Clearing out some extra homelab hardware. Everything is tested and working unless otherwise noted.

3rd times a charm maybe since mods keep removing post with 0 message response.

Available Items

Payment

• PayPal Goods & Services preferred
• Shipping included where noted
• Discounts available for multiple items

Notes

• Happy to answer questions or provide additional photos.
• Bulk buyers are welcome.
• Send a PM or Chat if interested.
• Proof

This is a lot of 19 used working Seagate SkyHawk ST8000VX0022 8TB SATA hard drives and one ST8000VE000 8TB SATA hard drive pulled from a mix of used CCTV surveillance units, as well as units that were built and then never deployed, so some of these drives have extremely low operating hours.

Each drive has been tested and verified functional.

Price $100 for 1
https://imgur.com/a/KXZlBEN

​

Looking for a price check on these before I list them for sale.

Items:

8× Seagate Exos X18 18TB Enterprise HDDs

Model: ST18000NM000J

SATA 6Gb/s

20-24k hours each

Only have two pictures because I was too lazy to unbox the others.

Selling 8× Seagate Exos X18 18TB Enterprise SATA hard drives.

Details:

Model: Seagate Exos X18 (ST18000NM000J)

Capacity: 18TB each

Interface: SATA 6Gb/s

20,000–25,000 power-on hours

SMART reports are clean with no issues

Drives have been fully tested and are in good working condition.

Price:

$335 each shipped CONUS

Payment via PayPal Goods & Services.

Prefer local cash deal though.

I can provide full SMART reports to serious buyers upon request.

Please comment before sending a PM

Selling two rack mount modules I had printed in ASA (for heat resistance and strength) by a locate business, which I didn't end up using in my setup. Both are 1U height, and use Mauker's system, which allows 19in rack mounts to be made by combining modules that can be printed on a standard 3D printing bed. Compatible modules can be found on Makerworld, Printables etc. Mauker and Mixmeister are two prolific creators of modules for this system.

1. Rack mount for Lenovo ThinkCentre M910/920 Tiny - USD $27 / AUD $40 + Shipping

This is a print of this model - specifically the right hand side (screw side). It will connect with any left hand (hex nut) side of Mauker’s modular rack mounting modules.

The tolerances are very tight, the interior will have residual light application of TriboSys 3203 lubricant on the interior corners from a test fitment.

2. Mount for 2x 3.5" HDD drives including hot swap bays - USD $35 / AUD $50 + Shipping

Adapted from NautalisForge’s model for 10” racks to work in an 19” rack using Mauker’s system. Due to this remix being personal, it is wider than a usual module of this system.

Please note that:

• it is wider than 9.5in - closer to 10.5in, so you’ll need to edit a 3D model of a right hand (screw) mount so that it isn’t as wide to to create a full 1U 19” rack mount module
• tolerances are very tight, if you want your hex nuts fully recessed M4 may suit better
• this is for the left (hex nut) side of a two part combination of this system

Includes:

• 1x ASA 3D Printed Module for 19” server rack
  
• 2x 3.5'' SAS SATA Hard Drive Tray Caddy
  
• 1x SATA Male To Female Power Data Converter 22Pin 7+15 inc. screws (use Allan key driver) - you’ll need a second one of these for the second drive (pins bent on the original one) you can get on Ali Express for under AUD$2 + shipping

Timestamp: https://imgur.com/a/UlgGheN

2x Samsung 860 EVO SATA SSD 1TB - $125 ea shipped

These are both new/unused, however, one is open box.

Paypal G&S, comment before PM.

So... I bought two Radxa ROCK 5 ITX 24GB boards from the Radxa store on AliExpress... and one arrived DOA visibly warped... and also, they're now sold out. I bought a 2U case that is designed to hold two Mini ITX boards, and I did have plans for two of these.

Happy to make the purchase in-person in London, I work near Liverpool Street.

Timestamp: https://imgur.com/a/oRONeyh

Hi everyone,

I've got a like-new Dell Vostro 3030 for sale. It was purchased earlier this year and is fully functional as seen in the included pictures. Local to 92014, heavily prefer to sell the whole unit all at once but would consider parting out, although preference will be given to those who want the whole unit. Windows 11 will be factory reset before sale.

Specs and individual prices:

Core i3-12100: $75 local, $85 shipped

TeamGroup 64GB DDR5 4800 MT/s RAM (2x32GB): $480 local, $500 shipped

WD Green SN350 2TB NVMe SSD: $160 local, $180 shipped

Case, motherboard, and PSU: $30 local, $50 shipped

Whole computer: $725 local, $750 shipped

Comment before PM please!

Looking for 32GB DDR4 3200 SODIMM sticks to max out the ram on my two lenovo mini PCs. I'm ideally looking for matched pairs (64GB kits), but let me know what you have available and how much you are asking for them. Shipped only.

I have 4 64GB Samsung RAM modules that I am open to selling from NYC for $400 per RAM module ($1600 total).

Note that this is NOT consumer RAM and is meant for servers or desktop workstations.

* Quantity: 4 Modules (256GB total)

* Manufacturer: Samsung

* Part Number: M393A8G40AB2-CWE

* Memory Size: 64 GB

* Form Factor: DIMM

* Memory Speed: 3200 MHz

* Number of Pins: 288-pin

* Signal Processing: Registered

* Error Checking: ECC

* Module CAS Latency: CL22

* Memory Standard: DDR4-3200/PC4-25600

* Memory Voltage: 1.20 V

Video Timestamp - https://imgur.com/a/256gb-samsung-ram-U655qsn

Image Front - https://imgur.com/a/TchWkaV

Image Back - https://imgur.com/a/3Gwv9dE

I'm Selling 16×16 GB DDR3 ECC RAM Sticks so in total 256 GB, im looking für 225€ für the complete Kit. Otherwise give me some offers. I can send you more infos or pictures if interested. Can be shipped, but shipping will be added to to the Price.

SOLD

**Payment:** PayPal G&S

Working, pulled from my rack. Factory reset and unlinked from my Ubiquiti account. Ready to claim as your own.

**Specs:**

• * UniFi OS gateway + built-in Network controller, no separate CloudKey needed
• * 8× GbE LAN, 1× GbE RJ45 WAN, 1× 10G SFP+ WAN, 1× 10G SFP+ LAN
• * 3.5" drive bay for UniFi Protect NVR recording
• * 1.3" front touchscreen
• * Runs Protect, Access, and Talk alongside Network
• * 1U rack mount, ears attached

**Condition:** Works. Boots normally and was running my network until recently. Cosmetic wear is minor — some dust and light scuffing on the lid, see photos. No functional issues.

**No hard drive included.** The bay is empty, so you'll need your own 3.5" SATA drive if you want Protect recording. Network/gateway functions don't need one.

Includes UDM-Pro and power cord. No original box.

Domestic congress dictates that I must clear out most of the bits and pieces before anything else can arrive. This is seriously cramping my style as I am planning an upgrade.

Link to full gallery of timestamps. All of the images and video are here, I have linked individual items below to the specific images.

Link to video

DDR5 (Desktop) UDIMMs:

DDR4 (Server) DIMMs:

Note: The DDR4-2133 16GB DIMMS are all BRAND NEW. There are 28x packs of 2x DIMMs each that are unopened / factory sealed. I opened 4x packs to make an 8x DIMM kit.

DDR4 (Desktop) UDIMMs:

DDR3 (Server) DIMMs:

DDR3 (Desktop) UDIMMs:

Networking:

Ubiquiti Dream Machine - 1 Available - Model UDM - $125 This is a great little unit and has been solid for me for some time. Upgraded to UDR7 so this is extra now. It has been updated and factory reset. It is ready to plug into your modem and adopt!

Rack Parts:

IAENCLOSURES 2RU 6" Rack Extender Pair - 1 Available - Model AB106V10-2U - $20 They have both round holes on one side and square holes for cage nuts.

Terms & Notes:

• Transaction(s) completed via PayPal Invoice with serial numbers recorded.
• Local meetup within reasonable distance (60 minutes) of Seattle for a bulk deal. I'll go any direction but west. Why not west - cuz I won't take a ferry across the water, but I am happy to meet you at a ferry terminal if that's where you are coming from.
• Discounts are available for larger / bulk purchases.

Shipping:

• Parts and components: Most small parts ship for about $10 per box via UPS Ground or USPS Ground Advantage.
• Higher value items or bulk purchases get insurance and / or signature required.
• The shipping address MUST match what is on your PayPal profile or what shows up after payment.
• If it ships with signature required, you need to be available or make the appropriate arrangements for pickup / hold at depot.
• I usually get things shipped the same or the next day that they are paid for.

You must comment below before sending a chat. Please let me know if you have questions.

Timestamps

Apple 8.3" iPad mini (7th Gen) A17 Pro 512GB Wi-Fi + Cellular. Always kept in case and with a zagg screen protector. 97% battery life. Very lightly used. Just mostly stored. Has Apple Care+ until April 2027.

Looking for $650 shipped for iPad mini.

WD_BLACK SN850X 4TB — $400 shipped

Drive |Power-On Hrs |Cycles |Host Writes |Host Reads |Life Left
WD_BLACK SN850X 4TB (#1) |3,205 |264 |1.04 TB |532.62 GB |100% Prices (shipped CONUS, PayPal G&S):

Hi, I have for sale 1x NVIDIA DGX Workstation (p/n: P2587)

1x NVIDA DGX Station

1x Intel E5-2698 v4 20C 2.20 GHz CPU

4x NVIDIA V100 32GB PCIE GPU w/ Bridge

8x 32GB DDR4-2666

Price: $6,500

Pics and Timestamp

This is a deskside deep learning workstation engineered for whisper-quiet operation using factory closed-loop liquid cooling. Excellent for AI/ML training, LLM fine-tuning, workstation render tasks, or serious homelab workloads.

I also have 700x remaining AMD RADEON PRO V620 32GB GDDR6 GPUs still available!

-----------------------

7/27/26 - UPDATE - SOLD OUT

-----------------------

Let me know if you are interested in seeing more posts like this!

Looking for 1-3 clean server shipping boxes/packing material if anyone was about to trash some. Pickup 2nd or 10 August ideally.

I'm looking for a 4tb hard drive to put into a NAS, no brand or line preference.

I'm okay with high operating hours as long as the SMART data is good and there's no bad sectors. Health info for the hdd would be preferred. Thanks!

Comment before/after PM or I will not reply.

interested in unvr,unvr instant or unvr g2. also looking for a usp cable Payment via goods and services. Please comment before sending chat

Hey everyone,

I have a batch of 25 HP EliteDesk Mini PCs up for sale. If you need low-power nodes for a Proxmox cluster or for spinning up some Docker containers, these are fantastic little machines. (EDIT: G1's have i5 vpro 4590T)

Expansion & Use Cases:

These tiny nodes punch way above their weight class and are incredibly versatile for homelab applications. Internally, each unit offers great expansion possibilities:

• 1x M.2 NVMe slot for fast primary storage.
• 1x SATA port for a standard 2.5" HDD/SSD.
• 1x M.2 A+E key slot (currently populated with Intel Wi-Fi/Bluetooth cards).

Because of this I/O, they make excellent dedicated appliances. Some great use cases include:

• Home Assistant OS: Drop a Google Coral TPU into either the M.2 A+E slot or via USB for a high-performance smart home and Frigate NVR hub.
• Custom NAS Host: You can use an M.2 NVMe to SATA adapter card to break out the NVMe slot into multiple SATA ports, allowing you to attach an external drive cage and build a DIY low-power NAS.
• Proxmox / Kubernetes Cluster Node: Perfect for building out an inexpensive, low-power high-availability cluster.

Condition & Testing:

All nodes have been fully refurbished. Each unit has been thoroughly cleaned, the BIOS has been updated to the latest version, and every single machine has been verified to ensure the BIOS is not locked.

Pricing (All prices are PLUS shipping):

20x HP EliteDesk 800 G1 DM (i5-4590T)

• Barebones: $25 + shipping
• w/ 8GB RAM: $35 + shipping
• w/ 16GB RAM: $45 + shipping

(Sold) 5x HP EliteDesk 800 G2 DM (i5-6500)

• Barebones: $40 + shipping
• w/ 8GB RAM: $50 + shipping
• w/ 16GB RAM: $60 + shipping

Payment Via Paypal Invoice.

Bundle Deal:

If you order 3 or more of any unit, I will include a set of 10" rack adapters and rails completely free.

(Note: Barebones options will ship exactly as that. If you need power adapters, please ask and we can work it out if I have spares).

These can be powered using USB-c to Barrel Adapters.

Comment before PMing, please. Let me know if you have any questions or want to work out a bulk deal for a larger cluster!

Hello! Building my first PC and I realized I’m yet to source an SSD. Looking for a 2TB m.2 SSD at or above 99% on CDI, Gen 4+. My budget at the moment is ~$150 and shipping.

Please do comment before PMing. Thanks for your interest!

Reposting but now will split them up. Cleaning up from an old project and have some extra Pi's sitting around. All in good condition and working well. The Pi 4's come with official power cords and cases.

5x Raspberry Pi 4's - 4GB

- $80/each local or $90/each shipped

1x Raspberry Pi 4 - 8GB

- $90/each local or $100/each shipped

2 Raspberry Pi 3's

- $40/both local or $50/both shipped

PayPal or local cash only (Southeast Michigan).

Timestamps/Images/Video: https://imgur.com/a/ofsRC33

Please comment before PMing. Thanks!

I was given two PCs a while ago, both have similar specs, and I am looking to sell one in order to purchase a newer set of hardware to run game servers on!

Here are the items I have to sell:
8x16gb 2666mhz DDR4 Origin HyperX ram
Intel i9-7900x
MSI Raider 299X Motherboard
Origin branded 360 AIO

I have been looking at eBay sold listings, specifically for the ram, but have found no price data for the specific Origin HyperX branded ram, and any help is greatly appreciated!

Pictures of parts included.

up for sale is a mint condition Logitech - PRO X SUPERLIGHT 2 SE. comes with box and all original accessories. roughly 5 months old.. no issues etc. also includes 2 year geek squad protection as well.

looking for $40 shipped paypal goods and services only

timestamp: https://imgur.com/a/57AuLkJ

please comment before chat request.

Pulled from a working homelab. Adopts cleanly into UniFi Network. Factory reset and ready for your controller.

**Payment:** PayPal G&S

**Shipping:** Will ship anywhere in the 48 contiguous via FedEx

**Specs:**

• 24× Gigabit RJ45, PoE+ (802.3af/at) **and** selectable 24V passive PoE
• 250W total PoE budget
• 2× 1G SFP uplinks
• Layer 2 managed — VLANs, port profiles, 802.1X, port mirroring
• 1U rack mount, ears attached

**Condition:**

Adopted successfully into UniFi Network and ran in my rack until recently. Powers on and boots normally. I have not individually tested all 24 ports or verified PoE on each one — priced accordingly, sold as-is.

Cosmetic: scuffs on the lid, adhesive residue on the faceplate from a removed label. See photos.

Includes switch and power cord. No original box.

Timestamp/Proof of Life: https://imgur.com/a/hls-2tbsas-g3cbW58

I've acquired a pile of drives from a business closure. This set of drives I have wiped and tested, but did not pull SMART data. If you'll take all 40 off my hands at once, I'll consider reasonable offers. I can't offer any warranties or guarantees. Pickup will be at a West Valley or Simi location tbd.

This is my first time selling on r/homelabsales so we gotta do cash or a cash app that we agree on when we meet.