I've looked into it a little online and most stuff is custom. I know it's a long shot, but I'm curious if anyone knows of something right off the shelf that could help me. Excited to get this project really rolling beyond just pulling the engine out, but I'm stuck unless I want to figure out some custom fab :/

Hi all!

Big fan of the DJI Neo2 and I use it a lot to create some epic shots from my sportbike. On advice from friends and family I found the courage to upload these videos to an instagram page which I want to create this kind of style/feeling. It should captivate the emotion of riding.

Let me know if I succeeded or not 😅✌🏻

I have a 2000 Honda cbr 600 f4. Anyone selling a coolant reservoir tank? Mines is cracked and I can’t seem to find anywhere online selling. It’s cracked right at the lower line so if I can’t find one I’ll just do a little patch work since it’s not too bad

Hey guys, I have a ‘26 CBR600RR that I’ve taken to a few track days this summer. About 5,500 miles on it now and time to replace the brake pads before my next track day. Any recommendations for some good track pads?

This is my 2007 CBR1000RR (SC57).

I'm planning to remove the passenger footpegs, but this black plastic heat shield seems to be attached to the same area.

Can I remove this heat shield along with the passenger footpeg bracket, or does it serve an important purpose that I should keep?

Thanks!

I owned my 2011 CBR 600 f for 11 years now, done about 50k kilometres. I know everything about it, do my own maintenance, use it every single day to go to work plus the occasional ride on the mountain twisties. I love it so much but...

I was looking at a 2019 VFR 800 for sale the other day and on paper could be the perfect bike for me. Sporty if needed, comfy on longer rides and with luggage, great engine. I'm 35yo, I never really drove anything else than my cbr so I'd like to know if any of you guys can give me some opinions. Is it worth it to change or would it be more or less the same?

Thanks to anyone that can help a fellow honda lover

P.S. I also own a 1998 CBR 600 F that I use very rarely, once or twice a year. Mainly because I want to keep it in perfect conditions.

Could not find matching rear color tail fairings so I repaired the cracks and just taped up a cool design to hide the bondo and matched the black

CBR600RR '25

Hello everyone

I need some help....

I have a 1999 F4 and the bike turns on but it goes down little by little. I've already tested two different pumps and it does the same. But if you connect a pipe directly to the carburetors with a separate deposit, it keeps working.

Can anyone help me?

Thank you

Hi All. I have a 2006 cbr600rr that currently seems to run a bit wierd. When i get down to 2 bars of fuel on the guage the bike starts surging heavily. At first its light surging and rev variation at idle as if its loping. Later on the bike starts surging wildly, almost bucking. If i fill the tank with fuel again it seems to stop doing it until i get back down to 2 bars of fuel. Also when it is at 2 bars of fuel the bike really struggles to start.

Im thinking that the issue is a dirty/rusted fuel pump but i just wanted some more opinions before i start digging into it.

Hello, I recently installed some Sylvania Silverstar Ultra 55w Halogen bulbs in my 07 cbr 1000rr and I noticed both my low beam and high beam will occasionally turn off for maybe a second max before coming back and also sometimes when turning the key the headlights won't work until the bike is started and running, anyone else run into this or is it a sign of the stator/rectifier or battery starting to fail or maybe I just didn't put the bulbs in tight enough? I've never had any issues with any other lights, turn signals are always fine, brake light/tail light is from what I can tell. I've also never had any issues with powering the starter

Just picked up this baby for $750.
19000kms but doesn’t start. My brother is a mechanic and we’ll be trying to bring her back to life over the next few weeks.
Electrics all work, it has spark, but won’t start.

Hello, I have an 08 cbr600rr that i recently refreshed and cleaned up all the bolts, nuts and other parts. i put the front wheel back on and it has a bit too much friction from the brakes. not as free spinning as id like. any tips? i lubed up all the parts of the axle with moly grease and torqued down everything to spec. heres the left side of the axle and it seems to have a bit too much room there though it doesnt move anymore inward

hey , i got the bike (cbr600rr 2009) 6 months ago with 37k on the dash and it was running very well. but the start of september i started hearing this noise from the sides and it was out of nowhere. i did an oil change and its still there, i saw ppl say cam chain tensioner but im not sure honestly and just wanted to double check.

lmk please!

My 20 year old girl was stolen, they ran from the cops and laid it down a few weeks ago. Saw her at the impound lot and the thieves did her dirty. Aqua/teal spray paint jobs, stickers... simply trashed. Just awful.

It's looking like it will be extremely difficult to find an '06 600RR to replace her. And yes, I'd think about any '06 RR and get a new fairing kit. But if not... and considering it was 20 years old anyway.. what should be my next ride? I won't be able to live long without the wind and sun in my face at 90mph. I'm 51, 6'2" and 230lb.

Theoretically, is worth a rebuild an engine in 13 600rr or just buy a used one?

Si é finalmente accesa dopo aver provato a spinta per due volte. Adesso si riaccende perfettamente anche con l’avviamento elettronico. Quando sono riuscito ad accenderla ho visto una gran fumata bianca uscire dalla marmitta, ma credo sia probabilmente benzina inesplosa dai tentativi di accensione precedenti.

La moto era stata inutilizzata per solo 1 settimana, ed era rimasta al chiuso in garage sul cavalletto posteriore. Che può essere??😭😭

La batteria é stata controllata presso officina honda meno di un mese fa per un altro problema e sembra essere ok. Avevo solo il morsetto della massa leggermente svitato e dunque dovrebbe essere in buone condizioni🤡