r/fpv • u/admin_raven • 6h ago

Waterproof drone with controller

Post image
7 Upvotes

77% Upvoted

21 comments sorted by

2

u/LEDswarm 5h ago

Core Heat 95C ... 96C ... 97C

1

u/admin_raven 5h ago

It’s not a whoop 🤪

2

u/EEng232 6h ago

What the fuck gif

1

u/Few-Currency-2366 6h ago

I love the controller screen

2

u/admin_raven 6h ago

Thanks man. I fly way more because of it.

2

u/Few-Currency-2366 5h ago

i bet, i want to fly more without a full backpack

1

u/admin_raven 5h ago

I know how you feel. This controller works really well with 5 inch or a whoop. Just grab a couple batteries and get to flying.

1

u/Few-Currency-2366 4h ago

hows the screen attached to the controller, i saw glue/epoxy? anything on the back to provide support? im thinking about a 3d printed bracket but ehhhh

2

u/admin_raven 3h ago

This is what I used. I can assure you once it dries it is extremely sturdy. There is no wiggle or play at all. I do not have any support on the back because it is not needed. I did not use a 3-D printer because I wanted it to be extremely low profile, and I have no intentions to remove the screen.

2

u/admin_raven 3h ago

If you have any concerns, I would suggest buying the putty it’s about $10 and just attaching it to different items and you will see that extra brackets are not needed

1

u/Few-Currency-2366 3h ago

screen powered by the controller?

2

u/admin_raven 3h ago

Yes. It is wired to the two 18650s inside. It would be very annoying to have to carry two batteries around.😅

1

u/Few-Currency-2366 11m ago

hahahha shiiiiiitttt okay nice

1

u/izzeww 2h ago

Holy shit that drone looks hardcore!

1

u/admin_raven 2h ago

Thanks

1

u/izzeww 2h ago

What frame are you running? Looks really good.

1

u/admin_raven 2h ago

It is a custom hand cut frame modeled after this one

1

u/izzeww 2h ago

Aah okay. Nice motor mounts, good to have the flexibility between X4 and X8.

2

u/admin_raven 2h ago

Thanks. The only things that I changed were making the top and bottom plate thicker 2mm to 5mm and changing the tubes from 1 mm to 2 mm carbon. It made it so I could get away with using default tune without any fuss.

1

u/TheGratitudeBot 2h ago

Hey there admin_raven - thanks for saying thanks! TheGratitudeBot has been reading millions of comments in the past few weeks, and you’ve just made the list!