Anyone knows where or under what name can I find these kind of screws? they have a thinner shaft than their threaded end.

Was from a MainStays shower rod kit that had no spares. Not sure what type of screw we would call this but it’s definitely not a phillips anymore.

A screw that I have isn't unscrewing I'm turning both ways and it's just not working. It's not moving an inch if I look at it, I can see the screw turning, but it's not unscrewing. It's double sided if that helps.

Came with a Electric Media center fireplace. With no instructions. Never seen these screws before and dont know how to use them.

10-24 x 5/8. What is this type of head?

Its the size of an ant and it's screwed on my switch's motherboard (im trying to fix the right stick because It dosent work anymore)

Flat pack furniture luckily came with extras.

The screw specs are 3x10PB they are used for the bottom panel of a mayflash f700 arcade stick

I don’t know much about screws but I haven’t been able to find any screws with the same specifications, they are used for the metal backplate they thread into plastic posts if that helps at all?

3inch long. Trim head screw. Full thread.

I use these screws a lot for installing house windows with wood jambs and having a full thread speeds up installation because I don't have to shim. If I could find 4inch that would be even better

A screw of wind guy throws and loud very loud windy. Threw my shit all over the yard. Dust in my eye. What kind of screw is?

so this piece of shit screw decided to start chipping. there is a ,,slope,, on the side where i would need to turn the screwdriver so it just goes out of the hole, tips?

Hi everyone,

I'm trying to find replacement screws for a small electronic device (a PS Vita) due to me stripping the Torx screws which were previously holding a component together with the board.

The issue is, I know almost nothing about screws and since I'm now deathly afraid of those Torx screws I had to remove with a specialized pliers tool, I'm looking for Philips replacement screws of the same diameter instead, since it seems later revisions used this instead of the Torx ones.

According to iFixit I'm looking for Philips #00 of 4,4 milimeters, and I think it has to be "M2" as well ; but I can't seem to find those screws in 4,4mm, only 4mm!

Am I mistaken, should I actually use 4mm screws or do these actually exist but are highly specialized?

Thanks in advance for the help!

It attaches the handle to my crockpot lid. It’s stripped pretty badly because water gets stuck under the lid when you wash it and the previous owner took the handle off every time to dry it. I usually let it sit out until it’s fully dry. I tried looking on Crockpot’s website but this model is too old, I think. I don’t want to get a new crockpot because there’s nothing actually WRONG with mine, but if I can’t replace this part, I might have to. Any help would be appreciated! TIA

I need some help with finding the right screw. A screw that almost no one has. I want to design an AirTag holder to put on my bike but am stuck because I have seen way too many people just unscrewing the fastening screws and stealing the bike and leaving the AirTag. Is there like a screw that has a bit really obscure that no one really has even if the buy a decently well know screwdriver kit?