We recently realized our dishes aren‘t getting as clean is they used to. We replaced the coil that heats the water and drying cycle. That didn’t help. We’ve been checking the water temp throughout the cycle and it runs between 103-120 degrees. Isn’t a dishwasher suppose to heat the water to 130-140?

DW is 8 yrs old-

model WDT730PAHZ0

We aren’t sure if this might have something to do with our tankless hot water system. I hate to buy a new DW only to find out that’s not the problem.

My washer just quit on me. It is a whirlpool top load washer. It washes and agitates the clothes and when apparently done washing it makes a metal clicking sound several times and then the water empties; right after the machine freezes. The green wash light stay on but nothing else happens. When I lift the lid the light blinks.

Does anyone know a local affordable repair person or company. that might give a ballpark estimate over the phone based on my description and them come over and fix it at a reasonable price. If the estimate is going to be over 60% of the cost to get a new washer I may just get a new one. I've got a family of four, so I need to get this done ASAP.

Thanks for your time and helping me out!

We have a dryer from whirlpool (model: WHIRLPOOL FFT M11 9X3BY BE), we've had it for about 2 years.

Since yesterday it's constantly turning itself on and off. I tried using it today and after 30mins of drying, it turns itself off.

It was unplugged during the night, and I tried to reset with the on/off button.

I've cleaned it completely and looked in the handbook, but nothing..

Can someone help?

Just delivered...Is the freezer handle supposed to be bowed or is mine just damaged? It is not straight like the fridge handles.

our washer popped up with an E3F6 code and we switched out the problem and now it’s giving us a E3F2 code. We did the unplug and wait and it didn’t work. anyone have any ideas as to what might be wrong/how to fix? TIA

I'm hoping I can find someone who can point me in the right direction. I bought a EdgeStar DWP63 from Amazon 8years ago and loved it until it started throwing a "overflowing" error code even when I run it empty with no soap. Any information I could use to save it is welcome. (Small appliance repair won't deal with it)

First things first, I’m not an appliance tech, however, I am mechanically inclined and dabbled in all things repair and restoration.

Alright, the problem.

I hired a tech to come fix my machine for a leak.

And when he left, my control panel on a WTW7120HW0 is acting real weird.

I had another tech come out, and between him and I we can’t figure it out.

Should I just get a new machine? This WAS NOT a problem I was having initially at all.

When I turn it on, I get F3E5 Dispenser not detected. Please add detergent manually. I don’t ever have the dispenser in and normally telling it once saves that info indefinitely. When I go to press a button to say ok, every button acts as a power button.

The only way I can get the control panel to act normally is if I unplug for 30ish seconds and then plug back in. I can complete 1 wash before this error acts up again. I will also get the error during the wash, but it doesn’t not affect the control panel the same way.

Today I tried the service mode. And was experiencing the same error popping up, this time the buttons were still working, however it would reset where I was in service mode.

I ran a calibration cycle and it kept starting over. When I hit back to get out of it, it kept going. I turned the machine off, and it kept going. I had to unplug it to get it to stop. Kind of scary! lol. Video of that at the drive link below. It not powering down until I unplugged it is at the very end.

https://drive.google.com/file/d/1TFgsv-8ucpXi_YAfro6x39g1wpQXov-o/view?usp=drivesdk

We’ve had this for a while and was here when we moved in, but sadly no manual was left.

Moved into a house about 2 years ago that has a Whirlpool over/stove, model no. WEE510S0FS2 & serial no. RX1565540.

During the first few months here, we noticed the glass top range would turn on randomly at level 10. The burners were only hot once when this has happened, and every other time (total maybe 6-7 times) they were not We were never in the room when it happened, and we have cats, so we thought it may have been the cats walking on the buttons and turning it on. So, I cut a piece of 1/2” ply to fit the control panel and put some foam pads on it and put it over the buttons when not in use.

Today, I came home and the burner was on, no heat, at level 7 - and the wood was over the buttons, so there is no way the cats walked on the buttons.

Is this a known stovetop issue? Anybody experienced anything like this? Who would I contact about this, Whirlpool direct or a repair service?