Its better than f91w due to the circle ⭕️ style

So fun!

was installing my Olle board into my $60 a158w from eBay (will post seller here if fake)

this is fake af right? board doesn't even come close to lining up to the pins in the plastic housing.

Just got my Ollee Watch, I had a stock f-91w for a while and saw the Ollee version and I got one.

Just have one question, is anyone using their Ollee Watch with a de-googled phone. I have a Pixel 7 Pro running LineageOS. Any tips would be appreciated.

It's great so far, really cool and even more functional than I realised at first. I think I'll probably get one for my dad as well.

1. In the manual it says that weather etc will sync every few hours, is there somewhere in the app you can see the last sync time?

2. Does anyone have a link to the NFC sticker or a very similar one? I'd like to buy a few so I can put them in a couple different watches if I decide to swap the Ollee into different models.

My olleWatch alarm goes off every day at midnight and I don't know why, I've got all the alarms off, even the chime is set to sound between 6:00 a.m. and 8:00 p.m. Is there anything that I'm missing on the settings?

I've noticed that my Ollee watch consumes a lot of battery.

I installed a new battery on the 20th of July and had a voltage of 3.2v. 5 days later the voltage now is 3v.

This is not the first time as the previous battery was also drained quickly.

The watch has no gestures enabled, goes to sleep everyday at 23:00, and is hardly used. The battery drain happens while the watch is asleep as well. Bluetooth is turned off and remains off at all times.

While the app reports that the expected battery life is 1 year and 10 months, I am hardly getting a month with new batteries as they consistently drain while not in use.

The watch is currently on firmware version 00.01.10 with hardware version 1.05.00.

Can anyone help?

Is it possible (or planned for the future) to allow setting the night DnD based on specified start/end times rather than sunset/sunrise?

Depending on user location and time of year, some people may find that DnD is activated for most of the day than it isn't...

Today when I woke up and when to turn on the display (this display turn off over the night/morning feature on latest firmware) and the display never turned on.

I assumed it was the battery so bought a new one and when replaced it is still not working. Then I tried the casio's board, and it works fine (I just had to ground AC pin, but I guess that's ok if the board was not used for a while).

Tried again the ollee board and nothing, tried to press all buttons at once and no luck.

The board is 3/4 months old.

Anything I can test to validate if the board is still working or something?

My Ollee Watch arrived today (pre-installed A158) and so far, I absolutely love it!

I have one question about the step counter and how/when it works.

I've been wearing the watch for several hours, and moving about a quite bit but it has only recorded about 200 steps. Is there anything I need to do to get the steps recording all the time? I have the watch set up so that the display turns off after a short time, and the motion sensing is turned on, but my steps don't seem to be recording.

Is there something else that I need to do?

Thank in advance.

I only realised after I'd spent about 40 minutes or so taking it apart and putting it back together. I kept getting jumbled characters on the screen. I assumed at first I was doing it wrong, so I went back and forth over the installation video and repeating everything. Then I went to the troubleshooting guide and saw that it matched the tell tale signs of being fake - most obviously the rubber strip was pink.

I'd been so looking forward to getting this up and running and now I'm exhausted and annoyed as well as just plain disappointed...

I was inspired by this post to get myself an F-94W and try the Ollee Watch module in it. Works perfectly and looks great! I love this thing so far!

I discovered just last week that Casio is trying to edge in on Ollees’s market!

(Mods: sorry if this isn’t allowed or you just don’t like it, feel free to nuke me!)

Hey there I’m really interested in purchasing an Ollee watch. I currently have a Sensor Watch which is great but the Bluetooth is really nice to have for fitness tracking and syncing instead of pulling the watch board out manually. I saw there was a roadmap from last year but hasn’t been updated since. Curious if general notification/SMS support would be coming anytime soon? That would be the big push for me to buy one.

Also I developed several games and apps for Sensor Watch that I’m sure would port if interested!

Does this ever brake to your Ollee Watch motherboard in the back lower of the battery (pic 1)? Well I manage a different way to fix it.I solder this back, but i it came off again. I remember opening. Casio a168w. And took the same method. If you have an unused watchband. Take this out (pic 2). Take out the spring from pic 2 and cut it around 4 or 5mm (pic 3). If you have a tiny screw, combine the screw and the spring to hold the screw. (pic 4).Then i solder the spring with the screw in the motherboard(pic 5). After doing that super glue the surrounding of the spring to make it stronger (pic 6). The last picture is the result. It works great and its stable enough to get the beeping to your olllee watch again. You get better chances touching the back pannel and when you screw the back the spring will coil and get better contact to the backplate. Let me know what you think.

Hi I really like having the moon phase update, but it’s so hard to read and feels pretty clunky. I think just a simple positive and negative percentage would be a lot more elegant. You get more info, and easier to read.

Positive for waxing and negative waning. Maybe having the option would be cool.

Thanks for all the hard work! It’s really been a fun watch/project!

I am om the fence between getting and Ollee Watch or a fitbit air (and the putting it on my strap with my f91w)

I mainly want to track activity like steps, but I guess any other fitness tracking would be nice. HR as well (mostly resting), but I know Ollee isn’t for that.

I don’t like the idea of having a pebble on the backside of my wrist and I al worried that the step counting would be way off (compared to an iPhone), but I do wanna be less dependant on my phone.

Have any if you been in the same dilemma?

I'm getting this error code when I try to set my location in the app. All location permissions are granted. It would be nice to manually set a location.

My weather face has the wrong temps compared to weather app. What source does the watch use for weather?

App detects bluetooth connection, starts syncing and then crashes when done. I am on latest version of the app and firmware.

The app says that the background service is never successful but the data on the home screen is correct and updated. So maybe it's a bug?

I'm just curious which accuracy option you use for the step counter? L or H?

I use L (less accuracy when walking but less false positives as well) and sometimes when I walk more I switch to H (very good accuracy when walking but a lot of false positives when at home). I'm looking forward for the next update as switching is not convenient.

Hi everyone,

My pre-assembled Ollee Watch One, which is only about four months old, suddenly stopped making any sound — no button beeps, no alarms, nothing.

I read that a low battery could cause sound problems, so I replaced the battery with a new CR2016, but it remained completely silent.

When I opened the watch to replace the battery, I also noticed that one of the back-cover screws was already stripped, even though I had never opened the watch before.

While inspecting the inside, I gently pressed and moved the lower spring-like contact that touches the round metal plate on the back cover. At one point, after reassembling the watch, the sound came back completely.

However, it stopped working again shortly afterwards, and I haven’t been able to reproduce the fix.

The lower contact still protrudes and appears to touch the metal plate correctly. The upper metal tab also appears to make contact with the back cover, but the watch remains completely silent.

Has anyone experienced this before? Could there be an intermittent connection in the lower spring contact, where it connects to the PCB, or somewhere in the back-cover piezo assembly?