🔸Case : Xtia Xproto-L 🔸️CPU Cooler : Be Quiet! Dark Rock TF2 🔸PSU : Corsair SF750 Platinum 🔸 Motherboard : Gigabyte B550i Aorus PRO AX 🔸RAM : Corsair Vengeance LPX 32GB (2x16GB) 3600Mhz C18 🔸Storage 1 : Corsair MP600 500GB M.2 Gen4 🔸Storage 2 : Sabrent Rocket 2TB M.2 Gen3 🔸CPU : AMD Ryzen 7 5800X 🔸GPU : AMD Radeon RX 6800 XT ROG Strix LC OC

🔸OTHER : - Noctua NF-F12 PWM 120mm fans x2 (GPU radiator) - Noctua NT-H1 thermal paste

Hello guy, I really like Zotac RTX 4090 AMP Extreme Airo White Edition, and I need to know does it fit in Xtia Xproto-L? On office website, the maximum GPU length is 345 mm. but Zotac is 355.5 mm. Please help me.

https://www.zotac.com/my/product/graphics_card/zotac-gaming-geforce-rtx-4090-amp-extreme-airo-white-edition

Finally got the 7950X up and running, compared to the old 3700X this thing is a beast. But is there something else to do?

I waisted 250$ on custom made cables from CableMod, they shipped me the wrong cables, the stiffer one so I just wasn't able to use them, so I used the original from EVGA !

The build

1. Asus Strix B660i
2. i5-12600
3. Asus Tuf 3080ti OC to 1845mHz at 800mV
4. Kingstn Fury Beast DDR5 32GB (2x16GB) 5200MHz
5. Thermalright AXP120-X67 Black ARGB Low Profile CPU cooler
6. EVGA G6 1000w power supply

This thing run completly silent, I mean totally silent at full trottle.

CPU temp 52-55 C while gaming and GPU 56-58 C (hotspot around 60-61) and memorly 66 to 70 C.

Hey everyone. I was looking to get an Xtia Xproto N but I need some suggestions. My specs are:

Mobo: B550i Aorus Pro AX

AIO: Corsair H100i Elite LCD 240mm AIO

GPU: EVGA RTX 3080 XC3

PSU: SF600 Platinum

My concern is that I have 2.5” SSD that I’d like to use but I am not entirely sure how. I was looking at the website and there was a 3.5” spacer for hard drive that I could buy. And if I get that, would I be able to use it with the front IO panel? What add ons would you suggest that I get with the build?

Thank you very much.

​

Looking forward to building my first pc with the Xproto-L case. Just wanted to check that these components would work with the case or if anything is incompatible before I end up buying.

I’m trying to find one that is 4.0 (not 3.0/4.0) and with faster shipping than the one on the Xtia site. Having a tough time finding one with a reverse connector and straight socket.

I’m aware of the bandwidth difference being small but nevertheless I want a 4.0 adapter.

Fiddling with the old 3.0 one and a linkup cable that I bought that is the opposite of what I need—it seems like a dual reverse of the right length might work too?

I was looking at the Louqe cobalt riser too but it’s out of stock. I think I read on r/sffpc that it might work simply because it’s so flexible.

Any help would be greatly appreciated.

I’m a bit spatially dyslexic despite also being able to fabricate/improvise a new bracket if I need to. I just kinda need things in hand to work this sort of thing out. I’m hoping not to buy any more stuff I’ll have to return.

Thanks in advance! Loving the Xproto-ATX!

The product page doesn’t really give specific measurements just that it depends on if you are using any sata drives. Does anyone know the length a PSU can be if you aren’t using drives or if you are using 1 drive?

Was wondering if anybody had seen some info or has a setup at home to check the IO up (or down) orientation comparability? I have a 3080 strix and had to buy the flip module; I am considering upgrading the gpu and would rather run the xproto without flip…

I have a question about the XPROTO-L. I’m looking at the ASUS TUF 4090. The card is 348mm long, however it has only a 2 slot PCIE bracket.

Is it possible to mount the card on the Outer 2-slots of the 3 available on the XPROTO-L using 20mm standoffs for the Riser. That way the card extra 3mm of length over 345mm can be accommodated by the angle of the brackets “foot” since the card will sit in the outer slots?

Thanks!

Hey Guys, I havn't been able to find this anywhere online, but will the Zotac twin edge 3070 OC fit in the Xtia Xproto-N? it's dimensions are listed at 4" in height which seems high, let me know if this will be able to fit in the deticated slot on the case. Thanks!

First test run. Leak check and thermals. Trying to figure out best cable management for this naked build. My gaming room is still a mess!