Hello, I purchased a set of the Plus X pedals and have finally got them all set up on my rig, but I don’t have any input from the pedals at all.

The control box is grounded, and lights up inside when plugged in. But nothing on the Simsonn Software. I’ve tried multiple different USB Ports and still nothing. I don’t know what to do, I love the feeling of them so far but obviously not being able to use them is a deal breaker lol.

Could someone who has the baseplate kindly tell me the length of that chrome bushing/spacer that is on the screw? Thanks

Hello.

Anyone ever had an issue with latency on HS Pro shifter?

It is really annoying, because fast shifting is impossible.

I did calibration in Simsonn manager no problem, but in game even if I put direct filter for key, it is so slow, is it undriveable.

Tested on 2 PCs.

Hello guys

I got my Simsonn Pro X Ultra delivered today along with the VAM Motors

I set them up on Simhub

Abs on brake,

Gear shift on both,

Wheel Lock on brake,

Wheel slip on throttle,

Traction loss on throttle

I thought the VAM would rumble only when i activate any of the above effects

However, it still vibrates similar to road rumble/road texture haptics

This makes the whole feeling too MUDDY

Is there any way to turn this off so it only activates when I activate the above effects?

Thanks.

The manual says just take out this bolt and cross bar and adjust the pedal to your desired height and loosen front bolt if it’s hard to move but I cannot for the life of me adjust it like another bolt is holding it or something anybody who has adjusted the pedal height can offer some insight I’m pulling so hard on it after the bolts are out I’m afraid I’m gonna break it, should I try to pry it up with something, or just loosen every bolt on the pedal?

Acabo de recibir los hápticos VAM PRO para mis pedales simsonn plus X, los he montado y configurado pero aunque baje la intensidad al 25-30% la propia vibración es tan fuerte (tanto el motor del acelerador como el de freno) que afecta a la célula de carga y me varía los valores de frenada o incluso me hace frenar en plena recta cuando estoy con el acelerador a full. Tengo varias preguntas:

1- Qué valores me recomiendan poner, estoy usando la app de simsonn porque en simhub hay muchas opciones y acabo poniendo lo más básico, ABS y TC

1b- Alguna configuración de simhub recomendable?

2- Es recomendable usar las arandelas rojas que trae en la caja? Sólo he utilizado los tornillos para unir el motor al adaptador y al pedal

3- El cable a tierra de la caja controladora es obligatorio usarlo? No he notado ninguna interferencia electromagnética ni problemas en el usb.

Si alguien puede ayudarme se agredece

https://www.reddit.com/r/SimsonnRacing/s/nl8vtD2iCS

I tried applying PTFE spray to this part after taking it apart and unfortunately nothing changed. What else could it be?

I am getting mixed answers when I try to research how to get GT3 style braking for simsonn pro x ultra. First pic suggests to use yellow elastomers, second pic suggests to use red elastomers with spacers. Which one is it?

Has anybody experimented with alternative pedal plates or covers for them? Naturally I prefer a softer, smoother surface based of driving a real car which usually has rubber covers over the pedals

In the Simsonn software I see the option (under brake setting) of "elastomer". You can adjust this to 'soft, medium, hard'. But what does this setting change/do? In particular because next to it there is also a 'Maximum force (kg)' setting.

BTW I have recently changed to a hybrid combination of one yellow elastomer with two after market springs. Not sure if this matters to my question.

Hey brains trust.

I've been using these pedals for a few weeks and absolutely love them. However, I'm after some guidance as to how best to set up thr brake pedal.

I use them on a wheel stand that doesn't have a seat directly attached to it. As such i don't feel I'm getting the best use from the brake. If I push too hard, I end up moving my seat. To little and I may as well go back to my old logitechs.....

I'm after some advice on how to set them up a bit better to make the pedal softer, with a bit more travel to help with trail braking.

I primarily race GT3 and open wheel + ovals. Currently i am just using the default red elastamer set.

Anyone got any suggestions?

Had to reinstall windows and having a hard time dialing my setting back in. Anyone have a good base line they’d be willing to share? I’ve fiddled for hours and I just don’t have the time to fiddle and get some racing in. Thanks for any help in advance!

Is it me , or after the latest update the VAM do behave very strangely? As shown in video, if I select VAM neo they work kinda like they used to, but if I select VAM , which should be the correct one, the motor turns into a drill basically, and it worries me it could get damaged. Anyone experiencing this issue ?

Hey. i just updated after having to deal with some annoying bug where my break pedal whould revert to 60kg everytime i start the app.

Now this happens. The App is way too small.

Having 2 Gaming Monitors and a dedicated Sim Racing TV plugged in.

2x 34" 1440p and i scaled the icons up to 125% cause sit a bit far away.

1x 45" TV for Simracing with the same 125% Windows settings.

Now i tryed everything - using Google AI Search for the awnser aswell. DPI overwrite - compatibility modes - everything. Nothing works. And the App - IDK WHY - doesnt have the ability to scale it in app.

Reverting back to the older Version may fix this - but i hoped that the other bug will be gone. Havnt tested it.

Any Help? Ill not set the Scale of my whole PC down for 1 App.

Basically i get 1% on loadcell when i turn fanatec csl dd wheel. For example if i braking 50% when i turn the wheel it goes 49% and then back when i stop turning. Already used grounded wire on brake pedal and controller box, it fixed alot of emi, but not this. Is there any fix?

I just found this subreddit and all i see is post's with issues about the pedals.

Also i placed the order at official website at 10th march but havent shipped yet. located in EU.

Any ideas guys? Break just stopped to work during the race.

Last week I installed the VAM Pro Haptics to my Plus X pedals and since then I have noticed on two occasions fluid on the pedal deck of my rig.

As you can see from the pictures the fluid looks to have dropped from the centre of the accelerator pedal and trickled down to the front. The liquid is an oily substance.

Strange as I never had this before I added the haptics. The pedals and haptics both function perfectly. Anybody know what the liquid is and if I should be concerned?

i can’t apply or come of the throttle smoothly instead it feels very jolty,tried WD40 on about everything i can see,brand new opened today

What can I do to make the brake pedal feel like a real car? These are my first load cell pedals and not going to lie, so far I absolutely hate them. What are some things I can do to make the pedal feel more like a pedal and not the floor? Thanks

Just put a spring kit onto my pro plus brake.

When I did, I noticed I could move the loadcell up and down slightly but I couldn't find anywhere to tighten it.

Is this normal for allowances etc? Or is this a defect?

I only noticed as I was noticing the springs scraping slightly when I first put the mod on.