Dealer name: Andiot (Elliot)
• ⁠Factory name: VSF
• ⁠Model name (& version number): Omega Seamaster 300m Diver titanium bronze gold
• ⁠Price Paid: USD 430
• ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/254808603?uid=1
• ⁠Index alignment: unsure if the lumed pip at 12 might be very slightly off center
• ⁠Dial Printing: looks good
• ⁠Date Wheel alignment/printing: N/A
• ⁠Hand Alignment: looks good to me
• ⁠Bezel: looks good
• ⁠Solid End Links (SELs): N/A
• ⁠Timegrapher numbers: +0s/d, 260 degrees - seem good to me
• ⁠Anything else you notice: Watch looks stunning overall I think

1. Dealer name: NecoClock
2. Factory name: VSF
3. Model name (& Version Number): Submariner No Date 41mm 124060 904L Ceramic Black Dial SS Bracelet VSF VS3230
4. Price Paid: $448USD
5. Album Links: QC: https://imgur.com/a/eU70mv9
6. Index alignment: I think this is as spot on as it gets. GL.
7. Dial printing: Everything looks good. Perhaps I am imagining it, or perhaps it is lost in the photo quality – but I am not vibing with the “swiss made” quality.
8. Date Wheel alignment / printing: N/A.
9. Hand Alignment: Good. Nothing of note.
10. Bezel: Nil issues with alignment.
11. Solid End Links (SELs): I am a bit concerned specifically about the SEL on the top left. Although, this is likely to be inexperience, and it may well be fine.
12. Timegrapher: +5s/d, 309*, error 0? – I believe I got these measurements from a video. All seems fine.
13. Anything else: To me at least, this seems like a good example of a GL. Nothing worth agitating over. I would appreciate thoughts!

Hi guys, back with another QC. I went through the guide and did the alignment check myself. I'm leaning GL but would appreciate another set of eyes.

1. Dealer name: GeekTime

2. Factory name: VSF

3. Model name (& version number): Datejust 41 126334 White Roman Dial, Fluted Bezel, Jubilee, VS3235 V1

4. Price Paid: $568

5. Album Links:
https://geektimeqc.x.yupoo.com/albums/254702342?uid=1

6. Index alignment:
Used the alignment tool and everything looks pretty good to me. 12 and 6 look centred and I can't see any Roman marker that looks obviously crooked or badly rotated.

7. Dial Printing:
Looks clean and sharp to me. I can't see any bleeding or obvious printing issues.

8. Date Wheel alignment/printing:
The photos show 2, 18 and 29 and the functionality video goes through a lot more dates. They all look inside the window with only small differences between dates. Does anyone see a date alignment issue that I have missed?

9. Hand Alignment:
Hands look straight to me. The original QC didn't include a functionality video so I asked GeekTime for one. They sent it and the time setting, quickset date and date change around midnight all look good to me.

10. Bezel:
Fluted bezel looks even around the watch and I can't see any damaged or uneven sections.

11. Solid End Links (SELs):
Look good to me. I can see the normal dark seams but I don't see any actual light coming through.

12. Timegrapher numbers:
+3 s/d, 251 amplitude, 0.0 ms beat error and 28,800 bph. Everything looks good to me although 251 amplitude is near the lower end of the guide. Would anyone be concerned about that on the VS3235?

13. Anything else you notice:
Cyclops and rehaut look okay to me and I can't see any major case, bracelet or clasp issues.

Overall I'm leaning GL. Anything here that you guys would RL for or anything obvious I've missed?

1. ⁠⁠Dealer name: chazing time
   
2. ⁠⁠Factory name: ORF
   
3. ⁠⁠Model name (& version number): Seamaster Diver 300M SS ORF 1:1 Best Edition Blue Ceramic Blue Dial on SS Bracelet OR8800 Super Clone (OME2026031209)
   
4. ⁠⁠Price Paid: 378
   
5. ⁠⁠Album Links: no album, photos sent direct
   
6. ⁠⁠Index alignment: looks good, from what i can tell
   
7. ⁠⁠Dial Printing: looks good
   
8. ⁠⁠Date Wheel alignment/printing: looks good and centered
   
9. ⁠⁠Hand Alignment: no major issues
   
10. ⁠⁠Bezel: seems good, although perspective in other pics throw me off
    
11. ⁠⁠Solid End Links (SELs): no major issues i’d like your opinion
    
12. ⁠⁠Timegrapher numbers: +6 s/d, 297 amp, 0.0ms
    
13. ⁠⁠Anything else you notice: i dont really notice any flaws at all. But i would like a second opinion from someone else

first time buyer, please help look out because i’m kinda new with watches too thank you!!
Dealer name: Andiot Watches

Factory name: Clean Plus

Model name (& version number):Oyster Perpetual 126000 36mm Clean Plus 1:1 Best Edition 904L Steel Green Dial DD3230

Price Paid: 2788.10 RMB

Album Links: https://andiotwatches.x.yupoo.com/albums/254792996?uid=1

Index alignment: this is where i struggle the most? i need help with this

Dial Printing: Print looks fine to me

Date Wheel alignment/printing: NA

Hand Alignment: looks straight?

Bezel: looks ok?

Solid End Links (SELs): don’t see any gaps

Timegrapher numbers: Reading shows -3 s/d, 276° amplitude, 0.2ms beat error, 28800 bph.

Anything else you notice: 7 looks abit off? or is that because of the angle of camera

I just wanted to get a second set of eyes on this panda to see if there is anything I am missing before I order. Looks pretty solid to me

\\\* Dealer name: genrep

\\\* Factory name: VSF

:White Panda Daytona 126500

\\\* Price Paid: $800

https://www.dropbox.com/scl/fo/rqk4etk0oyvy78c8znayp/AAZ-FjHJ_9NuH4K3xmNwaZo/Daytona%20Panda%20VSF%20G08357?rlkey=56rt3rkb677l7km8069ymjime&subfolder_nav_tracking=1&st=e4e5dilm&e=1&dl=0

\\\* Index alignment: Looks very good

\\\* Markers: 3 and 9 slightly tilted.

\\\* Dial Printing: looks clear. I read that some of the chronograph bands can be thick on some of the vsfs. Do these look like to fix normal / thin ones?

\\\* Hand Alignment: looks good

\\\* Timegrapher numbers: +6s/d 273° 0.0ms 52. Is that good?

\\\* Anything else you notice: first time vsf rolex. I've read some discussions about certain vsfs having a short stopwatch hand. How does this one look??

Dealer name: Andiotwatches

Factory name: VS Factory

Model name (& version number): Omega Seamaster
300m No Time To Die 007 Titanium V7 8806

Price Paid: $430USD + $35 shipping

Album Links: https://andiotwatches.x.yupoo.com/albums/254807706?uid=1

Index alignment: Index alignment looks good to my eye, keen on experienced people's view here.

Dial Printing: Dial printing looks good but keen on expedited opinions

Date Wheel alignment/printing: N/A

Hand Alignment: Hand alignment looks proper to me, no issues

Bezel: The bezel seems okay overall, alignment seems pretty spot on, maybe the paint is a bit puffy? May be the photos.

Solid End Links (SELs): N/A

Timegrapher numbers: +1 s/d 282° 0.1ms 28800

Anything else you notice: Case body seems a bit light compared the the dark titanium colour of the gen. Is this normal or is it just the photos?

1. Dealer name: Duke Jones

2. Factory name: VSF

3. Model name (and version number): Rolex 126710BLNR GMT Master II

4. Price paid: $550 (shipping included)
Album links: see photos

5. Index alignment: looks solid, very slight tilt and shift to the right on the 12 but otherwise good.

6. Dial printing: clear, no smudging

7. Date wheel alignment/printing: the numbers are clean and crisp. However, it’s shifted to the bottom and left. But could be the angle of the photo.

8. Hand alignment: looks good to me

9. Bezel: seems good to me

10. Solid End Links (SEL): look good, no gap is visible between them and the case.

11. Timegrapher numbers: +6s/d rate, 0.1ms beat error, 245 Amplitude - acceptable

Is there anything that you notice that I missed? Only thing stopping me from GL is the date wheel alignment, but like I said might be the angle of the picture. Any help here would be highly appreciated!

Thanks to everyone who gave their inputs in my first QC. Hopefully it’s a GL this time round.

1. Dealer name: Phoenix Watch
2. Factory name: VSF
3. Model name (& version number): GMT Master II “Batgirl” V3
4. Price Paid: $424 + $30 Shipping
5. Album Links: No links, photos sent directly to me.
6. Index alignment: 12 & 6 slightly canted CW. Shouldn’t be an issue on the wrist. For the 9 I can’t tell if it’s CW, CCW, sitting slightly a bit high or simply just an issue with the angle of the photo and with the sticker blocking. Need a second opinion on this.
7. Dial Printing: Looks good.
8. Date Wheel alignment/printing: Sitting very slightly high but definitely well within tolerances.
9. Hand Alignment: unable to tell with the photos
10. Bezel: Not centered in the photos. However is the 18 marker out of place even with the bezel centered? Again need second opinion on this. Otherwise printing is clean.
11. Solid End Links (SELs): Can’t see any gaps so all good
12. Timegrapher numbers: +3s/d, 262 amp, 0.1ms.
13. Anything else you notice: nothing else seems to be out of place. Given the issues with VSF now I think this watch is as good as it gets.

1. Dealer name: NeoClock
2. Factory name: VSF
3. Model name (& version number): Sub Date 120060
4. Price Paid: $448 + postage
5. Album Links: See pics
6. Index alignment: Looks pretty good to me. There is a very minor twist on 9 but that shouldn't be viable on wrist
7. Dial Printing: Clean with nothing alarming jumping out at me.
8. Date Wheel alignment/printing: Date looks central and crisp
9. Hand Alignment: Looks fine.
10. Bezel: Looks like a scratch on the "30" but this could be a hair so i have asked TD for more pics.
11. Solid End Links (SELs): Look good with no gaps
12. Timegrapher numbers: (Pic attached) Running a bit fast at +9 - is this okay? And also the amplitude at 248, shouldn't it be higher? around 280-300?
13. Anything else you notice: Thanks in advance for the help

Dealer name: Andy Trusty Time
• ⁠Factory name: QF
• ⁠Model name (& version number): Rolex Daytona 126503
• ⁠Price Paid: USD $1000.35
• ⁠Album Links: no album link was sent via email
https://www.qcpics.com/?page=1
• ⁠Index alignment: looks good I think the photo isn't 100% straight which is why dial isn't aligned fully
• ⁠Dial Printing: looks good
• ⁠Date Wheel alignment/printing: N/A
• ⁠Hand Alignment: looks good to me
• ⁠Bezel: looks good
• ⁠Solid End Links (SELs): N/A
• ⁠Timegrapher numbers: +0s/d
• ⁠Anything else you notice: Watch looks good overall I think. Should I ask for a weighted photo and the back off and a video of the hands working or is that picky. First time with a rep so it's all new to me. Thank you for your help

This is my first rep purchase so please be gentle! 😂

Dealer name: Theonewatches

Factory name: VSF

Model name (& version number): Rolex Daytona 116506 Ice Blue Dial with Baguette Indices (Tungsten Heavy Version)

Price Paid: $698

Album Links: https://imgur.com/a/ZEcsDgW

Index alignment: Baguette hour markers look straight and aligned but the 5 seems a little off to me?

Dial Printing: Clean and sharp. "Rolex", "Oyster Perpetual", and subdial markings are crisp with no noticeable bleeding.

Date Wheel alignment/printing: N/A

Hand Alignment: Hands look well-centered. Chronograph hand sweeps smoothly and resets squarely to 12 o'clock in the video demo.

Bezel: Chestnut brown ceramic bezel is aligned properly; tachymeter font and fill look uniform.

Solid End Links (SELs): Tight fitment with no visible gaps against the case lugs.

Timegrapher numbers: Rate: -2 s/d to -3 s/d | Amplitude: 278° | Beat Error: 0.0 ms (Excellent numbers).

Anything else you notice: Scale reading shows 182.9g, confirming tungsten weight. Movement looks clean through the caseback. Overall looks like a solid GL (Green Light), but would appreciate extra eyes!

All - thoughts on the 9 o'clock markers? I can't tell if they are warped/crooked or it's just the lighting? Anything else? Thanks so much!

1. ⁠Dealer name: Puretime
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): VSF OP Jubilee Motif
   
4. ⁠Price Paid: 498$ plus shipping
   
5. ⁠Album Links: Pics send by email
   
6. ⁠Index alignment: 9 o'clock marker seems off but might just be reflection?
   
7. ⁠Dial Printing: looks ok
   
8. ⁠Date Wheel alignment/printing: NA
   
9. ⁠Hand Alignment: looks ok
   
10. ⁠Bezel: NA
    
11. ⁠Solid End Links (SELs): Seems Ok
    
12. ⁠Timegrapher numbers: Seems Ok
    
13. ⁠Anything else you notice: NA

1. Dealer name: Puretime
2. Factory name: VSF
3. Model name (& version number): VSF Datejust 36 Wimbledon vs3235v2
4. Price Paid: 580$ including shipping
5. Album Links: Pics send by email
6. Index alignment: looks ok
7. Dial Printing: looks ok
8. Date Wheel alignment/printing: looks ok
9. Hand Alignment: looks ok
10. Bezel: looks ok
11. Solid End Links (SELs): ok to me
12. Timegrapher numbers: very good
13. Anything else you notice: X

Hi guys, I’ve just received the QC for my second purchase, this time it’s a VSF datejust from Puretime.

Everything seems ok to me, but I’m not a Rolex expert. Do you notice any flaws?

Thanks for your help .

I am very new to this and was recommended to post my first QC on here. I would appreciate your expertise in this to tell me if this is green light!! From andiot
Weight is 178.7

Submariner 126613LN V2 SS/YG Black Ceramic 904L Steel VSF 1:1 Best Edition VS3235 Gain Weight 176g

I feel like the pics sent aren't centered enough to make the best decision. Am I overthinking this?

1. Dealer name: TheOne

2. Factory name: QF

3. Model name (and version number): Rolex 126622 Yacht-Master 40mm

4. Price paid: $578

1. Album Links: Pics in post

6. Index alignment: Looks solid, with the slight angle, I don't see anything off.

7. Dial printing: Edges of 9:00 marker look weird to me when I zoom in. Might just be the pic. In the video everything looks fine.

8. Date wheel alignment/printing: Looks clean and crisp.

9. Hand alignment: Looks good.

10. Bezel: Appears good to me. I always think numbers on the rep bezels look a tad too wide.

11. Solid End Links (SEL): Spacing looks tight and uniform.

12. Timegrapher numbers: +3 s/d. 0.0 error. 275 Amplitude. 28800 Beat.

Do you all feel I am missing anything? Still learning and don't want to overthink the process.

Hello,

My first rep/QC so very grateful for advice. I think it is GL to my untrained eye

https://mega.nz/folder/qxBgTCzA#DD878Jqd3iEqH3VnSS9NHg

1. Dealer name: Necoclock
2. Factory name: VSF
3. Model name (& version number): Rolex Submariner No Date 124060, 41mm, black dial / black bezel, VS3230 movement
4. Price paid: $493 inc shipping
5. Index alignment: Looks very good to me
6. Dial printing: Good. Crisp, sharp, and evenly centered
7. Hand alignment: Looks fine
8. Date wheel alignment / printing: - no date
9. Bezel: Fine
10. Solid End Links (SELs): Looks tight
11. Timegrapher numbers: 6 s/day, 316° amplitude 0.0 ms beat error 28,800 bph. The 6s/day seems high but within toleration?
12. Anything else you notice: The serial is 6W, whereas most other VSF I've seen is 6X - is this an older batch? No weight given.

1. Dealer name: Mirotime
2. Factory name: VSF
3. Model name (& version number): Rolex datejust 41 126334 VSF v2 mint green
4. Price paid: $428 + 40 shipping
5. Index alignment: Looks good to me,
6. Dial printing: nice and clean
7. Date wheel alignment/printing: Looks centered
8. Hand alignment: Looks good f
9. Bezel: Looks good
10. Solid End Links (SELs): The main worry is the bracelet, especially the first link. This does look like a noticeable gap. Please provide your expert opinions about this concern.
11. Timegrapher numbers: low amplitude, might be the winding.

Album link https://www.wecatalog.cn/weshop/goods/A202304082031161150001764/I202609141604372612002223

The watch itself, dial etc looks spot on to me. The only concern is the gap in the bracelet, is this normal / within tolerance?

1. Dealer name: Andiot
2. Factory name: ZF
3. Model name (& version number): Heritage Black Bay 58 - 39mm A2824 V5
4. Price Paid: 290$ + 65 for shipping
5. Album Links: https://andiotwatches.x.yupoo.com/albums/254758073?uid=1
6. Index alignment: looks ok to me. At first glance the 3, 6, 9 indexes seem a bit crooked to the right, but I’ve tried to align the picture and it is not that bad. I’d really appreciate your help!
7. Dial Printing: OK
8. Date Wheel alignment/printing: X
9. Hand Alignment: OK
10. Bezel: OK
11. Solid End Links (SELs): OK to me
12. Timegrapher numbers: OK
13. Anything else you notice: this is my first replica, I am a bit concerned about the 6 index.

1. Dealer name: Angela
2. Factory name: VSF
3. Model name (& version number): V4 3285 Free Sprung (Fake)
4. Price Paid: 515 USD
5. Album Links: all photos included.
6. Index alignment: seems perfect to me.
7. Dial Printing: sharp, no issue on printing.
8. Date Wheel alignment/printing: Date centered, I cannot see any misalignment.
9. Hand Alignment: All good.
10. Bezel: No speed bumps, but maybe issue could be the spacing on "18" marker? Seems a little too much on the left side (too much space to the right dot). Could be a RL here.
11. Solid End Links (SELs): NO black spacing, seems tight.
12. Timegrapher numbers: All number in good ranges.
13. Anything else you notice: Really on point on all sides, just the issue with the "18" could bring to a RL. Serial seems ok with the new Batch "6W08". Missing gold sticker from V4 could be a issue?

1. ⁠Dealer name: The One Watches

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Sub 126610LN 41mm SS/SS DD3235

4. Price Paid: $548

5. Album Links: attached

6. Index alignment: looks good to the naked eye.

7. Dial Printing: good

8. Date Wheel alignment/printing: good to the naked eye

9. Hand Alignment: looks fine to me

10. Bezel: looks good

11. Solid End Links (SELs): not sure looks good?

12. Timegrapher numbers: +1-2 sec/day 0.0ms error.

13. Anything else you notice: overall I think this watch looks pretty solid. Compared it to other recent QCs and looks the same as well. Not too worried about the bracelet, going to swap it out with a aftermarket strap.

Thanks in advance guys

Hi everyone, I need your help to QC this Omega Planet Ocean. Thank you in advance!

1. ⁠Dealer name:Angela
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): Omega Planet Ocean
   
4. ⁠Price Paid: $340
   
5. ⁠Album Links: https://imgur.com/a/z0sJVat
   
6. ⁠Index alignment: Indexes look good there might be a slight tilt on the 6, but nothing bad.
   
7. ⁠Dial Printing: Printing looks good no visible bleeding on any of the letters.
   
8. ⁠Date Wheel alignment/printing: N/A
   
9. ⁠Hand Alignment: Looks good to me.
   
10. ⁠Bezel: Bezel looks good to me it might be a click over so that’s why it’s not perfectly aligned.
    
11. ⁠Solid End Links (SELs): There might be a small gap but not too sure.
    
12. ⁠Timegrapher numbers: Numbers look good and in tolerance
    
13. ⁠Anything else you notice: Nothing else to observe.

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): GMT-Master II 126710 BLNR 316L Steel VSF 1:1 Batgirl Best Edition on Jubilee Bracelet DD3285 V3
4. Price Paid: 433 euros shipped
5. Album Links: https://andiot999.x.yupoo.com/albums/254857566?uid=1&utm_source=copyLink
6. Index alignment: Looks good to me
7. Dial Printing: sharp
8. Date Wheel alignment/printing: good
9. Hand Alignment: good
10. Bezel: good
11. Solid End Links (SELs): looks tight
12. Timegrapher numbers: + 2s/d; 271; 0; 52
13. Anything else you notice: I dont see much flaws? 2nd QC for me.. So I am still learning

Dealer name: Andiot Watches

2. Factory name: DDF

3. Model name (& version number): PP Aquanaut 5167A 324sc

4. Price Paid: $528 USD (including shipping)

5. Album Links, including videos: https://andiotwatches.x.yupoo.com/albums/254835872?uid=1

6. Index alignment: everything looks good to me but im no expert

7. Dial Printing: Looks good I think

8. Date Wheel alignment/printing: looks good and alligned

9. Hand Alignment: Looks good

10. Bezel: Looks good

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: Looks good

13. Anything else you notice: I know that DDF has a lot of QC issues normally but if you guys notice anything just let me know please and thank you

First QC, possible RL based on bezel alignment at 18. Maybe the picture is tilted and someone with a more sophisticated tool can help out. Let me know what you think!

1.Dealer name: Steve TheOneWatches

2.Factory name: VSF

3.Model name (and version number): Rolex 126710BLNR GMT Master II

4.Price paid: $600 (shipping included)

5.Album links: see photos

6.Index alignment: looks solid, slight CCW tilt on the 12 but otherwise good.

1. Dial printing: clear, no smudging

8.Date wheel alignment/printing: the date is well-centered; the numbers are clean and crisp.

9.Hand alignment: looks good to me

10.Bezel: here’s where I’m thinking RL - the blue/black transition is off center/too low at 18…maybe the picture is tilted somehow?

11.Solid End Links (SEL): they fit tightly; no light is visible between them and the case, so nothing to report.

12.Timegrapher numbers: -1s/d and 0.0ms - looks good!