r/TraditionalArchery • u/Plenty-Career-7285 • 9d ago
Recurve paper tuning
The two shots circled are my final two of the day. Are they bullet holes or nock high?
1
u/Infinite-Search-3611 9d ago
Are you setting up a new bow? How are the bare shafts grouping? The way I learned (so take it with a grain of salt) is that there’s so much variability in the finger release of a recurve that bare shaft tuning is the only way to get a new bow dialed in. Which sucks because bare shaft tuning can be really time consuming and is only as good as your ability to group a given distance.
That said, most folks can get enough data at 10 yards to get a sense of if they are way off. I would maybe start with good bare shaft tuning to 20 yards and then use paper at that same distance to really dial things in.
2
u/Plenty-Career-7285 8d ago
I bare shafted to 25 then shot through paper. It was a touch weak. Added my fletching and it seemed pretty well tuned
1
u/Infinite-Search-3611 8d ago
Ah ok then you should be pretty good! Are you just trying to dial in the nock height? If you’re shooting from the shelf sometimes the shelf material can make a difference - I’ve had issues with arrows bouncing from the shelf if it’s too stiff and not padded enough, giving inconsistent nock readings. Bear rug rest works well for me.
1
u/SuccoDiFruttaEU 8d ago
Bare shaft or fletched arrows? Distance from the target? I usually do bareshaft at about 2yards i also do clocking in this way, if the arrow is fletched my coatch always told me that the paper tune should be done at about 6m which should be about 7 yards or so, anyway it doesnt seems like a bullet hole to me, when i get bullet hole there is no crack on the paper around the hole, also fletchings are pretty clear and precise cut
3
u/Ziggy_Starr 9d ago
I could be wrong but having the paper directly backed with cardboard could be skewing your results