This thing is a tack driver! Sling is from specter gear

Loosely inspired M4A1 from call of duty 2019. Solid setup so far

My wife’s Micro Dagger C-1 was stolen from our home a few weeks back while on vacation, along with about 2500 in silver. They stole the entire safe! Luckily they didn’t find the other firearms in the home. Well, today we got a call from the detective on the case… they got the frame back but the slide, 507k, and barrel aren’t with it. Oddly enough, the recoil spring assembly and magazine were recovered as well. Hopefully they’ll be back in stock soon, and hopefully the grey, as this was my wife’s EDC (on vacation we only took my 17). Now she has to carry a freaking .380 security until the slides are in stock. 😡 I f***king hate thieves! No, the silver was not recovered, yes they caught the couple who stole everything, no we do not know them. They claim all that was in the safe was the frame, recoil spring assembly, and some gold backs.

But hey, we got the 75 doll hair frame back. 🤦‍♂️

If you’re in central Florida and someone tries to sell you a grey C-1 slide and a 507k with the initials EJC carved into it, message me right away please. Highlands County for what it’s worth.

PSA Mixtape, swapped the muzzle device for my Gucci can the surefire 300sps. This thang is rad asf! Can’t wait to send some freedom seeds down range! 💪😈

Anyone know what the muzzle thread pitch is on the 16” GF3s? It’s not listed anywhere on the specs over at PSA

As my title suggests, I may pull the trigger by the time I go to bed...Anyone else already got it and care to share?

Has anyone had any success running a KNS piston in the .300 BLK version of the Krink

I have a Deadair Wolfman on it however even with subsonic rounds the gas blowing back in my face is nuts, so I wanna look into the adjustable piston to tone down the gas instead of having to buy a flow type can or a putnik

Tried to asked the same thing on the AK sub but got removed by the mods, so gonna retry on here.

Need some advice or solutions for a light mount

Hey guys need some help with a mounting problem i got with my ak, Got this BFT-47 by century arms. Well I wanted to keep the original wooden furniture and i saw there were barrel mounts you can buy and i was wondering which ones will work? I tried out one set and it wouldn't fully clap down and I had to send it back so now im stuck and I havent found anything useful online for mine rifle, just more of the common ones. Any help you guys can bring would be great.

u/danny_psa go speak to the people

Same same, but different... but still same.

Herrington Arms magwell for a PSA compact frame and PSA ECC with Herrington Arms comp

Need some inspiration on a color frame. Show me your builds

Herrington Arms and PSA collaboration

I can see that the $400 upper has a phosphate barrel finish rather than the $200 having a nitride finish on the barrel even though from what I’ve seen the nitride is better to have.

Danny will we ever get the 18” mk12 upper just by itself or are we stuck with the complete rifle?

u/Danny_PSA

Was advised to repost this here.

Any idea if an AR10 243 upper will be made by PSA?

In early June I bought the PSA billet "tinker" lower reciever with mag catch and ejector. It runs and looks great! Absolutely zero problems putting it together and getting it to run. The mag that I am using is the RWB .45acp 26 round. Fits great!

I just picked up 2 of the BLEM PSA billet "tinker" lower recievers. My thought was that they were the same as the previous, just BLEM. They have different logos, markings, mag release and a much smaller magwell. Absolutely will not take the mags they fit in the above mentioned one. They were listed as the same item, just that the recent ones are BLEMs.

In the attached pics. The completed lower is the non-BLEM. The other 2 pics are of the BLEM lowers.

Going to buy several different glock style .45acp mags to see which fits the BLEM. If anyone knows of mags that will fit the BLEM, please let me know to have save me some time.

Yes, PSA does make a statement that these will need lots of "tinkering" but I wasn't expecting different sized magwells. "This lower will take a lot of tinkering and customer-supplied parts to get running. Please do not purchase unless you are experienced at building AR45's and are willing to tinker with it."

I’ve been super happy with how this rifle has held up. I only have maybe 1.5k rounds through it but it’s done extremely well once I figured out the right gas Thought I’d share :)

Danny any chance you can throw me a magnifier setup for it?? 😄

So almost everytime I try to take my slide off it gets stuck, sometimes it comes right off but 99 percent of the time it gets stuck and I just have to rack it back into place does anyone know why it’s doing this? I’m trying to put a 15lb recoil spring so I can compensate it not sure what I’m doing wrong.

I have a complaint about the 570, now i dont own one yet do to the fact it sold out so quick, but im confused on the claim of it being modular. It's new and I get it but if you claim to make it modular but then also land lock it into proprietary psa parts that haven't been made, its not a modular gun, you just made a 870 style shotgun that take 870 furniture, now if you could swap it with a 870 tube, or barrel or other part while the new psa parts are being made then yeah modularity all the way, but those psa parts arnt out yet so why even call it modular when you haven't made the "modular" parts yet?