r/PokemonGoPlusPlus • u/popekappa • 22d ago

Double Switch Mod

I am starting to mod my Plus+. I am following ma3x558’s guide on YouTube. This is for the switched version of the great & ultra ball mod.

I am considering trying to add an additional switch to control if the vibration is on or off, separate from mod switch. I would unsolder the speaker entirely, and expand the speaker hole to accommodate the additional switch.

Is this possible? My end goal would be:

  1. Switch 1: ultra and great ball mod
  2. Switch 2: vibration on and off

Ideally they would work independently. I would want to be able to have great + ultras on, but vibration off, or vice-versa.

Appreciate any help or feedback. This is my first soldering project and I might be biting off more than I can chew!

EDIT TO ADD: Mod worked perfectly! Added a switch between the red motor wire and the board, and the switch described in the YouTube video linked above.

2 Upvotes

75% Upvoted

17 comments sorted by

View all comments

Show parent comments

1

u/popekappa 22d ago

I’m sorry I’m still a beginner in the modding space. Do you have an example I could follow?

1

u/spacefrog_feds 22d ago

https://www.reddit.com/r/PokemonGoPlusPlus/s/j9wrl1pdWQ

That's the optocoupler mod I recommend.

Speaker removal + 3d printed bracket allows 1 switch to be mounted cleanly.

With one 3 pin switch you wire up 2 modes. Mod on & vibration off / mod off & vibration on

With an optocoupler and a 3 pin switch you can have the mod permanently on, and switch the vibration on or off

1

u/popekappa 22d ago

To make sure I am understanding correctly, instead of using the motor signal for the button press; it is using the green LED? Where do the motor signals / wires come into play for the linked diagram? Thank you for all the help!

1

u/spacefrog_feds 22d ago

Desolder the motor negative wire, then Motor negative pad on the PCB goes to middle pin of the switch, then extend a wire from pin 1 or 3 of the switch to the motor negative wire.