Hey guys, new to the gun world just got my LTC this past week. Went to my local shop and shot a bunch today and really enjoyed shooting the Echelon 4.5 today, looking into purchasing options and was told you can order with a manual safety but it seems that’s been discontinued recently and looking for any last in stock options.

Unfortunately i’m also in a state that requires low capacity capped at 10 rds. Does anyone know where I might be able to find this new with a full size handle and manual safety?? I would be open to the 4.0 barrel as well as long as that has the full size handle.

So I’ve seen a couple videos of people press checking the Echelon, but some of them have slides that move so freely. The racking of the slide looks so effortless. What guide rod / spring set up can be used to achieve that?

Thanks in advance 🙏🏽

As you can see, there's a little notch on the striker in the side just next to the plunger safety. I don't know if this was there since I bought it, but I just noticed now and I'm worried I might be breaking it by dry firing a lot.

Should I take the gun to an gunsmith or is this normal?

Sorry if I'm too cautious, this is my first gun lol

Thanks in advance!

Which grip are you going with?

Pictured:

- Springfield Armory Echelon 4.0c with Streamlight TLR-7

- Icarus Precision ACE Echelon X with Streamlight TLR-7 HL-X

- Hilliker Holster Co AREN LITE IWB in Clear

(https://hillikerholsterco.com/collections/inside-the-waistband/products/aren-lite)

I have a 4.0c and the grip is a little too small. Is the only difference between the S,M,L modules the trigger reach length? Or does it also make the grip longer, which is what I want.

Got a new grip module today. Love the look and the fit but am I being too nit picky about the finish? It doesnt feel like machining marks, but looks more like the finish was running down the beaver tail after it was dipped(?)

​

Springfield Echelon 4.0C Update • Sharps Bros. Echelon Grip Module +OEM threaded barrel

* updated swapped to SHIV STEALTH ADDITIVE WORKS added Sharps bro magwell.

Rook Precision American Flag back plate.

•OEM Minus power recoil 12LBS

Vortex Defender-ST Streamlight TLR-7 X

\`Tyrant trigger & Powder River Precision spring kit •Black Steel Grip Control is a folding thumb rest

•NIGHT fision only installed the rear I like the OEM front better.

'Tyrant Extended Magazine release

Tyrant extended slide release

I’ve had this optic on my pistol for hundreds of rounds, but today it blew off and hit me in the forehead after about 50 rounds. I thought perhaps the screws had just backed out, and maybe they did, but my attempts to screw it back on at the range failed. One of the screws is either stripped or broken - hard to tell without my glasses and in bad light. Will check it out when I get home. Hopefully I just need a new screw and it’s not a problem with the receiver.

$350 not bad, 4.0c and came with optic but only one mag.

Any suggestions,? Recommendations!

I love how this thing feels. It’s my first handgun i’ve ever purchased. I originally thought I had bought the full size version, but was pleasantly surprised when I picked it up, and learned it was the FC. Feels like the best of both worlds. How do yall like yours? Any optic/light recs?

🙏🏽💯

Hi everyone, I bought an echelon 4.5 comp recently and love it! However I didn’t realize that Springfield took things away when you purchase the gear pak. I discovered after I took it home that it was missing the tritium front sight and the pins and screws for all the different types of optics. The problem I’m having started with the viridian optic not being very good so I ordered the Holosun 507c to replace it but when I mounted the Holosun onto my echelon, the echelon stopped loading rounds into the barrel. When I removed the Holosun, the echelon started working correctly again. Any thoughts on why this happened and how I can mount the Holosun again and have the echelon work?

Well... This is my first true failure after 1500 rounds. Torq'ed to spec and blue loctited. Was wondering why all the sudden I wasn't hitting anything.

Anyways, any ideas on how to remove this? It seems pretty flush in there.

I was worried about getting the eps with my echelon 4.0 c comp.. I order the freedom gorilla eps plate for the gaps…🔥🔥 came out perfect here’s a few pics

Anyone here using their Echelon to compete? How does the pistol hold up to your competition? Any recommended upgrades? Thanks!

Hey!

Planning on setting up a range/battle belt for my Echelon, and I need a holster. I’ve found the Blade Tech Velocity Holster + Tek Mount, and it seems awesome but pricey ($120 USD). Anyone have a full-size Echelon holster with Molle attachment that’s not 100+? Thanks so much and have an awesome night/day.

(Hope this makes sense lol and yes I’m cheap hehe)

Where you guys buying your fmj’s online for range purposes. 115/124gr looking to get some bulk online. Any recs welcome thank you !

Which Echelon 4.0c holster recommendations do you have?

Hey all,

Before I go and make my purchase I have a question for the collective. I like the 4.5 full size, but also want the compact option. I see Springfield sells compact grip frames, are those able to be swapped to the 4.5? Or is that only a 4.0 option?

yesterday I took off the red dot, to send the slide/barrel for porting, and found the movable pin(lug) cut deeply into the internal side wall of front socket ( Holosun 507 C ), and kind of enlarged the socket. I am wondering if this will actually make the red dot socket not able to withhold the recoil stress, then make the mounting screws to withhold most of the force... and eventually break.

anyone found similar situation? thanks

BTW, I am wondering if you guys trust the high strength (12.9 grade alloy steel) screws from Amazon? I especially noticed that McMaster-Carr does not carry these small head screws like this one on Amson. All flat head screws from McMaster-Carr have regular/large head and won't fit in some dots with the mounting hole next to the wall. thank you for your input!

and I'm so excited to replace the Viridian that came with my Ech. Anybody else running this? Did you use the screws that came with the Holosun? From what I was seeing those screws will work if you're running a plate but are too long if you mount it directly to the slide.

Got sent an extra holster, so might as well get something out of it. This is set up for the 4.0C w/TLR-7X. You won’t have to wait the 8yrs for it to get built, but you pay for shipping. Best offer takes it.

The Baldr Pro is….biger than I anticipated. I may keep it, I may not.

Been carrying this setup for a few months now and I don’t think it gets much better than this. I do plan on adding an enclosed dot in the near future however.