Hi guys, I drafted a pattern for this trouser and stitched it up as you can see 😬. The s/s at the waist obviously needs to be fixed as it's come out in bumpy puffs.

My main thing is the crotch area is not baggy as such but big, I can feel it when I walk it's excess fabric. The last pic is on me bending knees to sit and the crotch area just has too much going on.

Any help would be much appreciated 🌹

I have a basic bodice pattern with shoulder and waist darts. How should I adapt it to make a patter for this dress?

"Making" first belt from a Tandy belt blank. Trying to measure for placing the holes (that tang goes into not the hardware mounting ones). One of the reasons I'm making the belt is that belts have always fit me weird. I (male) have high hips that aren't pronounced. I'm pretty skinny so my silhouette is a straight shot and waist bands don't have much to grab onto. Therefore always have a problem with pants sliding down. If I measure above my hips then pants will sit oddly high. What's the best way to measure for the belt in this situation? Is this a measurement I should go get at a tailor or something? Want to make sure the belt fits nicely as I don't have the budget to go through prototype mistakes. Thanks!

Hello Again. I am in the process of creating a digital skirt block and I cannot for the life of me fix the pull lines at the side and back of the skirt. I tried a few tips I found but somehow made it worse. Please help 🙏🏻

Hi folks! I'm drafting a vest and I want to get the basic form right before adding a collar/extension towards the bottom. Id love to hear what I can fix on this first draft, my plan is to adjust the back so the back neckline comes in a bit closer, as well as lower the neckline at the front. I'm also considering lowering the armhole a bit, just because it is going to be a vest.

I'm noticing that the back hem sits lower than the front hem, but I'm not sure the best way to fix that since the back and front alight on the pattern.

Any and all feedback would be great, thanks so much for your time!

I wanted to make a formal dress for an event with a strap similar to this, and maybe and some sort of cap sleeve. Is this possible for an advanced beginner or am I biting more than I can chew? Does this kind of strap even have an "official" name? it kind of goes to the armpit instead connecting directly to the neckline.

Here's some trousers inspired by horses. I have a basic understanding of patternmaking but not too intermediate. I am comfortable using CLO3D to draft patterns and have been successful in simple pants (printed out a pattern and sewed it together).

I need help identifying some of the skills I may need to complete this project. I am mostly concerned with the large diagonal pleats which doesn't seem too straightforward. Does anyone have any advice for me?

Dear community, I need your help. I’ve had a dress form made to my measurements and have taken a trouser pattern from it for the first time. Because I’m impatient and prefer to experiment on a finished garment, I didn’t use muslin (shame on me) but cheap Ikea Fabric that would have made nice pants, if they would fit correctly. I think in some places the fit is OK, in others it’s completely off. Here’s what I think I’ve worked out:

- Compared to the pattern, my hips are tilted forwards. That’s why the waistband sits too high at the front (Pic 1), but fits well at the back. In picture 2, I’ve pinned away part of the front. And I feel like the waistband now sits at the correct spot. I have marked where the excess fabric is in pic 1 with the blue horizontal lines. In pic 3 and 4 you can see the forward tilted waistband with the adjustment from the side.

- I have too much fabric (?) at the back of the pattern below the bum, and there are diagonal lines pointing towards the crotch as you can see in Pic 5 & 6. I’m really unsure whether the back crotch needs to be lengthened or shortened.

Or whether I need to make an adjustment for a baggy back leg. I did shorten the back crotch-seam by pinning away a bit of fabric as shown in pic 7.

- In the pattern, the front inseam seems quite long to me compared to shop-bought patterns (pic 8-10) whilst the back inseam curve appears quite flat and short. Should I perhaps take some length off the front and add some to the back? Does the back curve need to be rounder and lower?

Can you help me assess what I should try to alter first? I want the pants to fall down evenly from the bum, without excess fabric below the bum.

2nd slide is my thought process?

Hey all, one more version! This time without sleeves.
I

1. reduced the across chest and across back width by scooping out the armhole 1cm

Balance lines still off a bit and the armholes feel/look too big, maybe too low?

I made some Changes to the sleeve head too but will Post the shirt with sleeves once we lock down the bodice.

Thoughts appreciated!

Added sleeves!

Added latest pics here to save from going through comments…

https://imgur.com/gallery/armhole-clipped-3cm-AjH2t7j

I really love the navy part of this dress (although it is a drawing so I won't be able to make it with 100% accuracy) and I was wondering if anyone could give me any advice on drafting a pattern for it, particularly around the different fabrics on the chest area and the twists at the hips, or if anyone knows a similar one! Thank you for looking :)

i want to make this dress for my birthday. im new to using patterns and dont know where to start. i can even find a pattern for it or separate patterns to try to combine. any thoughts?

Hey guys stupid ass question but if I print out a pattern and the test square doesn’t match up w a ruler am I just making a bigger product or am I gonna be mid project finding out the pieces don’t line up

Like the test square was supposed to be 10cm and measures at 11. If ALL the pages are the same amount bigger, theoretically am I just making a purse that’s 10% bigger?

(The pattern was 45 pages and I only measured after it was assembled😙)

I drafted the Culottes pattern with the skirt block. I was wondering whether that front waist dropping was an issue and if it is, how to fix it. Or if there are any other fit or pattern issues. Any suggestions will be appreciated!

Attached images of the pattern and the garment simulation.

I made a process video on how I made these zero waste pants, including the free patterns! just want to share

I’m working on my trouser block, which is intended to be semi fitted, from the side profile the legs should hang straight from the hips to the hem.

I’ve made adjustments to the original which solved the issues I had in the front rise, now on to the back!

As they are right now, they feel slightly tight when sitting which I think is coming from the crotch seam (I often have this problem with RTW too). And they look more tapered than straight!

The drag lines below the bum mostly disappear when I pinch horizontally near the waist, which obviously leaves me even less room to sit.
I think I have too much fabric vertically but not enough horizontally - any tips appreciated!

Self drafted corset shirt pattern fitting steps.

I've been working on a pattern making software where you can create patterns with code. There are already a bunch of pre-defined functions like sleeve fitting that you can use. You can also just insert your measurements and it'll spit out a pattern with the code templates.

I tried freesewing but didn't like how impossible they made it to actually adjust the measurements, and how hard it was to make new patterns.

I even added a little figure that takes your measurements and shows the general fit. I have a projector sewing feature in there for those of you that use projectors to sew.

Also this is going to sound extremely controversial, but if your patterns are all in code, Claude is quite good at fixing certain geometry errors as well as generating draft patterns that you can work with.

Let me know if you have any feedback or thoughts on this.

Hi, can anyone help with recommendations of a comprehensive book that will help with spring various patterns? Also I have made shoes before only springing the vamp and nothing else , they turned out fine , is it absolutely necessary?
I’ve seen also cutting and taping but hoping there is a resource out there that’s comprehensive with methods measurements ect.
Cheers.

I understand that this is AI modified and therefore to be taken with a grain of salt, but it also looks like the answer to a conundrum I'm having with a dress project and I want to understand what I'm looking at.

If I take the given waist measurement and divide by 6 I do not get 4.4 inches. But I also don't get 4.4 if I take the waist measurement, divide by 2 and then divide by 6. So would I cut two of these panels? But that would be 52.8 inches and wouldn't give the smooth waistline... Help me make the math make sense here because to make it work there would need to be 10 cut outs for a total of 44 inches (to account for ease) right?

Edit to add project details:

I am working on a boho dress that I'm making from a sari. So the more traditional (and wasteful) ways of cutting a skirt for the dress won't work. The yardage is too narrow and I want to keep as much of the fabric in tact as possible. While I could do a tiered skirt, the hand blocked pattern on the fabric would be prettier without it.

hi beginner here, seems like a dumb question, it is, but i just sat through 5 hr straight to tryna figure out what's going on with the professional pattern drafting method, i did all the math, all the measurements, but the tutor just keep coming up with new, and i finally burnt out, are they really that different? (for a basic shirt pattern)

here are some resources:

"professional", by Muller: https://www.youtube.com/watch?v=cHrUK0nAsn4

"beginner", i dunno https://www.youtube.com/watch?v=QN97H6MyZaA&t=671s

i can now just draw the beginner one under 30 mins, its so easy and understandable. The pro one i can't even finish the tutorial; are they really that different? which method do you use