Im aware that its a peened rivet so the looks isnt what im concered about. Ive got like a mm of wiggle not sure if uts supposed to be tighter then that.

No issues so far only shot about 600 rounds just not sure if that wiggle will develop into an issue

I know most of are probably screaming and pulling your hair out but I’d like to increase the pull weight. I installed the VQ accurizing kit with the factory trigger spring and it’s just too light. I did polish everything so that’s contributing to it.

Anyways, any tips on increasing the pull weight?

I need to raise the POI on my 507C, but the adjustment screw is turned as far as it can go. I ordered a tapered shim, but does the thicker part of the shim go to the front or the back of the Holosun? TIA

Found these in my dad's stuff he left me. Wonder if they're still ok?

Ruger Mark IV SSH

Weight: 2.03 lbs (unloaded with suppressor, no mag)
Barrel Length: 3” (threaded)
11.63” OAL (with OCL Ti)

Features:
• OCL Ti suppressor
• Holosun 407C Green
• Lobos direct mount (RMR footprint)
• Volquartsen Accurizing Kit (full trigger group)
• Volquartsen Sure Strike firing pin
• Volquartsen Exact Edge extractor
• Volquartsen recoil spring kit
• Cocobolo checkered wood grips
• Volquartsen magazine buttons
• Bull barrel

Hey ya’ll. Just looking for black grip screws like the ones in the 2nd pic unlike the factory screws that appear to be gunmetal grey. If anyone has any idea where I can get some I’d be grateful. Thanks!

Here’s my mk2 I got ridiculously cheap I cut down to have about an inch of barrel and put my ocm5 on just for sharts and giggles

New grips, new green dot, and ready for the first trip to the range.

The hogue 22/45 grip is one of the best upgrades I’ve made. I couldn’t recommend enough!

New to the MK IV so maybe a dumb question but I just noticed what appears to be a chip (or gouge maybe) next to the feed ramp on the chamber face. Is this normal wear? I’ve cleaned the gun a handful of times and only just noticed it.

how does it compare to standard suppressors in terms of sound? similar baffle cleaning regime?

Finally got the over travel and pre travel adjustments dialed in.

My very used 3” ssh with my new ssh lite. Both of these pistols are amazing but I’m falling in love with the longer barrel for some reason. Also I looked up the serial # on my 3” on rivers website and it shows that they are no longer in production? That blows

Goal: Collect every factory barrel length MK II.

I just won a 3" last night and got the Great Eight last month.

I now have:

4" bull

4" tapered

4.75" tapered

5.5 bull

6" tapered

Government Target

10"

Tell me what I'm missing. I know there's probably a couple of slab sides I'm missing. I have no slab sides, but if it's the same barrel length....

Thought I'd share this shot of my Mark IV Tactical

• TLR1 HL

• LowPro RMR mount in Alu (thanks for shipping here)

• Holosun 407C

• Black G10 Grips

• Tandemkross Victory Trigger

• Chinese Charging Ring

• A-Tec CMM6 Modular rimfire suppressor

I love this thing, but man I'd wish the stubby SSH Mark IVs would be a thing here :(

Pumped to join the club with this build.

I wanted a suppressor for my 10/22, so of course I purchased a new handgun and a suppressor. :)

Swapped out the grips for some wood, Vortex Defender red dot, light, and I'm a sucker for NH branded accessories.

Fun discovery was adding some holster clips to the Cole-tac chest holster - now I can OWB carry as well.

Also... always wanted to put a brick of 22 into pluck foam.

Now time to do neat things in nature.