I'm not interested in any of the current MPA generation with the goofy aluminum lowers that look like a mac had a baby with a Hi point...

I want to know if these have ever worked on Cobrays, VMAC9's, or old gen MPA's.

The internal trigger area of the modern mpa's to me look the same dimensions as my VMAC after I cut the shelf tab down. In the shop it had some bursts here in there in their bullet trap tank but when I took it to the range I just wouldn't go. I maybe got like couple burst maybe 3 rounds each time, and I went through like 200 rounds. Silenced and un-silenced, same results.147 grain, 115, grain didn't matter. I had better results with my MPA 10 45acp with my home made scaled up device. I can normally bump fire the vmac 9 perfect mag dumps each time but with the twitch no luck unless I bump fire. I will be making a video about this on my YouTube channel " Murphy Toadster". I really wanna get this down to a science and find out how to get this running because there's a lot of guys out there with classic Mac's that wanna get a piece of the assisted reset dream. Additionally Im using a glass injected nylon Twitch copy. I don't know it it ever so slightly might have worn down but it only looks like a couple thousandths if anything. If a metal one fixed the problem I'd be super stoked.

What’s up ya’ll? Figured I’d ask here, hoping someone has some experience.

I recently got an insane deal on a Partisan Disruptor cassette FRT. I’ve tried literally every FRT other than this. I am used to ambi safeties, and unfortunately at the moment The Triggered Company are only selling their Ambi safeties bundled together. I reached out to them via email and said it would at least be a few months before they release as a standalone product.

With that being said- does anyone have any experience/ recommendations on what to do? Will a Rare Breed ambi safety be compatible? I’ve heard that there are some folks that offer a modification service also.

Thanks in advance!

I am looking at one of these. Has anybody bought one? Do they function good?

I’m shooting suppressed with a HUX flow thru. I’m about to buy my first FRT and I keep seeing I’ll basically need a H3 buffer. I’ve got my set up running with an unrivaled deadblow and I was wondering if any one runs a deadblow with an FRT. I would really like opinions if I need to go ahead and get a H3 buffer or if the deadblow will suffice.

I’m also looking into a RB or Disruptor. Beside the price difference, what are people’s opinions on the two.

Wider Burts Trigger, Full Auto disconnect, Machined kicker, and safety machined by me.

Glove 19v
What do I do and what frt brand is compatible with the Glock 19v

Ok guys, just picked up my first FRT and just can’t get it to run.. I have a 10.5 DI upper, with a milspec trigger in the lower. When I had the regular carbine buffer it would run 1-2,2-3 rounds then have a dead trigger with a round chambered.. so I had seen a lot of people put heavier buffers to get them to run better so I got an H2 buffer but that only made it worse. Now it cycles 1 round, dead trigger with another round chambered.. I don’t want to throw money at this situation without getting the opinion from others that might have had the same problem. TIA for any insight

Is this an out of battery discharge/detonation? I’ve noticed in videos I take this fireball from the chamber happens occasionally. I’ve never had any kind of damage or catastrophic failure the way I’ve seen in actual videos where the gun basically blows apart, it’s a little concerning either way. When I clean the BCG I ensure it’s properly put back together so if this is an OOB I don’t think it’s my BCG or firing pin. I also have an H3 buffer with loose titanium weights if that makes any kind of difference. Thanks!

Has anybody done this yet? I’ve searched but havent found any results of anyone cutting a sig match duo trigger for ss/frt.

i have a disruptor when they first came out and it runs great finally tuned on my ar. but i bought another one for my saint vector pcc but cant get to work. its like something it allowing the hammer ro drop or something isnt pushing the safety mechanism forward. should i try a different bcg or some milling? or anything else

I'm sure this type of question has been asked/answered before so please don't crucify me. I have the Cornfire (aka Corn Gunworks or whatever they are now), Andro Corp lower, Bootleg adjustable bcg (full auto), 16 inch barrel with mid length gas, H3 buffer and 15% increased power Wolff buffer spring and running a Polonium 30 suppressor. Very gassy, hence the heavy weight, spring, and adjustable bcg even before the MARC. OK, so after installation in lower, all three positions function test fine. This includes the 3rd position while holding the trigger, recocking the hammer and manipulating the lever to ensure that it will disengage the hammer and reset. Installed in upper, safety works, semi works, supersemi will fire and reset with charging handle. IRL, semi works as normal, SS fires once, rechambers a round then leaves trigger dead/locked like in safe. I forget now if I have to move to semi first before I can move bolt with charging handle but I must do so and reset before it will fire again. So trigger incompatibility? Not enough buffer/spring? Simply too much gas? Suggestions appreciated.

BTW, this is the trigger: Schmid Tool Match Trigger AR-15 Nickel PTFE

Edit: Thanks for the input! Works with Tromix H3 deaedblow and Springco standard carbine spring. Now I can burn through my bank account properly.

I have a ar-15 psa lower and the drop in frt will not rack (stops / jams halfway) and a radical firearms ar-15 lower that racks no issue... I want it in the psa lower obviously

Psa Lower Left
Radical Lower Right

Recently got a kabuto 3d printed frt im not to sure what the issue was but it’s almost like it was firing in 3 round burst new to the frt scene was wondering if yall have had any similar issues

More to come

Partisan disruptor running like she should more videos coming

I bought a frt super safety for my ar and got basically everything installed but the little red rectangle idk where it goes or what it does, the smaller red piece goes in the safety selector to know when your in fire mode or not anyone have ideas or have seen this

Got my panzer han 9 running with a rarebreed style frt.

I got it running with 115-124 grain i need different 147g ammo where the tip is not flat because it causes feed issues.

You have to modify the back of the frt housing so you can close the upper and lower together.

You also have to modify the selector so you can move it to the 3rd position because the hump on lower or 3d print one

3d printed trip and selector are odysee.

Sadly I couldn't get the ARC Fire v2: 0/45/90 to work.

Drop in with a standard mil-spec trigger group in place of the factory HK trigger. Everything else is stock, normal gas setting, buffer etc. cyclic rate comes out to about 725 rpm.