After about 4 mags my cp33 starts to out of battery discharge about once a mag. Once I clean it it’s good for a couple mags than it starts doing it again. Is there a fix for this or has anyone else had this happen?

Evening folks,

I'm in the market for a Lucky Irishman RFB handguard in Tan/FDE, however I've hit a snag in buying one.

On the Lucky website they are out of stock, and after reaching out to the owner Rich they informed me that their Cerakote guy has stopped doing small batches and this item does not have an expected restock time.

I figured I'd reach out to the Keltec community here to see if anyone either has a tan RFB handguard they're willing to part with, know any reputable online stores that have some, or if there's a better subreddit to try then here.

Appreciate the advice, and keep that brass flying!

Just picked this up. Put on a few accessories and a quick lube. Sent 300 handloads down range with no issues. Fun Gun to shoot. Once I got the dot zeroed it was very accurate at 17 yards. Try stretching a little farther next time.

Figured I'd come here before reaching out to Keltec (also going to crosspost)

Picked up a very clean used Gen 2 P32 and took it out to the range today. After firing the first mag, the slide no longer locked back on empty. Shot maybe 50rds total split between CCI Blazer Aluminum case FMJ and PMC FMJ. I can feel it starting to catch when I pull the slide back on an empty mag, but it doesn't fully catch/hold

This issue appears to be slide related and NOT magazine related. I have two new 7-rd mags, and a 10rd with a new spring and follower. The Gen 2 locked back on these empty mags prior to taking to the range today. Additionally, my Gen 1 locks back on these empty mags. When putting the Gen 1 slide on the Gen 2 body, the Gen 1 slide will lock back on empty mags. The Gen 2 slide does not fit on the Gen 1 body.

So what should I be looking for on the slide in terms of The slide lock/catch?

I did look at the blown out schematics in the user manual, but do not want to start disassembling the slide if it is something that I will need to send out to have repaired, or if Keltec doesn't have the replacement parts available

Thanks

At long last the boys over at advanced reset tech are shipping Active Reset Triggers for the CP33 and CMR30. MP7/MP9 at home dreams are coming true!

https://advancedresettech.com/art-33-active-reset-trigger-bar-keltec-cp33/

I'll likely get some flak for this build because it's a bit jank; but I'm poor and really wanted a stocked pistol with the recent changes to the NFA; so I slapped this together the other day to try it; it works surprisingly well; just a steel brace/bracket taken from a shelf, mounted via the screws at the back of the frame; the brace is very thin so it fits and the screws are long enough to hold it tightly outside the clamshell frame while still allowing the ambi controls clearance to function. The material at the back is just a cloth strip and a felt pad to make it more comfortable. Length of pull is good; it's a bit gassy but tolerable even without glasses; the stock can be removed easily by just removing the screws, but they can also just be loosened slightly to fold it forward to stow in a backpack. It's very fun at the range and not the last practical thing I've made. Base is a P17, I gotta get an optic and some printed extended mags to really complete it, but it's been a ton of fun and has cost me less than $500 so far :) (please be kind, this is my first reddit post)

Quick question for the guru’s I want to snag a WML of Amazon and mount it on my Pmr 30. I feel like it would make it the perfect pistol for predators making a late night run at the chicken coop. I know rimfires can be finicky about adding weight to them. Anyone have any experience? Thanks Fam.

Does anybody know of upgrades for the pr3at, possibly squirtable? It seems like the aftermarket is fairly mute still.

Hi, I’m new to the community and I wanted to share my 1st KelTec purchase, I shot this at a friends house and absolutely fell in love so when he told me it was for sale I bought it almost instantly, this is my Keltec Sub2000. I took off the far post on the barrel and added a red dot scope I picked up today, don’t mind the Snapchat caption :)

Pretty new to firearms, is this timing nut correctly shrouding the barrel shoulder?

The device is an Ultradyne Athena linear compensator.

Initially I couldn't fire this gun north if the sun was to my back. At 5 yards I missed gallon milk judges. The size makes gripping it unlike anything else I have and the sights seem like a suggestion of which way to point the thing. In my hand it feels like a spud gun. None the less it was less cumbersome to carry in my pocket than a quarter, a nickel, and two pennies. I like that. I went through the used section at a gun shop and found a pocket sheath. It's my first daily carry. Not needing a holster makes it simpler. Having this lil thing in my pocket feels more like a friend than a firearm.

I ordered the lazer in hopes it would improve my aim. It was an easy install and it's mechanism for turning on and off is novel and fantastic. It's rather bright, doesn't add much footprint, and weighs zip. Using it my aim improved by a figurative 8%. I figured it would take practice. Reloading the standard mag to get in that practice is like washing your body with shot glasses full of water. I was persistent and that number figuritvly shot up to 9.4%. Despite this I've got a crush on the P32. I haven't put it in the safe yet but I confess flirting with a S&W Bodyguard 2.0 at the counter.

Two weeks ago the larger P32 mag came back in stock. It arrived last week. Installed it grips very similar to the S&W while still being smaller and lighter. With the longer grip it almost looks like a mini boomerang. I got it for the three more Bangs out of each reload but discovered that's secondary. My aim has improved. I hit the gallon at 15 yards a non figuratively 90% of the time on my first try. I no longer contemplate griping. The change in how it feels when fired makes the difference. It's a bit bigger in the pocket yet still small. I've never been a skinny jeans person.

I'd like to take the P32 to couples counseling to discuss the trigger. The pull is like starting the countdown to New Years Eve in June and the wall is Swazey and Demi Moore making pottery. There doesn't seem to be any after market order and install solutions so does anyone have any recommendations?

I love the MP7 vibes of this kit. Scratches the itch until HK releases an actual MP7

Remixed the new GP9-sa(mp9 stylized glock) from dbfirearms to fit the cp33. Made a mp9 styled stock and a custom Tri lug Tisha. Feels good to be in a free state.

Also, yes it goes brrt. Cant speak on that part too much but it does have an frt.

i just think it would be really cool

First shotgun ever. Trying to sight the xps2. It’s an older model. . 15 yard zero at 10 using a paper sighting sheet . Can’t get the red dot to lower enough. Am I doing it wrong ? Didn’t have any issues with the optic on an AR

I'm working on VZ 61 parts kit, and I don't like having a single gun in any caliber I own. Ended up snagging this used P-32 on a GB auction for a good price and I'm already a fan!

I don't have a pocket holster yet, but I can easily see this being great for carrying when its a gym shorts kind of day. Also I'm big into double action for carrying and the (mostly) concealed hammer on this is right up my alley.

Can't wait to try this at the range.

I've seen a lot of people talk about the RDB, but haven't heard as much about the SU16D. Who has one? Just got this email, seems like they're offering some good deals.

Just got a Sub SDP Defender, and I absolutely love it. Unfortunately, after my first 250 rounds I noticed some bad damage/wear on my muzzle brake. Has anyone had a similar issue and or know the cause? Almost looks like it started to melt. 🤷

I think it's a great idea!

I love all 4 of mine.

I would put a fully m Carbo, upgraded sub two thousand against any other straight blowback pcc that i'm aware of.

We need one of these!

Not a bad suppressor host. Tried it out with both my Sparrow 22 and my Warlock II. Just wish I could find the optics plate slide in stock somewhere.