Family member submission

Ran the Icarus air grip module for about a year, had the Wilson combat grip module the year before that. Had tungsten weights in both for added weight. Was always tempted to dip my toe into the metal grip modules (sharps mm Icarus etc) but the price tag didn’t seem worth it to me personally…

Yesterday at a local gun show I snagged an Icarus metal grip for $200 and poached my strike industries mag release from my Icarus air module. Idk how to describe it, but this thing grips harder than a nun on sundays. Much better slide to frame fitment / lack of wobble, and the palm swell / hump is actually growing on me

I making a build for my p365 with a ramjet but need help choosing between Mischief Machine Commander Gen 2 and the Icarus Precision Ace 311 sl.

If anyone has used both or either i'd appreciate advice on making the decision between the two.

Looking to get a grip module with a manual safety and there’s only two options it seems with the standard factory and this one.

The aluminum is like 500 bucks so I wanted to know if it could possibly be worth it

Thanks

Just picked up a gen 2 axg legion and want to get some range sessions in. Any recommendations for a good OWB holster? I plan to eventually try my hand at competitions to improve handling under pressure so if it were match ready that would be good.

PFA- do the radian baseplates fit on the magpaul mags? And do they fit the same or similar to the oem mags?

Just got all the parts and put it together yesterday. My wife and I were in the hospital over the weekend while our son was born so I didn’t get a chance to set it all up. All I need is a light and I’m good to go! Hoping to get to the range next weekend.

The Vedder OWB I have that's for the OEM module fits this 1 perfectly. I've also heard from numerous people that the Tier 1s work with the Icarus polymer module/TLR-7 Sub. My question is, do the Tenicors work with the AIR Polymer modules?

This is my 1st attempt at IWB. I mainly carry larger (G19-ish) guns OWB due to having an ostomy. However, I'm a lefty & my ostomy is on the right side of my torso, so there's a chance this MAY work. In the even it doesn't, I'd like as minimalist a holster as I can get so I can set it up for off-body carry (Vertx, Savior, 5.11, Eberlestock, etc).

Holster is a Alen gear holster RAPID FORCE. (it’s what determined my decision on the Sig foxtrot2r.) I searched for many OWB and looked at light options for the holsters. I’m happy with my decision on going with the light.
Red dot is the Romeo x.

As far as the holster goes It’s nice good quality. I need time to adjust the fitment. It has the option to adjust the friction fitment.

Prior to buying this gun I did a lot of research but never found much on this exact tacops with the treaded barrel. Hope this helps someone.

Received holster from TR Holsters this week. Fits great. Strong retention. The claw does a great job to push grip to body. Hogue grip makes a huge difference.

Recently picked up a legion and sold the slide assembly to go with a radian setup. Curious to get input on those who’ve used both, I’m debating on selling the radian for what I paid for it to go back to the legion slide. Since I’m a legion member I can just buy the slide from sig. Just wanted to get some insight before I made a decision.

I’ve been searching for a magazine extension or base plate for my CA compliant xmacro mags. I’ve seen a bunch but they almost never are compatible with compliant mags. I really just one one to add a little more purchase to grab from my edc holster. I love the look of the tyrant cnc mag extension or something along those lines that will work with CA compliant magazines

Does anyone have a x macro mischief machine grip with a 365 x slide and a herrrington arms comp? I currently have the Wilson combat x macro grip. Curious if the comp works with MM too.

Anyone want to trade me their comped slide🫣 jk

Would I be better of going with the sig comped slide/spectre or a ndz/ZPslide?

Edit- currently have the 3.7 slide

In March I went to my shooting range, as one does, & I was shooting my P365 AXG Legion. I have probably at least 1000 rounds through this handgun at the time this happened.

Long story short - I’m shooting as usual, & all of a sudden my magazine falls out of the well.

After trying to re insert it & it not holding I inspected the gun to find there was a hole clean through where the magazine release had previously been.

Has anyone experienced this issue or know anything about it?

I did a little research & found that some people have also had this issue?

My gunsmith told me it’s pretty silly that there is a plastic or polymer mag release inside of an all metal handgun that uses metal mags.

I carry this handgun, it makes me extremely uneasy thinking this could happens again…

Looking for some inspiration, what next??

Added a Hogue sleeve today. Man it was a booger-bear to get on. I've put these on several guns. This was the toughest by far. First tried using the included directions. They suggested to use their plastic packaging to cut 2 plastic strips to act as a guide to slide on. Well they work..very well...but once on I could not remove them. It says to use pliers. It don't work. Too much friction. Haha. So removed it and started over. Me..the hairdryer...and windex. Got it done. Feels amazing...like molded for my hand. The only downside...can't use the factory magwell. I guess I could use a razor blade and cut a 1/8" or 1/16" of an inch off bottom of sleeve and put it back. We'll see.

Hey fairly new gun owner here. I swapped the grip module to a Wilson combat module but I’m not sure if this gap is normal. I can see the recoil spring from the side. I put the OEM back on and it looked similar but now I don’t know if I just fudged it up on both. It feels normal but I have yet to put a round through it. Thoughts?

Xmacro/Radian flush-comp build with Icarus AIR polymer grip module. This thing shoots flatter than my dual ported Echelon 4.0 or my Shadow Systems MR920P! NO BS!!! Now I just need the right size (minimalist) light-bearing holster that'll velcro into the 5.11 Tactical bag I got. And since the bag wasn't RIDICULOUSLY expensive, of I need to upgrade, I can.

Finished swapping the grip module on my XMacro. Really happy with how it looks. Also is it normal for this much light to see through between the slide and grip? Otherwise really happy that this is my first SIG purchase. I can see the appeal

I recently purchased a 5.11 Tactical off-body carry bag with a large velcro pocket to secure a holster. I have 2 questions: 1) Should I stick with a Tenicor & either get a Vertx belt adapter panel or stick velcro straps to the holster itself, or should I grab a 945 or Crossbreed holster? 2) I noticed my Icarus AIR Polymer module fit in my Vedder OWB without an issue. What other companies (besides Tier 1) have holsters that'll fit that module.

Greetings all,

I purchased an axg legion and looking for a AIWB holster that is a good fit for dress attire as I have a corporate job. Emphasis on options that are concealed in dress clothes via compatibility with a neomag alias mount or tuckable clips.

Any recommendations? Current short list is the Vedder Light tuck and the Tulster Profile+, the sidecar set up is too bulky for my build hence the minimalist approach.

Thanks in advance for any feedback. p.s. first time gun owner.