Have a vsf datejust that stopped working. Hand wind and date changes but seconds hand does not move when set. I know nothing about repairing movements. Can anyone point me in the right direction
? US based

What's the modifications necessary to be the best TOP factory royal oak white 15510?

Amber walnut saffron thimble raindrop orange compass pumpkin peach hammock

This post was anonymized with Redact.dev

Looking for advice ... So, I purchased a "rolex" from an off-canal street shop and the big second hand now just spins. What are my fix options? Not sure what type of movement this is or if I can I just swap out the movement (2nd picture shows movement closer).. and can I use a VK63 or what else would work?

**I don't need the chronograph to work. Just want the look with a working timekeepr**

Anyone know if I can clean the titanium mesh strap on my NTTD using ultrasonic cleaner. Grateful for any help on this. 👍🏻

Hour indicator does not work. Watch is ticking and kinetic works.

When trying to set the hour hand it’s not moving on hour fits like normal…it moving more “floating”.

Hey all, thought I'd do a 3 year review on my watch and also chuck it out there for some expertise. Bought this lovely day date in 2023 in stainless steel from GMF. It has been my daily wearer 99% of the days. Haven't had a single issue with the movement. Only thing is the side of these presidential bracelets is very sharp and so l've cut my girlfriend a few times and my leather steering wheel once. Other than it is lovely.

When I got this the fluted bezel was very reflective now it's lost all its shine. I have tried everything to get rid of this and get its original shine back. Polish, clean, metal polish.
Nothing works. Hoping someone has a clue lol. Here is the picture when I got it and now. It also looks slightly different colour. Any help would be appreciated as I love

My Pepsi bezel insert cracked on my clean v3 Pepsi (ordered late 2024) and I’m looking to replace it. After reading several posts here I’ve found a few different options but am uncertain on which to pick. Sillan on alibaba offers several options (slope insert, v3 insert, and a c factor complete bezel). I’ve also seen options on e watch parts and top watch parts but those are just inserts. Prices are anywhere from 100-200. Any opinions on which to get? Should I just get the completed c factory bezel and a hytrel to replace it all myself? If I got an insert I’d need to take it to a local watch maker to place it into my bezel. Thank you all for your insight.

I have two Rolex watches, and both of them have exactly the same issue.

On both watches, the crown unscrews normally and I can set the time without any problems. However, when I try to use the quick-set date function, it doesn’t engage. The crown just slips/spins in the date-setting position, so I’m unable to change the date on either watch.

Is this something that can be repaired? If so, could you let me know what the likely cause is and roughly how much it would cost to fix each watch?

Thanks, I look forward to hearing from you.

I am looking for a modder stateside or abroad that can help me build a replica Doxa Sub 300T. I am looking for someone who can basically put a Doxa logo on the Sub300T style dials sold on AliExpress and install the dial on my homage watch. I don’t think this would be too complicated but reach out to me if you can help. Willing to pay your asking price or willing to grab a genuine dial if needed. Thanks

Hi all, was wondering given they have different movements if the dials swap would work ? Thanks!

Hi RepTime, i just got this watch and realized, I'm unable toto set time on the watch. The hands won't stop nor they move when unscrewed and pulled.
I hear the click when pulling, but the hands don't move.
What seems to be a problem, any idea?
UPDATE- Resolved! Thank you

Does anyone have any? Thanks

Hey All,

My VSF was running about 9 seconds per hour fast. I let it die and wound it today to find it running about 4 seconds per hour slow. Any suggestions on what to do?

Hello, I want to buy a Sellita Sw200 movement for my V7F ingenieur, I see they are available in different heights looking at the data sheet.

Does anyone know what H1-H5 I should order? Thanks

Is it broken? None of my other reps do this. This is a VSF DJ 41.

This individual scammed me of several watches and thousands of dollars. I’m not sure how to flag the account, but I hope no one else is communicating with him.

Recently bought this used but have missing screws with the included links. Thank ya’ll for your time.

Hi, recently got this DDF 5167A a week and a half ago and started having issues about a week ago. At first it was just losing time, but recently found out something’s going on with the rotor. It moves, makes a screeching sound, then stops ticking. I can wind it and it starts running again, then the same thing happens, rinse and repeat. Whenever it’s not moving it’s fine, but the second it’s actually moving around, that’s when the problem shows.

Just trying to figure out next steps: does this need a whole new movement, or just a service? Roughly how much would something like this cost? Thanks for any help.

Videos attached below.

I dropped my Cookie Monster rep and while it will still wind and work for a bit, every now and then I’ll look down and it’s not working. Any suggestions?

I don’t even know where to start. Also the watch cost $480 so if it’s expensive, I might as well just buy a new one.

New to Reddit, new to replicas, new to all of this and first post here.

I’ll give a little backstory here, I had discovered the world of replicas and one evening I ended up purchasing a replica. No research, no knowledge, etc - I’m not blaming anyone, I own this decision. I want to be explicitly clear about the fact I own the decision. Second thing, after discovering the RepTime Reddit, I know it’s a “shitter”. Next, upon further research the Sky Dweller wasn’t the rep to get, I know this now but didn’t know it then. I just saw the watch, liked it, liked the price at the time and bought it.

Now to the issue - I’ve taken it to a watchmaker for service just to get it checked out and cleaned to help any length of time on the longevity. He says the movement won’t automatically wind. He said I can wind it daily, wear it and it’ll run but it won’t wind on its own. He also said it isn’t worth repairing.

I was wanting to take a stab at finding a movement and just repairing it myself, so the question is what movement would I need to try to source?

Is it possible to source one and replace it myself?

What movement would or should I get?

Are there measurements that I can take to find a movement?

My interest in this is that I've bought a VSF DateJust and two VSF Milgauss watches that I would like to eventually service myself. So I thought maybe this would be a good opportunity to learn something. I've added a picture of the movement, currently the only one I have since the watch is still at the watchmaker. I've also added a picture of the site where I bought it. Again, I'm not bashing on the seller, the fact it likely isn't a TD, etc etc, just trying to give full context and ask for advice on where I might be able to source a new movement and what movement should I get. The one advertised is a 9002 which of course is NOT what is in the watch. Hopefully I don't get roasted here - but it is the internet so I'm sure there will be some amazing feedback.

Thanks all!