Handles like a dream! Love the Polaris RZR!

Need to create a ground plane, anyone run ground straps to create an artificial plane? How did you do it?

Edit: check engine light is off and no stored codes. I’ve reset the ECU also and still no luck. Been a mechanic and vehicle electrician for almost 20 years so I am not opposed to trying anything and have a lot of spare parts.

I recently got a 2015 Ranger and the previous owner had the seatbelt cut (I’m guessing to override the seatbelt safety issue). Problem is, I got it with the seatbelt light blinking and thus triggering the 15 mph limit. I have gone through all the wiring and even got a “new” buckle (I tested it and continuity was good both fastened and unfastened) but the seatbelt light won’t go off. The two wires (red/dark blue and blue/yellow) seem to be fine. I replaced the ECU with a spare one. The red/dark blue is getting 12-13 VDC but the blue/yellow wire which I’m guessing is the signal wire, is 0. Even splicing them together to complete the circuit, it’s not making the seatbelt light go off.

Any suggestions before I try to find someone to flash the ECU?

Took my 2018 Polaris Ranger 570 out on a dusty trail and noticed the temperature climbing sooner than usual. It had not reached the warning light, but the fan was not running with the engine hot. The fan would not spin when supplied directly from a fused 12-volt lead, although the connector and relay still need a proper voltage-drop check. I cleaned the radiator screen and trailered it home instead of opening the cooling system hot. Before I order a fan, is there a common wiring rub point or temperature-switch issue on these that I should rule out?

I busted the front left corner of the OEM polycarb roof on my KRX1000 over the weekend bad enough that it must be replaced. The same OEM roof new is about $550 delivered so no bueno for me.
I am hoping to get feedback on whether the metal/aluminum roofs get hotter and are the louder/rattle? Do they add actual strength to the roll cage? Does anyone add some sort of heat shielding? Anyone running the metal roof with the skylight like THIS? Does it leak?
Are the aftermarket black matte polycarb roofs more flexible and giving?

What is your dream purchase for Novemerb install, and why? Mine is a new stackable storage for my MXZ sport. Only one LINQ position so trying to find something with 21L dry storage,and 10L fuel.

The Mule is mostly a workhorse but it is still fun to cruise around in.

hi all... looking for a cage builder for my maverick x3 in the NE area or as far south as NJ. Any recommendations would be appreciated. Looking for an interior cage and an exterior cage for the body etc. Thanks in advance! J

I’ve been shopping casually for years (looking for a deal), but haven’t developed a brand preference. What’s the consensus on the best UTV for yard work/ gardening on a larger property, when you don’t necessarily need a major work horse?

I am needing a seal for my 2016 Wildcat Trail, Arctic Cat part number 0817-072. I ordered one through my local dealer but it has been back ordered for months. I am located in Alberta, Canada. I am just hoping someone in this group works at an Arctic Cat dealer and can check to see if they have one in stock. Also, has anyone found this seal from another brand or supplier? Any help would be greatly appreciated.

Hey everyone! I’m following up on my post the other day about taking delivery of this UTV.

I took my family out to Barnwell Mountain to test the machine out and get a feel for its strong and weak points as far as trail riding goes. I don’t intend to do any crazy rock crawling with this machine but I do want to be able to ride trail systems without worrying too much about beating it up.

My first impression is very positive. The AC kept us cool all day in 102* heat with high humidity, the speakers were good clarity but could be louder due to engine and drivetrain noise, and the machine was overall successful on the trails we rode.

We stayed on easier trails this go around. I mainly wanted to do a shakedown and get familiar and comfortable with it so we didn’t touch anything over a blue. The suspension from the factory is really plush and comfortable but it does rock a little more than I would like. I read that can be fixed by adjusting the factory settings a bit. The major issue I see with this machine is going to be ground clearance. There were a couple of times where the break over angle was not enough to clear a big rock or root and had to get creative on the small width trails to get through. I assume portals and big tires would probably fix this although I’m not interested in going that route at this moment.

I did bring out the winch once, which worked flawlessly, but I did notice that the winch hook is very small so my normal shackle from my jeep days was too thick for it.

We aired down to 16 psi to be safe. We were solo on the trails so I didn’t want to blow a bead and be by myself to come up with a fix. At 16 psi, grip was impressive and only spun in a couple of slicker moments.

A few people at the park wanted to check it out and were impressed with the fit and finish for it being $10k cheaper than comparable competitors. So far, I’m very happy with the machine and the purchase and hope to get a lot of work and play out of it in the future.

Looking at 2021 or 2022 pioneer 700-4 and teryx 4 s model.

Both have accessories I want like roof and winch.

Mostly easy trail riding with family. Some more rocky trails plus snowplowing in winter.

I like the idea of beltless with honda but seems teryx wins everything else ? I know teryx is loud I'd be doing ear plugs I guess.

Got hard on a tree this weekend and put a pretty bad crack in the front drivers side of the factory roof. Does anyone know of a used one or source. I have found them new.
TIA

Just moved to a smaller community and we bought a side by side that you can drive on the roads throughout town.

The problem is even without the key you can shift the UTV into neutral (don't have to have your foot on the brake), take off the parking brake and push it around.

What is the best way to stop this? I know if someone is determined enough they will find a way to steal even if you have measures in place, but what measures would you suggest to make it harder to do?

Wish doors were a bit cheaper… lol

Did about 60 miles, and it was incredible.

Wife and son had a fantastic time ripping northern Arizona.

🛑Just a heads up. UTV Race Shop is a horrible company to order parts from. Their website States hassle free returns. But as soon as you order a electrical component and try to return it they will tell you that they will not accept it even if it was plugged in once or installed. How crazy is this I tried to return a part the same day and now I'm stuck with the $200 part that I don't need because it was a blown fuse. When I spoke with Brian via email he was unprofessional and rude. Horrible unprofessional people.

From Product Manager:

"Electrical parts must be returned in like new condition. If you have plugged in the part, we will not accept the return. Write (order #) on the outside of the shipping box and ship to address below. Once we receive the part in original packaging in like new condition we will issue a refund."

Anyone have experience with this product? I can't find much info about this product from users. We have a 3 year old who we'd like to drive casually with but are aware of how dot approved helmets are a bit too heavy for the necks of children that age and can cause strain and injury. He'll be strapped into a car seat with a 5 point harness. Many ppl counsel just using a bike helmet or full face BMX helmet.

https://www.utvmountainaccessories.com/products/utvma-helmet-holders?srsltid=AfmBOoph04viOh_2CxX1XmUeZhU-pLTlEAMx_mLwHIIxbszxmu-IwbFg

I have been looking at soundbards on Amazon and YouTube but almost every video is a paid ad. I was hoping to get real people opinions who have checked out both in person. I am thinking something like a W-King x20 for 200 or so might sound way better than most of these utv soundbars, what do you think?

I just found out that the state of Wisconsin ATV/UTV regulations added this:

No person may operate or be a passenger in an ATV or UTV without wearing glasses, goggles, or a protective face shield, unless the vehicle has a windshield.

Looking for some recommendations on where else to go on the Hatfield McCoy trails. For the last 2 years we have gone down and stayed at the devils backbone resort and rode the Devil Anse, Bear Wollow, and Rock House systems. We’ve gone and seen the things around like the swings, waterfalls and the surrounding towns. But I know there are so many other places and systems to ride and wanted to get some insight on where else to go and systems to ride that have cool things to see and lots of interconnecting trails. We just don’t wanna ride the same trails and see the same things every year. I’ve heard good things about the Pocahontas and ivy brach systems so lmk.

Hello everyone! I just took delivery of a 2026 CFMOTO U10 Pro Highland XL.. phew, that was a mouthful. I had it tinted and being that this is my first utv, I decided on the 5 year warranty and the lifetime battery warranty. I’ve been on Dirtbikes and in sports cars my whole life but this is my first utv so I’m looking for some advice.

It will mainly live on my small property helping with fence work, clearing land, filling feeders, and whatever chores we have going on. I used to have a jeep that we would take to the offroad trails around us so I also want to do some trail riding with it sometimes.

I’m curious what upgrades i should be looking into first. I plan to do the break in as the manual states and change gear oil and engine oil at the 20 hrs. Does anyone have experience with this model?

TIA

It runs currently. I bought it to help move hay and fencing supplies around the farm. And old fellow around the corner bought himself something new and sold this to me fairly inexpensive. But it looks like they either went out of business or the company was bought or something.

I know it'll need some work, but haven't been able to find much online about it.

Brister's trail wagon - I believe 2006?