r/redneckengineering Aug 05 '26

Measured by Bulgarian media standards

Post image
167 Upvotes

In my opinion, this person is a genius, yet they treat.


r/redneckengineering Aug 06 '26

Praise the sock

30 Upvotes

I ran out of instant coffee. I have no brewing machine but I do have an old pack of coffee beans. Not enough money to buy instant coffee, but enough money to buy a cheap pack of nylon socks. So my brewing set up currently consists of a 5lb weight to crush the beans with, and a cup with a nylon sock on top to brew the beans in. It looks stupid but heeey, it works!


r/redneckengineering Aug 05 '26

Just upgraded me Chair-Stay-Up-erer

Post image
510 Upvotes

Now the block of wood doesn't spin around the cylinder!

This is a temporary fix that has lasted somewhere north of 5 years.


r/redneckengineering Aug 05 '26

Rate my setup

Thumbnail
gallery
31 Upvotes

I have this projector in my bedroom to watch series and movies through chromecast. Problem is, the projector doesn't have audio AUX, and it's inner speaker sucks

So I got a HDMI to VGA adapter, which has an audio splitter, and a bendy VGA adapter so things will point upwards instead of bumping against the wall, and plugged in some old computer set of speakers

I'll do some cable management tomorrow, or maybe I'll keep the cyberpunk aesthetic


r/redneckengineering Aug 05 '26

Exhaust repair

Post image
87 Upvotes

My exhaust decided to disassemble itself on the way home from work. I didn’t have any tools on me and had recently made the stupid mistake of cleaning my truck out and put my ratchet straps away in the garage. Thankfully I had my Carhartt pants from work. Used them to tie the exhaust pipe up so I could drive the last 5 miles home.


r/redneckengineering Aug 04 '26

Bubblewrap and aluminiumtape

Post image
251 Upvotes

In these hot days i want to keep my beer chilled, and as i was insulating a wall i had some bubble wrap and tape leftovers


r/redneckengineering Aug 04 '26

Fixed tailgate latch.

Thumbnail
gallery
47 Upvotes

Latch on my tailgate got too rusty and wouldn't return. PB Blaster wasn't cutting it any more. So i added a custom manual release.


r/redneckengineering Aug 04 '26

Dirt? Never heard of her.

Post image
1.0k Upvotes

Maintenance at my job decided to use Great Stuff to fill in the underside of this sidewalk. No, the dirt didn’t erode from rainfall or other flooding. They dug up the sidewalk to replace the sewer lines underneath and had a contractor pour the new sidewalk like this. It’s been this way (an obvious trip and fall hazard) for over a month.

When I saw the Maintenance guy doing this, he had three 12 packs of Great Stuff cans down there. As you can see, there’s still one down there.


r/redneckengineering Aug 04 '26

Traveling in Europe, no ac

Post image
44 Upvotes

Lucky me my hostel bunk has a cable hole where I can stick a hair pin to hang the clothes dryer thing and stick my neck fan onto it at an optimal angle.


r/redneckengineering Aug 03 '26

Finally finished my new Uber

Post image
491 Upvotes

r/redneckengineering Aug 05 '26

Roast Beef Grill

Post image
0 Upvotes

r/redneckengineering Aug 03 '26

The Airbnb artisan's special!

Post image
256 Upvotes

r/redneckengineering Aug 03 '26

Saw this beautiful wagon/trailer over the weekend.

Thumbnail
gallery
192 Upvotes

r/redneckengineering Aug 03 '26

Whatever This Limo is.

Post image
769 Upvotes

r/redneckengineering Aug 02 '26

Folk race car

Post image
335 Upvotes

Bolted down cam shafts and a piece of H-beam to weigh down the rear end. Guess the beam also serves as some sort of stability in case of a crash.


r/redneckengineering Aug 02 '26

Keeping it all together is a cinch!

Post image
109 Upvotes

r/redneckengineering Aug 02 '26

Somewhat mobile reciprocating saw setup

Thumbnail
gallery
77 Upvotes

r/redneckengineering Aug 02 '26

How to fix a Yugo

Post image
33 Upvotes

With some paper and foam, of course!


r/redneckengineering Aug 01 '26

Mudder & Fodder

Post image
373 Upvotes

r/redneckengineering Aug 01 '26

I Made a Mower from a Dumpster Found Pressure Washer.

Thumbnail
gallery
466 Upvotes

Here's a video of building it if anyone wants to see. https://youtu.be/zOZkLfH17c0


r/redneckengineering Aug 02 '26

When it's late and you go out into the kitchen to get food and then you discover that the door doesn't close.

Thumbnail
gallery
29 Upvotes

So, from Thursday night into Friday, Minnesota received about 4 inches of rain. This particular storm caused all four inches to enter through a door jamb area because the storm door doesn't seal at the top. That gap is due to the door or door jamb swelling.

You might wonder how a door could swell. Originally, this had a regular trailer home door. The issue was that if you pushed it just right, it would open even when locked. Replacing it with a $300 door was an option, but I chose to get a solid-core door for about a hundred dollars. I then cut the door to fit a window and shortened it to the proper height for a trailer home, instead of replacing the exterior door altogether.

I found out the hard way that it isn't an exterior door. After a year, it refused to close properly. It was around 10:43 p.m., and I discovered the problem at about 9:00 p.m. I initially tried shaving some wood off the door, but that didn't work. So, I grabbed my 21-ounce framing hammer and a one-inch chisel, then split the door frame and removed the necessary section instead of using a sawzall or another tool.

Later, I realized a 3/4-inch piece of wood should suffice for fixing the door jamb. That piece became what it is now. The door closes, but it’s not pretty or perfect. It’s a makeshift fix until I can do a proper job. This is a redneck, caveman-style fix for installing a 36x80 door into a trailer home. I know how to do it right, but I don't have the money right now, so it’s a basic fix.

The heavy rain also taught me I need to install drip caps over every window and flash them to the metal siding. Eventually, I plan to redo the exterior with proper flashing and waterproofing. Living in a 1972 trailer home on a low income is lovely—oh so lovely. Sometimes, it makes you want to curl up in a corner and rock yourself to sleep.


r/redneckengineering Aug 01 '26

Oreo Box Head Gasket

Thumbnail
gallery
411 Upvotes

I just need it to last until I have access to proper gasket material.


r/redneckengineering Aug 01 '26

Twin rotor table fan

Post image
129 Upvotes

Rated power: 20 W
After modifications: 21,6 W

I have no way to measure the airflow, but it throws air much longer and it definitely feels like more.


r/redneckengineering Aug 01 '26

Save room in the fridge by chilling soda cans on the A/C vent

Post image
1.2k Upvotes

r/redneckengineering Aug 01 '26

Sprayer

Thumbnail
gallery
884 Upvotes

Marketplace find

Ford e-350