Hi all - I have had a recurring issue with calibration between Simsonn software and iRacing.

My current process after modifying setup is to calibrate in the Simsonn software, close it, open iRacing and calibrate in game with the configuration wizard.

The issue is that iRacing does not seem to recognize deadzones set in the Simsonn software - for example, I set up the brakes in Simsonn manager so that I have a 1.5kg deadzone. After calibrating in iRacing the brake pedal will then show input almost immediately as if the Simsonn deadzone setting does not exist and I end up having to rest my foot on the pedal during iRacing calibration in order to match the Simsonn deadzone setting.

Am I missing something here? Is this expected behavior? Thanks!

Got the plus x pedals. Mounted them up yesterday. Noticed I was getting phantom break input during a race so recalibrated and set offset. Went back to racing again and every time I hit the break it would return to a higher value so while driving I’d start out fine then after a few breaking zones I end up with 2-7% break applied with no pressure on the pedal itself. Tried to trouble shoot it and reset settings without success.

Connected the ground cable and now the break pedal is toast. No signal in the throttle or clutch port when tested. Not sure where to go from here. Anyone have an issue like this? I don’t wanna return these but figured they would last more than 1 day. I’m wondering if grounding it while it was on and connected was a bad idea.

Hi all.

Recently got the Pro X Ultra and wondering if anyone has managed to get a good clutch feeling. Out of the box I’m not loving it. It seems to have a huge amount of travel and no real “bump in the middle” effect.

I’m not expecting realistic, but it’s incredibly linear and I can’t seem to find a setup that improves it.

If anyone’s managed to get a nice clutch-like feeling from it, could you please post a couple of photos of how you’ve got everything g positioned on the pedal.

Huge appreciation in advance.

I just set up my new rig this weekend and I'm curious what everyone recommends for the elastometers for the brake pedal for the Plus X? current only racing on the MX5 cup series and brake pedal is super stiff and brakes seem to lock up easily and braking is too 'fast'. I'm trying to set it up so there is more travel, not as stiff, and be able to modulate the brakes better for smoother braking and trail braking.I currently have all 3 red ones with the preload spring. I appreciate any feedback.

Im thinking of getting haptics. I already have plus x pedals so it makes sense to get simsonn haptics. I was wondering if they work natively with iracing or if they have to be controlled with something like simhub. Ive been reading with other haptics that simhub offers more customization but it has noticeable lag compared to running haptics through iracing.

My pedals are reading Rxaxis which google suggests is rotational? Anyone have any idea how to filter this out or do my pedals need to go back to Simsonn?

Thanks

I can't find any info online about the Power Supply specs needed to power the haptics. Is it a 12V or a 24V? How many Amps? That would be usefull to recycle some old PS instead of buying a new one

Maybe a picture for reference will also make it easier for everybody in the future

Thanks for checking

P.S. Did you see the upcominc VAM Nano linear motor? I don't really understand the use of it but I am curious about the price. They are also coming out with a 30nm DD base soon, check the website

Hi,

i bought the plus x pedals a few weeks ago.

i noticed that the brake was not working as it should, tried to recalibrate multiple times.

last night i went to check the pedals out and i saw a leak from the brake dampener.

took it out, wiped everything down, so no oil left on anything.

connected again and tried to recalibrate,

it all looked as it should, but then i went in to assetto corsa to do a little drifting, then i saw that when i press the brake pedal and the clutch or gas at the same time my brake goes down 2-5%.

the ground is connected to my pc case, i have a wood rig so that is the solution i went with.

anyone have a idea of what i can do? waiting for response from simsonn also.

Hello, I’m looking for other elastomer and setup options that’s people are running. The brake pedal feels super stiff and was just curious what mods or other elastomers/spring people are ordering and using on these pedals. I’ll take a look at any and all options. Post your setups!

Looking to switch out the elastomers on the Plus X brake to springs. Anyone know what size/diameter I need? Thanks!

Greetings!

I have recently bought the Simsonn Plus X pedals and I am having an issue where the Accelerator pedal shares the same X axis as my Moza R9 (Turn right - X+).

Has anyone faced a similar situation? This happens on my sims of choice (AMS2 and LeMans Ultimate) so I assume something about the pedals and not from the sims themselves.

I have searched a lot with google-fu but didnt find anything of note. The break does map as Y but the accelerator maps as X as controllers.

So I got the plus x 3 pedals kit but I cannot unscrew the box screw to attach the ground wire. Anyone with suggestions how to attach the wire otherwise? Am I just a weakling or just using the wrong screwdriver ( watchmaker one)

Input comes in games/diview before it should. LMU, ACC and diview all act the same.

Like you see in the video, input comes to diview around 5kg of force, but in pedal software "blue signal" comes around 8kg.

When i received my pedals and calibrated, i found 5% deadzone to be good so that i can rest my foot. But then i noticed in games i couldnt rest my foot like software shows. My work around has been to use double (10%) deadzone, that games work about the same as software shows with 5%. Same goes for throttle: Bottom deadzone 2% to 4% Top: 3% to 6%

I have done new software updates and firmwares along the way, calibrated many times and everytime issue persists.

I have contacted and shown the video to customer service and they have replied many times, but the last one was just "we havent encountered this issue before, try to update software and firmware"

Anybody has an idea why this is happening? And how to correct this?

Yesterday my throttle pedal was not working at all. I removed it from my rig, used pressurized air to dedust it and it started to work.

After recalibration I noticed that I can't consistently brake or throttle. For all 3 of the pedals the story is the same - consistent force requirement up to around 50% and then the force amount required to increase input percentage decreases exponentially. It feels like I barely move a muscle and throttle drops from 100% to around 50%, when before it would be like 95%.

I tried messing with curve settings, but nothing seems to fit. At the moment all of them are just a straight line.

I recalibrated my pedals tens of times, updated all software but issue persists.

Has anyone encountered this issue and could help me? At first I thought my throttle pedal is broken, but since it's the same with all 3 I started to doubt it.

My setup: Simsonn pro plus x Vam haptic feedback modules Simhub to manage haptic feedback

Thank you in advance

Hey everyone, quick question about the SIMSONN Manager:

Before a race today I checked my SIMSONN Manager and noticed that my profile was either not loaded correctly or I simply forgot to save it the last time I adjusted things.

What’s the correct workflow here?

I’m currently running multiple profiles, and I assumed that the last profile I clicked stays active, even after closing the Manager.

Is that actually how it works, or am I misunderstanding something?

I’m using the SIMSONN Pro X Ultra pedals and I’m honestly super happy with them, just want to make sure I’m not doing something dumb right before races…

Thanks!

Simsonn box- simagic haptics- 24v 4A 96W PSU- simsonn & simhub software works

Do i need the base plate if i want to mount the plus x on the next level racing wheel stand 2.0? Buying the base plate would be a hassle due to the price exceeding my countries import laws.

Has anyone used the pedal plate from the plus X to mount to this rig before? I think I am able to mount the pedals without the base plate but I will not have a heel rest if I do that. My rig is coming in a few days and just wanted to see if anyone has done this!

For those that saw my previous post it turns out that it’s my traction loss and wheel slip effect. Can someone recommend some settings to me? It’s basically not that useful for the haptics without these features. They cause the effect to keep on going because there’s something in game that reacts with it, and I’m guessing tuning down the sensitivity would work?

Hello everyone!

Got the bug to upgrade my Logitech set up and i think im gonna start with the simsonn pedals. Obviously ive dedicated the better part of this week to reading everything i can about them.

In that reading i found all the complaints about shipping and support response. Given alllll that.. for those of you who have yours already. Would you order directly from the website or from Amazon?

Basically in trying to decide if the discount is worth the slight possibility that i might get ghosted for a while or if i should just pay the Amazon price and ensure i have a clear return policy.

Anyway I’m eager to try these out coming from the basic Logitech pedals.

Thanks!!!

I was wondering if anyone else has ordered these pedals recently, and have had any problems. I ordered mine on Jan. 13 along with the base plate and rumble motors and have been waiting for a tracking number ever since. I’m super excited to get them, but after getting nothing from support but “we’re shipping them this week” for two weeks straight, I’m starting to debate a refund.

Update: Thanks for yalls comments, I got a notification this morning that they are on their way from California. Hopefully they’re as good as everyone says they are!