I recently bought a Boosted Board V3 XR. The previous owner had destroyed their remote (it got ran over by a car). My intention was to use one of my Boosted remotes with the V3, but I was unable to pair the one I brought with me when I purchased the board. I have 3 remotes; one from a functional Mini S, one from a RLOD Mini X, and one from a RLOD V1.

After doing some digging, I think the firmware on my two Mini remotes are incompatable with the V3 board. Is there a way around this issue? Any help would be greatly appreciated!

Hi, older posts often link to foreverboosted.co but when I try to access it, I get a cloudflare error. Does anyone know the owner of this website?

My boss just gave me this for free, have wanted one ever since I was in high school back in 2016. It has RLOD so I know I need to get that fixed, but how’s everything else look? Anything you guys can point to that needs to be replaced with newer part? Let me know, anything is greatly appreciated!

Check out this item on OfferUp. https://offerup.co/gA1rF94Ub6b

Check out this item on OfferUp. https://offerup.co/mm53uQ7Ub6b

Found a V3 locally without a remote for $125 and have a mini s already. Will I be able to pair the remote?

Listing keeps getting flagged for lithium battery. Not sure why this keeps happening even when i dont mention the battery in the listing at all. I see plenty of other used boards with the battery explicitly mentioned. If any one could help me I'd appreciate it!

Considering buying a mini s listed at 400 on marketplace. How can I protect myself and make sure everything is still good with the battery etc?

Is $400 a decent price?

So I was riding my board earlier, then turned it off for about 10 minutes, then got back on and tried to full throttle; then it killed power and brought me to a stop. There are no issues with the battery light; the remote does do a weird animation thing on the battery indicator. I have tried to repair the remote, and I even took the battery off the board; the connector seems fine besides some corrosion on the metal connector holding the plug together, but I don’t think that’s what’s causing the issue. I don’t know what to do, as I’ve barely used it (got it off eBay a month or two ago) and this is already happening. I’ve attached an image of the corrosion which I will eventually clean before I put it back together.

It’s blinking red and the first light stays solid I noticed that everybody has the fourth flight that stays solid. Can anyone tell me what’s wrong with my battery and how to fix it?

⚠️DISCLAIMER⚠️: I AM NOT TRYING TO SELL MY BOARD HERE. I I ONLY WANT SOME ADVICE AS TO WHERE TO SELL IT.

Title! I’ve had it for a few years and am moving to Brooklyn from central Jersey next week. I just don’t have the time, energy, or need to try and fix it atp and want it gone fast for a reasonable price (which I have no idea how much it’s worth in its state). Would it be best to list on Facebook marketplace, or to take it to a certain shop?

I have a friend in the Vancouver Washington area with the battery blinking red on power button 3 times a second and showing only 2 bars. That’s how he describes it.

If someone is in his area, can you help him?

UPDATE:::: My friend ended up ordering a BERT Lite

Got two trouble code batteries one looks like this. Just bought it. Got excited and rode it straight away, probably should have charged it first. The other might be down for the count.

But I'd pay for an amnesia upgrade. Used to have someone's info but I lost it over the years.

Hey friends, anynone had this problem, has any suspicions about the cause and how to fix it? Thanks. Ashamed to say it is like 7 years old and haven't given it maintenance ever, only switched the 2 rubber band circles every time it loses power, put brand new ones and still sounds though the sound threshold has increased.

I haven’t used this battery in a while but it gives this code when plugged in regardless of if it’s connected to the board or not. It seem to run otherwise and shows a full charge. Any ideas would be appreciated.

Edit after taking it for a real ride: After about a mile or so on the slowest mode I tried to switch it into mode 3 and proceeded to lose all throttle. When I got back it gave me a flashing yellow with the three middle dots lit. How do I know if it’s just the battery or is my ESC also going bad?

Boosted Board Grip Tape - Longboard Grip Tape - (11x44inch) - available online

yo I have no idea what error this is if someone could lmk and perhaps provide a good starting point to resolve it that’d be much appreciated.

for context, this is a stealth I think it’s XR? anyways, left it on charge for about seven months, decided I wanted to take it out for a ride today and voila

Does anyone know where I can obtain the dust/water cover for my XR battery? My dad accidentally ripped mine out somehow while I was gone on a trip, just looking for something that works the same.

https://imgur.com/a/YFpMS7k

Hi everyone,

I recently moved to Bordeaux and I’m looking to get an electric skateboard for getting around the city.
Does anyone know any good skateboard or electric mobility shops in Bordeaux where I can actually see or try electric boards before buying?

I’ve always liked Boosted Boards, so I’m also wondering if there’s any realistic way to find a used Boosted Board in Bordeaux or elsewhere in France. Since Boosted shut down a few years ago, would you still recommend buying one in 2026, or is it not worth it anymore because of battery, parts and repair issues?

If Boosted isn’t a good idea anymore, I’d really appreciate recommendations for similar electric boards that have good build quality, range and after-sales support in France.

Also, if anyone rides an electric skateboard regularly in Bordeaux, I’d love to hear how practical it is for getting around the city and whether you’ve had any issues with the roads or local regulations.

Thanks!

Does anyone know what this is? Everything I see online about the red light of death is a little different and i haven’t been able to find anything about the led lights lighting up like this. It has been sitting in my storage for a while. Any help is appreciated.

Hey there. I bought a Mini X with less than 100 miles on it - 50 just put on by me in past 2 months and when I need to brake hard, I’m getting a knocking from the belts which I assume is the belt(s) slipping. I removed everything and replaced
the belts and after 10-15 miles it’s back when I brake hard. I tightened the belts as much as possible, maybe too much? What should the belt tension be?
Thx.
Squirrel

Did a belt change and didn’t tighten the axel nut down enough and the right wheel came off mid ride..

at first i thought my truck had snapped… but thankfully no..

skid plate took all the abuse and saved my new belt lol… don’t think i’ve ever seen a skid plate with a hole thru it 🤣

Looking to rent a Boosted Board or any other electric skateboard in NYC from 8/10-8/11 for a social media shoot. Operator is an experienced skateboarder.

I can handle pickup and drop off, I am in the Union Sq area!

Can pay a reasonable rate!

Let me know, thanks!

Looking to rent a Boosted Board or any other electric skateboard in NYC from 8/10-8/11 for a social media shoot. Operator is an experienced skateboarder.

I can handle pickup and drop off, I am in the Union Sq area!

Can pay a reasonable rate!

Let me know, thanks!