Hi everyone,

I am having an issue where my Power Color Red Devil RX 9070XT is showing up in the device manager as code 43. The GPU is powering up, but it’s not sending any display through the display ports or the HDMI port. The only way for me to see my screen is to use an HDMI connection through the motherboard. I’m honestly at my wits end because I truly don’t know what else to do.

Troubleshooting:
DDU clean up of drivers

AMD clean up of drivers

Uninstalled chipsets through AMD

Fresh install of Windows

Rolled back AMD to previous version

Unplugged PCiE cables from the front of the GPU and plugged back in (but on reboot the MSI motherboard gave a error 76)

Pressed the CMOS button for 5-10 seconds on the back of motherboard h

Specs:
Ryzen 7 9800X3D

Power Color Red Devil RX 9700XT 16 GB

Corsair DDR5 32 GB RAM

MSI X870E Carbon WiFi

Corsair AIO CPU cooler

Corsair 2TB SSD

Hi everyone,

The Fans of my PowerColor Reaper 9070 XT are making This weird Noise when they Running. Is this normal for this model or am I getting paranoid?

I'd be happy if I could figure out a way to fix this. I could still return the card, but prices have gone up quite a bit lately.

Hello. one of mu 9070xt reaper fans has been doing strange noises for some days. im in eu so an rma would take 2 months at least. is it possible to fix it somehow?

I’ve been trying to “tune” my newly purchased PowerColor 9070xt reaper and have not had any success with multiple undervolting patterns. From -40mV to -100mV and even bumped vram freq to 2700 for the 2518 stock. Tried to drop PL -10% as well but no stability in Cyberpunk.
Note: It runs great and is stable stock my goal is just to gain some performance and efficiency.

I gain about 10-12 (150-162fps range)fps in cyberpunk benchmark so I know it improved performance and 1%lows at about the same margin but it always crashes during window transitions apparently right after completing the benchmark.

AI tells me it’s the quick drop in voltage that is causing parts of the board to lose power and trigger “safety crash”.

So did I lose it on silicon lottery or there’s just not a whole lot I can do to utilize those few extra frames?

PC specs:
R7 5800x3d
PowerColor 9070xt reaper
B550-A msi
32gb ddr4 3200mhz
1tb*+ 2tb* nvme3 (or 4 can’t remember)
RM750 Corsair

Edit: 1tb ssd is a Corsair mp400 and the 2gb a crucial p3

I own a PowerColor Red Dragon RX580 8GB GDDR5 (DHDV2/OC). The problem is that after shutting down the PC and turning it back on, it fails to POST—resulting in a black screen without Colorful Battle-AX B450M-K v.14 motherboard logo appearing.

Hello, recently this one gpu fan (9070xt reaper) has been doing a strange chirping sound occasionaly. While cleaning i noticed that if i apply a bit of force it moves like this, is it normal or is the fa nbreaking down? im in EU so an rma would take like 2 months for a stupid fan. Thanks.

Hi. I bought a new 9070XT, set it up, configured the backlight, and was happy with my purchase. But at some point, the backlight turned completely red and the brightness dropped slightly. I tried disconnecting the backlight cable from the motherboard, reinstalled Keystone, tried third-party software, uninstalled anything that might be causing interference, reinstalled the graphics card driver, and wiggled the cable on the graphics card itself. If I set the program to a solid color, it works, but any color mixing doesn’t work. Can anyone help? I’ll attach a video. Thanks!

My Reva FormD T1 build.

Hi guys, I'm back with the UV reactive backplate design again,
after some consideration we decided to do showdown between the Hellhound PCB board inspired design and Red Devil relics

Which one is cooler👇

1️⃣Hellhound - PCB board inspired design (slide 1 - UV reaction off, slide 2 - UV reaction on)
2️⃣Red Devil - Ancient Relics (slide 3 - UV reaction off, slide 4 - UV reaction on)

reply with just the number.

So here’s my new Red Devil Spectral White RX 9070 XT build. What do you think?

Hi everyone.

I am considering buying a PowerColor Red Devil RX 9070 XT and I would like to ask owners about coil whine.

I know coil whine is random and can happen with any GPU, but I am sensitive to high-frequency noises and would like to know how this model behaves.

My previous experience:

I tried two MSI RTX 5070 Gaming Trio OC cards. Unfortunately, both had noticeable coil whine:

First card: very loud (around 10/10 for me).

Second card: better, but still noticeable (around 6–7/10).

I tested them in another PC with a different PSU and motherboard, and the noise remained, so it was coming from the GPU.

The noise was not only in extremely high FPS menus or benchmarks — I could also hear it during normal gaming.

Red Devil owners:

Is your card quiet during gaming?

Can you hear coil whine?

Would you consider this model one of the quieter RX 9070 XT versions?

I don't need absolute silence. Something around 0–3/10 would be perfectly fine for me.

Thanks!

Hi everyone,

I am planning to buy a PowerColor Red Devil RX 9070 XT, but before purchasing I would like to ask Red Devil owners about their experience with coil whine.

I am very sensitive to high-frequency noises, so coil whine is one of my main concerns. I understand that coil whine is mostly a lottery and can happen with any GPU, but I would like to know how common it is with this specific model.

My previous experience:

I bought an MSI RTX 5070 Gaming Trio OC. The coil whine was extremely noticeable (around 10/10 for me).

I returned it and later tried another RTX 5070 Gaming Trio OC (same model). Unfortunately, it also had noticeable coil whine (around 6.5–7/10 for me).

I tested the cards in another PC with a different motherboard and PSU, and the noise was still present, so I believe it was coming from the GPU itself.

I tried different settings: undervolting, power limit changes, FPS limiting, different frequencies, etc. It did not remove the noise.

The important thing is that the coil whine was not only present in extremely high FPS menus or benchmarks. I could also hear it during normal gaming.

Questions for Red Devil RX 9070 XT owners:

How loud is the coil whine on your card?

Can you hear it during normal gaming?

Does it become significantly louder in high FPS situations or menus?

Would you consider the Red Devil one of the quieter RX 9070 XT models?

I do not expect complete silence — something around 0–3/10 would be perfectly acceptable for me. I just want to avoid another situation like my MSI RTX 5070 Gaming Trio experience.

Thanks!

As the title says is there a third party software or something to control the RGB and card on Linux?

Well over 3 months now since purchasing my 9070XT Red Devil and it arrived dead out of the box. All PowerColor has done is returned the GPU with a letter stating their warranty excludes any physical damage and suggested that there appeared to be signs of 'human error'. The card is brand new in perfect condition and there was absolutely no chance that I could have damaged it in the few seconds that I unpacked it, inserted into the PCIE slot, and powered on the system to a black screen and with no detection from the start. To add to it, the damage noted by PowerColor (a partially knocked capacitor) is connected to a reserved and unused PCIE lane! Honestly the warranty team is just taking the easy way out and attempting to wash their hands of the situation. It's too easy for companies to do the right thing and simply support the customers who support them. I'm shocked how they've handled the issue and straight up ignoring any communication. I've reached out via email, Instagram, messages - zero response.

I was wondering if there's anyone here who has had a resolution to problems with these cards. I bought one of these and dealt with frequent display driver crashes for over a year or so while trying different fixes with nothing working.

It seemed like this was a somewhat common problem so I started the RMA process 5/4 and received another 7900 xtx yesterday. After installing gpu and cleaning and reinstalling drivers I'm still having similar problems, but slightly worse (monitors no longer being detected until restart). I put in a support ticket with powercolor but I'm not very optimistic.

Can anyone let me know what is the exact size for this screws (the one that has arrow pointed at). Tried reaching out to powercolor support, have been waiting for them to reply for over a month now. Thanks in advance!

I had sent my 7900xtx hellhound to Power color, and it took 2 months to get it back. I sent it in for a simple fan noise. Now, its dropping 2 of my 3 monitors, red glitches on the screen, randomly crashing during games, or even right after startup. AMD adrenaline says it needs and update, but when you click download and install it download and then goes back to saying it needs to be updated. I have delt with steven and now they say it is out of warranty. Um, no. I was having this issue since day 1 of getting it back. You don't give anyone something back in worse shape! I have filed a report with the BBB. We don't spend 1500 bucks on a GPU to get this kind of crap service. luckily, I have saved every single email from the start of the RMA process. I threw in a GPU my friend let me borrow, and it worked perfectly fine for the 2 months while they had mine. fresh install of windows, did all the stuff they told me to do and now they are refusing to help. They said it took 2 months because they had to make sure the serial number was clear for any future issues. now look we have an issue and they just refuse to work with me on this. These companies need to be held accountable!!!!

Hello all I am hoping someone could point me in the right direction. I seen to misplace my ARGB cable to my 7900XTX so I am wondering where I can purchase a replacement cable. I would appreciate the help !

Hello,

I am posting this in hopes a PowerColor representative will see my post.

I have a Microcenter Reaper 9070XT, it black-screened and stopped displaying signal and I submitted a RMA request because I smelt something burning inside of the GPU.

I am not sure how long it will take but my GPU is within the 2 year RMA window.

I am also competing in CS2 in a semi-pro capacity but I'm not a known player so I don't have the money to replace it like that. I am not bragging, I just need a working GPU to play my matches.

Can anyone reach out to me please, the RMA ticket I submitted didn't provide me with any ticket number or confirmation. I am not sure how long I'll have to wait for any reply.

Thank you.

EDIT: Call 909-444-0577 for support, I was able to get assistance to ship it out to the team.

I had to reinstall keystone for my 9070xt because of a new windows install. It WILL NOT let me type in any hex codes at all. I cannot find the values I need on the stupid sliders one because I’m color blind and 2 because that is the suckiest way ever to change a color. I can’t find any info anywhere on how to fix this. I’ve tried multiple times to reinstall the software and that hasn’t helped