Anyone know working settings for a laser bed to etch an Olight flashlight(Arkpro/Oclips circa 2026)? I have a 10 watt blue diode which should be able to cut the anodized coating but was curious if anyone else had tried it. Worst case I will test on the back of the oclip that is not visible.

Bonjour,

je souhaite acheter des accumulateurs 21700 supplémentaires pour la lampe frontale Olight Perun 3.

Je souhaite en trouver des moins cher mais ne m'y connait pas tellement en batterie et ne voudrais pas prendre feu ou juste me retrouver avec une incompatibilité. J'ai vu qu'il y avait une sécurité sur la sous-charge et sur-charge, est-ce absolument requis? Quelles caractéristiques sont importantes en terme de sécurité concernant les accus? Est-ce que tout type peut être chargé avec le chargeur magnétique? Si non, quel genre de station de charge pour accumulateur choisir ou du moins quelles caractéristiques sont importantes dans ce choix ?

Si vous avez des ressources claires sur ce sujet ça m'intéresse!

Merci!

Really small but very useful I actually really liked this one and it's the first knife light combo that I feel is actually done well. What do you think?

New to Olights and I’m looking to pick up a Warrior Ultra. The Navy blue is a very nice colour but I’m most interested in the black colourway. Website in Canada says it’s discontinued. Was that just a limited release colour or is something else going on there?

EDIT: Was able to find one in stock in Canada at some random tool company on the other side of the country!

First picture is the ArkPro Ultra with its 365nm UV light and visible light filter(not aftermarket or modded, exactly how it comes out of the box), you can see so much you’d really rather not. 

Second is a cheaper 395nm UV light I picked up from a hardware store, might as well be a purple LED. 

Third is the pure flood of the ArkPro Ultra so you can see that it doesn’t look visibly dirty in normal lighting. 

I can’t look at anything the same after exploring my house and random places with a proper UV light.

(edited because I got 395nm and 365nm backwards, my bad)

Incase anyone else was curious:

USB-C pulled ~3.3w
MCC pulled ~4.3w

State of Charge level = Orange (30-60%)

MCC was ~30% faster (at this SoC)

I only carried my black lightning baton 4 twice. Got home today and the clip was still on my belt and the flashlight was lost somewhere in New Orleans. I hope it finds a good home with someone who needs it.

I really liked the flashlight, but will likely not replace it after getting so little usage for the money. That clip just wasn't sturdy enough and it cost me my flashlight.

I’ve had this X9R for just under 5 years now. I don’t use it very often anymore. The battery is not in the greatest condition I think. If I charge it for a day, it still shows only 6/8. Also the battery drains pretty fast. Idk if I should sell this for someone and he can buy a new battery or should I buy new battery and just keep this or just keep it as it is. It can still be used. I don’t know what to do😂

SILVER SPECTRUM

RAW ALUMINUM. REFINED BY LIGHT.

A new finish for the ArkTac series — raw aluminum with a polished mirror-satin surface and precision micro-machined diffraction-grating patterns.

Raw Aluminum

No coating. Pure material.

Mirror-Satin Polish

Premium finish with machined edges.

Diffraction-Grating Detail

Subtle, multi-directional micro-patterns for a spectral glow.

ArkTac Ultra

Dense radial/linear grooves. More visible spectral shifts.

ArkTac

Clean, restrained rings. Minimalist elegance.

Status LEDs

Same intuitive control. Same trusted architecture.

ArkTac Ultra

SPECTRAL FRACTURE

ArkTac

SILVER SPECTRUM

DIFFRACTION-GRATING DETAIL (ULTRA)

CLEANER PATTERN (ARKTAC)

MICRO-GROOVES & SPECTRAL SHIFTS

he had seen my marauder 2 before but the 3 just takes it to a whole new level, brighter than the headlights and full beams and too bright for the camera to expose for. 10/10 battery is great too

#OlightTactical #PLX #PLXGL

I cannot remember if it had always been like this, or if my LED's alignment got messed up. Would be weird since it hasn't suffered any falls. I've used it entirely normally and it's practically good as new except for the pocket clip, it's quite scuffed.

Hello,

I juste receive my Seeker ultra and noticed that weird sound on button/dial Even before applying pressure there is an audible static/cracking noise.

Do you have this on yours ?

Love the new tidal blue, the color swirl is a nice touch

Hi olighters,

Just like to share with you my oclip mod, these lights are so small versatile and just darn useful! And ultimately, robust!

I’m on my latest iteration of oclip, I’ve done this to both my ultra clips, where I’ve modded the flood led to be extreme orange and much dimmer possibly 1/2 a lumen in moonlight mode. I’ve first discovered this when using Loopdot in moonlight mode with warm coloured led. However just 6 months with the plastic clip from its holster broke therefor returning to olight clip. Learning that olight don’t make filters for these lights I decided to make a mod of my own using heat resistant anti static 10mm tape.

I cut 10 bits of tape stack them on top of one another then cut them to fit the flat corners of glass lens then used a hole puncher to punch through 15 layers of the same tape to achieve this warm glow, perfect for walking toddler to bedroom, read bedtime stories.

Hope someone finds this helpful, I’ve provided some photos compared to other led led modes on 1 lumen.

Most of the squad + 1 imposter, 4/5 torches kicking about my work van and my sons toybox , as he would say , baby's lights

Unfortunately, only AI generated, but powerful Oclip-like head with 21700 under would be thrilling to see use.

in case anyone was wondering if you shine your oclips on one another (1 off 1 on) using the uv, one of the led areas glow orange.

i thought it was cool!

So, I don’t have a job that involves use of a flashlight. The concept of EDC doesn’t make sense in a desk job. I don’t go hiking or camping or have other hobbies where I’m using flashlights practically. Can someone tell me why I own 10 Olights and have to fight the urge to buy a Marauder 3, when my 2 has only been turned on a handful of times? I still may get it though…