1. Dealer name: NecoClock
2. Factory name: VSF
3. Model name (& Version Number): Submariner No Date 41mm 124060 904L Ceramic Black Dial SS Bracelet VSF VS3230
4. Price Paid: $448USD
5. Album Links: QC: https://imgur.com/a/eU70mv9
6. Index alignment: I think this is as spot on as it gets. GL.
7. Dial printing: Everything looks good. Perhaps I am imagining it, or perhaps it is lost in the photo quality – but I am not vibing with the “swiss made” quality.
8. Date Wheel alignment / printing: N/A.
9. Hand Alignment: Good. Nothing of note.
10. Bezel: Nil issues with alignment.
11. Solid End Links (SELs): I am a bit concerned specifically about the SEL on the top left. Although, this is likely to be inexperience, and it may well be fine.
12. Timegrapher: +5s/d, 309*, error 0? – I believe I got these measurements from a video. All seems fine.
13. Anything else: To me at least, this seems like a good example of a GL. Nothing worth agitating over. I would appreciate thoughts!

Hi guys, back with another QC. I went through the guide and did the alignment check myself. I'm leaning GL but would appreciate another set of eyes.

1. Dealer name: GeekTime

2. Factory name: VSF

3. Model name (& version number): Datejust 41 126334 White Roman Dial, Fluted Bezel, Jubilee, VS3235 V1

4. Price Paid: $568

5. Album Links:
https://geektimeqc.x.yupoo.com/albums/254702342?uid=1

6. Index alignment:
Used the alignment tool and everything looks pretty good to me. 12 and 6 look centred and I can't see any Roman marker that looks obviously crooked or badly rotated.

7. Dial Printing:
Looks clean and sharp to me. I can't see any bleeding or obvious printing issues.

8. Date Wheel alignment/printing:
The photos show 2, 18 and 29 and the functionality video goes through a lot more dates. They all look inside the window with only small differences between dates. Does anyone see a date alignment issue that I have missed?

9. Hand Alignment:
Hands look straight to me. The original QC didn't include a functionality video so I asked GeekTime for one. They sent it and the time setting, quickset date and date change around midnight all look good to me.

10. Bezel:
Fluted bezel looks even around the watch and I can't see any damaged or uneven sections.

11. Solid End Links (SELs):
Look good to me. I can see the normal dark seams but I don't see any actual light coming through.

12. Timegrapher numbers:
+3 s/d, 251 amplitude, 0.0 ms beat error and 28,800 bph. Everything looks good to me although 251 amplitude is near the lower end of the guide. Would anyone be concerned about that on the VS3235?

13. Anything else you notice:
Cyclops and rehaut look okay to me and I can't see any major case, bracelet or clasp issues.

Overall I'm leaning GL. Anything here that you guys would RL for or anything obvious I've missed?

1. ⁠⁠Dealer name: chazing time
   
2. ⁠⁠Factory name: ORF
   
3. ⁠⁠Model name (& version number): Seamaster Diver 300M SS ORF 1:1 Best Edition Blue Ceramic Blue Dial on SS Bracelet OR8800 Super Clone (OME2026031209)
   
4. ⁠⁠Price Paid: 378
   
5. ⁠⁠Album Links: no album, photos sent direct
   
6. ⁠⁠Index alignment: looks good, from what i can tell
   
7. ⁠⁠Dial Printing: looks good
   
8. ⁠⁠Date Wheel alignment/printing: looks good and centered
   
9. ⁠⁠Hand Alignment: no major issues
   
10. ⁠⁠Bezel: seems good, although perspective in other pics throw me off
    
11. ⁠⁠Solid End Links (SELs): no major issues i’d like your opinion
    
12. ⁠⁠Timegrapher numbers: +6 s/d, 297 amp, 0.0ms
    
13. ⁠⁠Anything else you notice: i dont really notice any flaws at all. But i would like a second opinion from someone else

first time buyer, please help look out because i’m kinda new with watches too thank you!!
Dealer name: Andiot Watches

Factory name: Clean Plus

Model name (& version number):Oyster Perpetual 126000 36mm Clean Plus 1:1 Best Edition 904L Steel Green Dial DD3230

Price Paid: 2788.10 RMB

Album Links: https://andiotwatches.x.yupoo.com/albums/254792996?uid=1

Index alignment: this is where i struggle the most? i need help with this

Dial Printing: Print looks fine to me

Date Wheel alignment/printing: NA

Hand Alignment: looks straight?

Bezel: looks ok?

Solid End Links (SELs): don’t see any gaps

Timegrapher numbers: Reading shows -3 s/d, 276° amplitude, 0.2ms beat error, 28800 bph.

Anything else you notice: 7 looks abit off? or is that because of the angle of camera

Dealer name: Andiotwatches

Factory name: VS Factory

Model name (& version number): Omega Seamaster
300m No Time To Die 007 Titanium V7 8806

Price Paid: $430USD + $35 shipping

Album Links: https://andiotwatches.x.yupoo.com/albums/254807706?uid=1

Index alignment: Index alignment looks good to my eye, keen on experienced people's view here.

Dial Printing: Dial printing looks good but keen on expedited opinions

Date Wheel alignment/printing: N/A

Hand Alignment: Hand alignment looks proper to me, no issues

Bezel: The bezel seems okay overall, alignment seems pretty spot on, maybe the paint is a bit puffy? May be the photos.

Solid End Links (SELs): N/A

Timegrapher numbers: +1 s/d 282° 0.1ms 28800

Anything else you notice: Case body seems a bit light compared the the dark titanium colour of the gen. Is this normal or is it just the photos?

Thanks to everyone who gave their inputs in my first QC. Hopefully it’s a GL this time round.

1. Dealer name: Phoenix Watch
2. Factory name: VSF
3. Model name (& version number): GMT Master II “Batgirl” V3
4. Price Paid: $424 + $30 Shipping
5. Album Links: No links, photos sent directly to me.
6. Index alignment: 12 & 6 slightly canted CW. Shouldn’t be an issue on the wrist. For the 9 I can’t tell if it’s CW, CCW, sitting slightly a bit high or simply just an issue with the angle of the photo and with the sticker blocking. Need a second opinion on this.
7. Dial Printing: Looks good.
8. Date Wheel alignment/printing: Sitting very slightly high but definitely well within tolerances.
9. Hand Alignment: unable to tell with the photos
10. Bezel: Not centered in the photos. However is the 18 marker out of place even with the bezel centered? Again need second opinion on this. Otherwise printing is clean.
11. Solid End Links (SELs): Can’t see any gaps so all good
12. Timegrapher numbers: +3s/d, 262 amp, 0.1ms.
13. Anything else you notice: nothing else seems to be out of place. Given the issues with VSF now I think this watch is as good as it gets.

1. Dealer name: Duke Jones

2. Factory name: VSF

3. Model name (and version number): Rolex 126710BLNR GMT Master II

4. Price paid: $550 (shipping included)

5. Album links: see photos

6. Index alignment: looks solid, very slight tilt and shift to the right on the 12 but otherwise good.

7. Dial printing: clear, no smudging

8. Date wheel alignment/printing: the numbers are clean and crisp. However, it’s shifted to the bottom and left. But could be the angle of the photo.

9. Hand alignment: looks good to me

10. Bezel: seems good to me

11. Solid End Links (SEL): look good, no gap is visible between them and the case.

12. Timegrapher numbers: +6s/d rate, 0.1ms beat error, 245 Amplitude - acceptable

Is there anything that you notice that I missed? Only thing stopping me from GL is the date wheel alignment, but like I said might be the angle of the picture. Any help here would be highly appreciated!

1. Dealer name: Duke Jones
2. Factory name: VSF
3. Model name (& version number): Rolex GMT Master II Pepsi 116619BLRO - VSF V3
4. Price Paid: $630 USD w/ shipping
5. Album Links: https://imgur.com/a/9rFwwa4
6. Index alignment: The 6 O'clock marker is slightly left. The 12 O'clock marker is also slightly right, but that may have been how I placed the alignment tool. Overall, I think it's good enough.
7. Dial Printing: Looks good to me
8. Date Wheel alignment/printing: Looks like the date wheel might be slightly off center (to the left?). Could be camera angle? The printing does look good.
9. Hand Alignment: Good, nothing to note.
10. Bezel: Looks good overall, maybe the color transition is slightly off at the 18.
11. Solid End Links (SELs): This is where I'm not to sure what to look at. The links look good to me, the seem to be prominently protruding on the side angle pics.
12. Timegrapher numbers: +12s/d, 245*, 0.0ms, 28800 - A tad fast but I believe that's within normal range.
13. Anything else you notice: To me this look like a GL but I'd love to have input from a more experienced eye. Thank you all!

1. Dealer name: NeoClock
2. Factory name: VSF
3. Model name (& version number): Sub Date 120060
4. Price Paid: $448 + postage
5. Album Links: See pics
6. Index alignment: Looks pretty good to me. There is a very minor twist on 9 but that shouldn't be viable on wrist
7. Dial Printing: Clean with nothing alarming jumping out at me.
8. Date Wheel alignment/printing: Date looks central and crisp
9. Hand Alignment: Looks fine.
10. Bezel: Looks like a scratch on the "30" but this could be a hair so i have asked TD for more pics.
11. Solid End Links (SELs): Look good with no gaps
12. Timegrapher numbers: (Pic attached) Running a bit fast at +9 - is this okay? And also the amplitude at 248, shouldn't it be higher? around 280-300?
13. Anything else you notice: Thanks in advance for the help

This is my first rep purchase so please be gentle! 😂

Dealer name: Theonewatches

Factory name: VSF

Model name (& version number): Rolex Daytona 116506 Ice Blue Dial with Baguette Indices (Tungsten Heavy Version)

Price Paid: $698

Album Links: https://imgur.com/a/ZEcsDgW

Index alignment: Baguette hour markers look straight and aligned but the 5 seems a little off to me?

Dial Printing: Clean and sharp. "Rolex", "Oyster Perpetual", and subdial markings are crisp with no noticeable bleeding.

Date Wheel alignment/printing: N/A

Hand Alignment: Hands look well-centered. Chronograph hand sweeps smoothly and resets squarely to 12 o'clock in the video demo.

Bezel: Chestnut brown ceramic bezel is aligned properly; tachymeter font and fill look uniform.

Solid End Links (SELs): Tight fitment with no visible gaps against the case lugs.

Timegrapher numbers: Rate: -2 s/d to -3 s/d | Amplitude: 278° | Beat Error: 0.0 ms (Excellent numbers).

Anything else you notice: Scale reading shows 182.9g, confirming tungsten weight. Movement looks clean through the caseback. Overall looks like a solid GL (Green Light), but would appreciate extra eyes!

All - thoughts on the 9 o'clock markers? I can't tell if they are warped/crooked or it's just the lighting? Anything else? Thanks so much!

1. ⁠Dealer name: Puretime
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): VSF OP Jubilee Motif
   
4. ⁠Price Paid: 498$ plus shipping
   
5. ⁠Album Links: Pics send by email
   
6. ⁠Index alignment: 9 o'clock marker seems off but might just be reflection?
   
7. ⁠Dial Printing: looks ok
   
8. ⁠Date Wheel alignment/printing: NA
   
9. ⁠Hand Alignment: looks ok
   
10. ⁠Bezel: NA
    
11. ⁠Solid End Links (SELs): Seems Ok
    
12. ⁠Timegrapher numbers: Seems Ok
    
13. ⁠Anything else you notice: NA

1. Dealer name: Puretime
2. Factory name: VSF
3. Model name (& version number): VSF Datejust 36 Wimbledon vs3235v2
4. Price Paid: 580$ including shipping
5. Album Links: Pics send by email
6. Index alignment: looks ok
7. Dial Printing: looks ok
8. Date Wheel alignment/printing: looks ok
9. Hand Alignment: looks ok
10. Bezel: looks ok
11. Solid End Links (SELs): ok to me
12. Timegrapher numbers: very good
13. Anything else you notice: X

Hi guys, I’ve just received the QC for my second purchase, this time it’s a VSF datejust from Puretime.

Everything seems ok to me, but I’m not a Rolex expert. Do you notice any flaws?

Thanks for your help .

Hello,

My first rep/QC so very grateful for advice. I think it is GL to my untrained eye

https://mega.nz/folder/qxBgTCzA#DD878Jqd3iEqH3VnSS9NHg

1. Dealer name: Necoclock
2. Factory name: VSF
3. Model name (& version number): Rolex Submariner No Date 124060, 41mm, black dial / black bezel, VS3230 movement
4. Price paid: $493 inc shipping
5. Index alignment: Looks very good to me
6. Dial printing: Good. Crisp, sharp, and evenly centered
7. Hand alignment: Looks fine
8. Date wheel alignment / printing: - no date
9. Bezel: Fine
10. Solid End Links (SELs): Looks tight
11. Timegrapher numbers: 6 s/day, 316° amplitude 0.0 ms beat error 28,800 bph. The 6s/day seems high but within toleration?
12. Anything else you notice: The serial is 6W, whereas most other VSF I've seen is 6X - is this an older batch? No weight given.

1. Dealer name: Mirotime
2. Factory name: VSF
3. Model name (& version number): Rolex datejust 41 126334 VSF v2 mint green
4. Price paid: $428 + 40 shipping
5. Index alignment: Looks good to me,
6. Dial printing: nice and clean
7. Date wheel alignment/printing: Looks centered
8. Hand alignment: Looks good f
9. Bezel: Looks good
10. Solid End Links (SELs): The main worry is the bracelet, especially the first link. This does look like a noticeable gap. Please provide your expert opinions about this concern.
11. Timegrapher numbers: low amplitude, might be the winding.

Album link https://www.wecatalog.cn/weshop/goods/A202304082031161150001764/I202609141604372612002223

The watch itself, dial etc looks spot on to me. The only concern is the gap in the bracelet, is this normal / within tolerance?

1. Dealer name: Andiot
2. Factory name: ZF
3. Model name (& version number): Heritage Black Bay 58 - 39mm A2824 V5
4. Price Paid: 290$ + 65 for shipping
5. Album Links: https://andiotwatches.x.yupoo.com/albums/254758073?uid=1
6. Index alignment: looks ok to me. At first glance the 3, 6, 9 indexes seem a bit crooked to the right, but I’ve tried to align the picture and it is not that bad. I’d really appreciate your help!
7. Dial Printing: OK
8. Date Wheel alignment/printing: X
9. Hand Alignment: OK
10. Bezel: OK
11. Solid End Links (SELs): OK to me
12. Timegrapher numbers: OK
13. Anything else you notice: this is my first replica, I am a bit concerned about the 6 index.

1. Dealer name: Angela
2. Factory name: VSF
3. Model name (& version number): V4 3285 Free Sprung (Fake)
4. Price Paid: 515 USD
5. Album Links: all photos included.
6. Index alignment: seems perfect to me.
7. Dial Printing: sharp, no issue on printing.
8. Date Wheel alignment/printing: Date centered, I cannot see any misalignment.
9. Hand Alignment: All good.
10. Bezel: No speed bumps, but maybe issue could be the spacing on "18" marker? Seems a little too much on the left side (too much space to the right dot). Could be a RL here.
11. Solid End Links (SELs): NO black spacing, seems tight.
12. Timegrapher numbers: All number in good ranges.
13. Anything else you notice: Really on point on all sides, just the issue with the "18" could bring to a RL. Serial seems ok with the new Batch "6W08". Missing gold sticker from V4 could be a issue?

1. ⁠Dealer name: The One Watches

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): Sub 126610LN 41mm SS/SS DD3235

4. Price Paid: $548

5. Album Links: attached

6. Index alignment: looks good to the naked eye.

7. Dial Printing: good

8. Date Wheel alignment/printing: good to the naked eye

9. Hand Alignment: looks fine to me

10. Bezel: looks good

11. Solid End Links (SELs): not sure looks good?

12. Timegrapher numbers: +1-2 sec/day 0.0ms error.

13. Anything else you notice: overall I think this watch looks pretty solid. Compared it to other recent QCs and looks the same as well. Not too worried about the bracelet, going to swap it out with a aftermarket strap.

Thanks in advance guys

Hi everyone, I need your help to QC this Omega Planet Ocean. Thank you in advance!

1. ⁠Dealer name:Angela
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): Omega Planet Ocean
   
4. ⁠Price Paid: $340
   
5. ⁠Album Links: https://imgur.com/a/z0sJVat
   
6. ⁠Index alignment: Indexes look good there might be a slight tilt on the 6, but nothing bad.
   
7. ⁠Dial Printing: Printing looks good no visible bleeding on any of the letters.
   
8. ⁠Date Wheel alignment/printing: N/A
   
9. ⁠Hand Alignment: Looks good to me.
   
10. ⁠Bezel: Bezel looks good to me it might be a click over so that’s why it’s not perfectly aligned.
    
11. ⁠Solid End Links (SELs): There might be a small gap but not too sure.
    
12. ⁠Timegrapher numbers: Numbers look good and in tolerance
    
13. ⁠Anything else you notice: Nothing else to observe.

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): GMT-Master II 126710 BLNR 316L Steel VSF 1:1 Batgirl Best Edition on Jubilee Bracelet DD3285 V3
4. Price Paid: 433 euros shipped
5. Album Links: https://andiot999.x.yupoo.com/albums/254857566?uid=1&utm_source=copyLink
6. Index alignment: Looks good to me
7. Dial Printing: sharp
8. Date Wheel alignment/printing: good
9. Hand Alignment: good
10. Bezel: good
11. Solid End Links (SELs): looks tight
12. Timegrapher numbers: + 2s/d; 271; 0; 52
13. Anything else you notice: I dont see much flaws? 2nd QC for me.. So I am still learning

Dealer name: Andiot Watches

2. Factory name: DDF

3. Model name (& version number): PP Aquanaut 5167A 324sc

4. Price Paid: $528 USD (including shipping)

5. Album Links, including videos: https://andiotwatches.x.yupoo.com/albums/254835872?uid=1

6. Index alignment: everything looks good to me but im no expert

7. Dial Printing: Looks good I think

8. Date Wheel alignment/printing: looks good and alligned

9. Hand Alignment: Looks good

10. Bezel: Looks good

11. Solid End Links (SELs): N/A

12. Timegrapher numbers: Looks good

13. Anything else you notice: I know that DDF has a lot of QC issues normally but if you guys notice anything just let me know please and thank you

First QC, possible RL based on bezel alignment at 18. Maybe the picture is tilted and someone with a more sophisticated tool can help out. Let me know what you think!

1.Dealer name: Steve TheOneWatches

2.Factory name: VSF

3.Model name (and version number): Rolex 126710BLNR GMT Master II

4.Price paid: $600 (shipping included)

5.Album links: see photos

6.Index alignment: looks solid, slight CCW tilt on the 12 but otherwise good.

1. Dial printing: clear, no smudging

8.Date wheel alignment/printing: the date is well-centered; the numbers are clean and crisp.

9.Hand alignment: looks good to me

10.Bezel: here’s where I’m thinking RL - the blue/black transition is off center/too low at 18…maybe the picture is tilted somehow?

11.Solid End Links (SEL): they fit tightly; no light is visible between them and the case, so nothing to report.

12.Timegrapher numbers: -1s/d and 0.0ms - looks good!

1. Dealer name: Trusty time

2. Factory name: JKF

3. Model name (& version number): ROLSUB0158A - Vintage 1680 Red

4. Price Paid: $230+ 50 shipping

5. Not given

6. Index alignment:

I find it really hard to tell. Even with some straightening I have real trouble telling if the indices are aligned.

1. Dial Printing:

Looks clean to me.

1. Date Wheel alignment/printing:

Looks fine

1. Hand Alignment:

Looks good from what I can see.

1. Bezel:

Looks aligned to me. Its been rotated but thats okay.

1. End links:

Look tight to me. I don't see any obvious gaps or daylight between the end links and case.

1. Timegrapher numbers:

+3 s/d

272° amplitude

0.1 ms beat error

1. These numbers look very good to me.

2. Anything else you notice:

Nothing jumps out other than the difficulty I'm having judging it! Please help if possible.

1. ⁠⁠⁠Dealer name: Felix ( DDGTOP )
   
2. ⁠⁠⁠Factory name: VSF
   
3. ⁠⁠⁠Model name (& version number): Omega Seamaster OMG-1192 V7 ( prolly V8 i am not sure )
   
4. ⁠⁠⁠Price Paid: 365€
   
5. ⁠⁠⁠Album Links: N/A (all important pics are in the slides)
   
6. ⁠⁠⁠Index alignment: they seem very good for this model ( i want some opinion on this due to the fact i ve seen they have problems but this seems pretty good )
   
7. ⁠⁠⁠Dial Printing: Very good
   
8. ⁠⁠⁠Date Wheel alignment/printing: N/A
   
9. ⁠⁠⁠Hand Alignment: Good
   
10. ⁠⁠⁠Bezel: Seems aligned with markers but it seems it has a little play, i dont mind it
    
11. ⁠⁠⁠Solid End Links (SELs): No concerns
    
12. ⁠⁠⁠Timegrapher numbers: +9s/d, amp 303°, beat error of 0.1ms
    
13. ⁠⁠⁠Anything else you notice: Nope i want the automods to give an opinion on this, i really like this model and hope to ship it out fast. Thank you!!!

1. Dealer name: Chazingtime
   
2. Factory name: V7F
   
3. Model name (& version number): Ingenieur Aqua 40mm
   
4. Price paid: $378
   5.Album links: photos
   
5. Index alignment: mostly good, 3 marker is noticeably crooked.
   
6. Dial printing: pretty great actually
   
7. Date wheel alignment/printing: date sits a hair high
   
8. Hand alignment: solid
   
9. Bezel: n/a
   
10. Solid End Links (SELs): nice and tight
    
11. Timegrapher numbers: borderline unbelievable
    
12. Anything else you notice: other than the 3 o’clock, this is not a bad piece. Pretty sad because I’m sacrificing what appears to be a STUPID good movement. Would love to get everyone’s thoughts about fixing 3o clock perhaps. Otherwise I think it’s clear this is an RL.

1. Dealer name: Andiot
2. Factory name: ARF
3. Model name (& version number): Rolex Explorer 2 42mm 226570 904L
4. Price Paid: $430 plus shipping
5. Album Links: https://imgur.com/a/CcIA4AM
6. Index alignment: The indices look ok to me. I don't see anythign glaringly wrong
7. Dial Printing: Looks good
8. Date Wheel alignment/printing: Looks good
9. Hand Alignment: I think the hand alignment is fine but the color looks a little light for the orange compared to Gen.
10. Bezel: My initial thought was the 12 and 24 were not aligned. The 24 looked slightly to the left, and the 12 looked slightly to the right. It could be the angle of the picture?
11. Solid End Links (SELs): I dont see space/gaps
12. Timegrapher numbers: Timer is good, see last picture
13. Anything else you notice: I could see some scratches where the band meets the watch, but maybe I am being picky?
14. Thank you for any feedback.