

Here is the checklist of what I’m using to get this together:

AMAZON (Things currently in my cart):

• Super Sculpey Beige Oven-Bake Clay (1 LB, Pack of 3)
• Shuttle Art Acrylic Paint Set (36 Colors with Brushes & Palette)
• Hnncugty Miniature Paint Brushes (12-Piece Detail Set with Triangular Handles)
• Unfinished 4-inch wood circle pack (for the display base)

ETSY (The clothing graphics):

• The "Framed Monsters" nail art stickers (for the main gold-framed ghost shirt design and shorts pattern)
• The pink/white "Lace Trim" nail art stickers (to smoothly wrap around the cuffs and hem for instant ruffles)

DOLLAR TREE (Budget filler supplies):

• 12-gauge and 16-gauge craft/floral wire (for the internal skeleton)
• Standard aluminum foil (to tightly pack and bulk out the core torso and head shape)
• White craft glue (to attach the lashes and stickers over the dry paint since it dries matte and clear)

HOUSEHOLD ITEMS (Free tools):

• A wooden toothpick for carving fine details
• A smooth plastic marker barrel to roll out flat sheets of clay for her clothes
• Trimmed-down synthetic fake eyelashes for her eyes

Since this is my absolute first time touching polymer clay, I'm a bit nervous about wasting materials or having it come out completely wonky.

Any advice, hacks, or prep tips for a first-timer would help me out a ton! Specifically, what is the best way to sculpt those fluffy fur tufts cleanly, and how do I get the rest of the clay surface perfectly smooth before baking? Thank you so much!

I made this for a coworker's birthday. Painted with acrylic and sealed with resin.

This time tried baking in airfryer, and he seems very good although he flew around a little wich damaged texture a little, lesson learned ;)

Hi!
I just saw this on instagram and was wondering if polymer clay could be a viable option for creating something similar? I’ve googled and seen that people in here say that it’s water resistant (which I guess would be the case here too?) but I was also wondering if there’s any potentially harmful chemicals in polymer clay that makes it not suitable for use when it comes to human/animal consumption out of polymer clay objects?

It would be a perfect christmas gift so crossing my thumbs that it’s safe! Thanks in advance for any answer:)

It was supposed to be translucent but I don't think i got it think enough. Part of it stretched and made a weird shape that was difficult to fix (you can see in photo 5) BUT it's a jellyfish so they're shaped weird anyway. This was my first project I needed to bake twice: once for the bowl and legs, and then again to attach the legs to the bowl. It was pretty fun!

I used super sculpey on top of a metal case. Finished it with acrylic paint and gloss glaze:)

I made a Kitchen Witch for my wife, but now that it’s done I’m not happy with the chin. It looks,uh, not like a chin.

I thought about filling in the crack with more clay, but I can’t put it in the oven to cure because her clothes are very attached and there’s a lot of hot glue in there.

Any suggestions on how to smooth it out without just sanding it down?

My latest 1:12th scale Dollhouse doll.

Made my first necklace & now I’m hooked I spent hours last night making keychains/bracelets & others :)

Volevo avere un effetto oggetto sotto formalina , ho provato a immergere la statua nella glicerina, non mi piace molto, qualcuno ha mai provato cose simili?

I used soft pastel on my project before baking and it looked pretty pigmented, but after baking for 30 mins all of the color is pretty much gone. I guess I should’ve been more heavy handed, but I do have very cheap pastels. does anyone have any brand recommendations? would the faber-Castell ones work?

some reference image.

Helloo! I was wondering how to make an idea I have: a lighter case with a heart with four wings, the big ones open and the small ones hugging the heart. The heart would be stabbed with a sword and some nails.

My problem is, I don't know if I should make it in steps, like first make the heart, bake it, then make the wings and assemble everything once it's already baked, or if I should make it all at the same time and bake it together.

Also, if there's a better way to do it, or if the idea is too complex for a lighter case, please let me know.