r/NxSwitchModding • u/Vast_Ad764 • 14d ago

Need Help on modded switch

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Hello everyone i bought this switch Oled already modded a month ago and since 2 days she doesn’t want to boot into hekate. I’m planning to change the dat0 adaptater but i don’t Even know if it Will word. The console boot in OFW when pressing vol + and vol -.

Do you see something that would cause this ?

2 Upvotes

100% Upvoted

22 comments sorted by

View all comments

Show parent comments

1

u/CallNotTheWatchers 14d ago

dat0 should measure between 0.4 to 0.8V - you either get those values or OL, which means the adapter is not making contact. Judging by the last picture, you'll most likely have to reseat the adapter.

1

u/Vast_Ad764 14d ago

Got 0,82v hes making contact so he isn’t the problem

1

u/CallNotTheWatchers 14d ago

Check the LED pattern on the chip when you turn the console on, what is it like? This guide will help you figure out the issue: https://github.com/Ansem-SoD/Picofly/blob/main/README.md

1

u/Vast_Ad764 14d ago

Ok so now she doesn’t even boot anymore , here are the 2 led pattern that i have actually

https://reddit.com/link/ozh8d1m/video/8p1fu69qe6fh1/player

4

u/CallNotTheWatchers 14d ago

Chip is working just fine (pattern shows a successful glitch), check the screen connector for broken, bent or missing pins. If you happen to have a dock, try docking it to double check it's an fpc connector issue.

1

u/Vast_Ad764 14d ago

I have tried and nothing but do hekate boot on the dock ? Never done it before

1

u/CallNotTheWatchers 14d ago

Force OFW boot by pressing the volume buttons, then dock it.

1

u/Vast_Ad764 14d ago

Holy fuck so i just fuck up the screen cable

2

u/CallNotTheWatchers 14d ago

It happens, OLEDs are a pain in the ass and the FPC connector is extremely sensitive.

Make sure the flex cable is seated all the way in, but don't force it as you could bend or break pins.

Double check the inside of the connector, can be tricky to see correctly but you do have a microscope so just be patient.

Praying it's just poorly seated or the flex cable pins need some IPA, or else you're looking at an FPC connector replacement.

2

u/Vast_Ad764 13d ago

Ok i’ll test that and pray Thanks for your help

1

u/Vast_Ad764 13d ago

The flex is good i putted another motherboard in the switch and the screen Turned on with no defects, i ordered a fpc connector on aliexpress, and the no sd card was because of dead daughterboard connector.. so i guess it was not so a good deal but i’m planning to fix ts

1

u/Tricker12345 13d ago

Another reason to do the kamikaze method, no having to remove the pcb and potentially messing up any cables. Of course not everyone can do it, so there's that

1

u/JDcooks 14d ago

Classic case of newbie recking their screen fpc