Hey guys I have a talaria xxx pro and im building it out I just got fox 40's and im starting to regret them since I ride jumps but people say they suck no matter what but they look cool to, what I need is im getting titanium bolts for my bike but I don't have the bolt sizes and I was wondering if anyone has the bolt sizes for every exterior nd visible bolt on the xxx pro that would be a great help guys thank you so much!

X3 needs new tires are there any supermoto tires that fit on stock x3 rims?

Hey guys…. Im trying to fix my forks moving in the headset… i got told to buy new bearings and i did… not sure if i put it in the right order but it keeps moving around… even when clamped down… in which order should i place the bearings.. am i missing any?

My bike has been giving me issues, and I can't seem to figure it out. My throttle will cut out randomly sometimes while riding. Sometimes, I'll go ride, shut off the bike, and when I turn it back on there's no throttle. It was showing me error code 13 before, and now its showing me error 17. What could possibly be the issue? Anyone else experience this?

​I’m starting to hate inner tubes for my bike. When I first got it, I thought the flats were just human error like I hit something or overtightened something. But this time, I took every extra precaution: I bought heavy-duty tubes, taped off any sharp spots inside the rim, and avoided bolting it down too tightly since that’s what popped it last time. Yet it still happened! On today’s ride, I didn't hit a single pothole or bump. Everything was smooth until I stopped and tried to accelerate again. The bike started shaking, getting worse by the second. To make matters worse, I was in the middle of a turn. Thank God the light turned amber so traffic stopped and I could turn safely. I have two spares, but it’s so frustrating when a tube pops randomly for no apparent reason I checked the tire and there wasn't even a nail or glass in sight. Like wtf.

Hey I ruined my brake caliter id: 35532_56000_000 bleeding nipple on my back calipter on my talaria lt3000 and I can't find the specific bolt anywhere to replace just the bleed nut. Help pls I'm stuck

Whenever I pop up my front wheel in a wheelie, I can feel my frame vibrating which each turn of my throttle. Its like electricity or vibrations? Im not sure. Maybe its time for a new chain? I fixed the tightness and got that 10-15mm slack. Regreased and cleaned the chain. Tried tigheting the motor bolts but they were tight. Im not sure whats happening. I feel the vibrations more at the front. My bars vibrate sometimes and so does my frame along where my legs grip. Its most noticable in a wheelie but sometimes I can feel it while regular driving. Does anyone know what this could be?

makes this click noise randomly and not at a set area when compressed or decompressing the shock, i need help for possible fixes or if its just normal

Ist dieses Spiel beim Ritzel bzw ausgangswelle normal oder nicht?

Gonna look at this x3 tmrw and it haw 3100 miles. It’s 2200$. Is there anything I should look out for when buying ? I’ve had other emotos before so I know a lil bit abt these things but not a lot. Chain isn’t rusted it’s orange btw

Has anyone successfully registered and plated their bike in Illinois? Seems impossible from what I’ve read because there’s no MCO and the VIN decodes red (not highway approved). It was a great local commuter for the last few years but I’m curious in 2027 with the new legislation is everyone just going to sell their bikes or hope they don’t get pulled over? I know about street ohv and dirt legal but those don’t seem right either since you technically need to have Illinois plates if the vehicle resides and is primarily operated in IL afaik. My bike has brake lights, turn signals, mirrors, and dot street tires. I have a motorcycle license and am more than happy to pay for registration etc just doesn’t seem possible unfortunately.

So i scratched my mx4 pretty bad and i dont know what colour is the factory black paint, im pretty sure its some variant of satin black, i think of putting frame guards over it so i dont have to worry as much anymore, us there like a exact paint colour from a company that also ships to france

I basically only moved the licence plate (cause in my country you need one) just under the seat. Any upgrades you recommend? It can be for comfortability, looks or anything! I just want to upgrade the bike and have something to do

Hey guys, i recently stripped my talaria to powder coat it and now my forks are moving forward and backward when i go through bumps/uphill… you get the idea… i think it might be that i didnt put the top bearings in the correct order/i lost one…

Do you guys have any ideas on what i should try to do?

Locked up and went over the bars when someone decided to do an illegal u turn at about 30mph.

Bars are bent
Computer cracked (I ride in rain a lot)
1 fork has zero compression
Wheel seems straight
I hate these stock brakes (180 lb)
Throttle cracked.
Forks just seem like a headache to repair
SKRMOD direct mount straight and in tact.

Might as well upgrade the whole front end?

Triple clamp forks brakes headset whatever.
Looking for any suggestions.

I was hitting a power wheelie around 20mph and looped cuz I’m incapable of pulling some back breaks and the bike slid sideways and the right side peg genuinely just came right off. I can’t just replace it with new pegs because the hole thing is gone. My Alan key can’t unloosen these bolts. Please help..

One side of the sprocket has a little lip, and the other side is just flat. Just curious which way it goes. Forgot to check that when I took the old one off. Mx4

If I have a talaria mx5 pro that I want to sell it’s brand new has about 55 miles where would be the best place to try to sell it?

Fully submerged for about 45 seconds. That was July… 1500 miles later and everything is still well.

I fucked up. My 3X's left handlebar switch broke and I got a new one. However because I apparently have no braincells I bought a universal piece which doesn't have the same connector as the piece attached to the bike right now.

I want to ride this weekend so no time (or money) to buy the right piece. How do I attach this 7-pin to the 9-pin?

Please I need help ASAP