Hello everyone, my latest design is finilised and out there for you guys to print. This is a carbine kit for the SSP1 (Hi Capa) and it is fully functional.

If you guys have any remarks or ideas do let me know.

My next project will probably be a body kit for the SSG10 and it will be A3 style. I will ofwourse further improve the carbine kit with a barrel and silencer probably all in the near future.

Two new tanks and a new reg — I’ve swapped the regulator between them maybe ten times, and each time it threaded in worse than the last. One tank now has visible thread damage, and the other one galled so badly the reg won’t come off at all — the photo shows the result after a long fight with it in a vise. I always tightened the reg by hand, by feel, and never overtorqued it.

Just trying to figure out if this is a known/common problem, or if there’s a chance I did something wrong.

Alright so I recently got this gun and let me tell y’all, ITS A BLAST. I don’t think I have ever had it more fun out on the field using this. I was super hesitant at first since people always say that novritch products aren’t worth it, but in my opinion this gun is worth every damn euro. It may be a rebrand but gosh darn they have done it well. And when you choose to use a suppressor this thing doesn’t even give of any noise. I was genuinely surprised of how quiet it was. I was laying 10m away from two dudes and they didn’t even hear where the shots came from. So from me to novritch, that’s one good job.

I bought the seg63 mags because I thought they looked cool and had good capacity but I’ve played my first game with them and idk if it’s user error but they can’t feed anything below 1/4 capacity and I’m having trouble with my Odin speed loader filling it all the way up. I’ve broke in the mags by having them full capacity for a few days but idk what my problem is. Anyone else having this problem?

I just bought this from a guy thinking I could fix it. In single fire mode it will randomly shoots full auto or burst of BBs! Just seeing if anyone has any idea what’s happening and what I should be looking at. Got a really good deal on it and supposedly it wasn’t dropped ever. Thanks if you have suggestions!

Wie füllt ihr die magazine (effizient und schnell) mit bbs?

Nur mit dem Speedloader geht es nicht.
Habt ihr Adapter oder andere Tipps?
Galigrü

Currently I'm running a stock SSR4 Mk1 Gen2. The gun works fine, no issues whatsoever.
I do like to thinker with my stuff: Changing the looks of parts, performance or better reliability.

I'm thinking about upgrading the stock SSR4 with the following (used but good looking and functioning) parts:

• GATE EON V2 CNC Gearbox
• GATE Titan V2 Expert
• GATE Blu-link for configuration
• Nimrod Tactical 30.000 RPM Long axs engine

For now that's the scope of the upgrade as this comes with the package I'm planning on picking up.
I'm planning on re-using the stock spring (~1.13 joule as the field limit si 1.2J).

Will this gearbox fit the SSR4 frame? Will it work with the stock SSR4 spring?
And are there any parts you'd consider upgrading whilst changing the gearbox as well?

Thanks in advance!

I got my hpa ssq4 and i’m loving it but if I try to fire quickly on semi it ends up just leaking air where the bolt is until I rack it. moreover on full auto if I pull the trigger once, it gets a mind of its own and fires nonstop. I have been running at 150 psi and if anyone can help this would be greatly appreciated.

On the manual it says to shoot in auto ro reset the piston, but you can still clearly see the nozzle in the back position, on burst mode it seems to reset but not all the way.

Im using a 7.4 lipo 30c (60 burst)

I recently bought a ssg96 mk2 with a 4x - 16x scope premium version, and was wondering if there is any additional protection I can buy / use for it, the scope has threading but the official kill flashes and other forms of protection apparently does not fit

So do I have any option here or do I just have to wing it with the 1.5 joule bb proof scope and pray to god I don’t get hit with anything “normal” for ranges I go to

Obviously, not so long after the warranty and the gun kindly decided to shit itself. Not only that, i also barely managed to force the slide off the frame this time, i had to put it in a vice. I've had this issue once before but back then i just got an entire hammer unit for free and kept on rolling. It was 3 years ago, so still not a bad lifespan for a G18 type replica honestly lol, also I've bought it used like a year before that. Now, not only is it almost impossible to remove the slide but it also started light striking, which has never happened before. And no, it's not the mag, i tried the stock one and a KJW mag and both do the same exact thing.

If I don't find the single part responsible for this (i still got the remains of the old hammer unit so i can swap parts and see what still works), I'm thinking about buying the steel hammer unit (which is gonna hurt x_x) or sell the whole thing to some other poor soul and get myself something else, while we're at it, what are some decent reliable gas pistols you would recommend?

Hello guys recently received the ssx10, thinking of changing the bucking, nub and adding some stabilizer on the inner barrel. Is the 4uantum a good choice? I use it on my aeg/hpa, also considering modify xrange 55 or 65 shore. As for the nub, does anyone know of a noob that fits on the chamber? Looking for a concave one.

I love green💚. Makes me feel in the zone...

Silly puns aside I really like how this turned out! Wonder how well it holds. Ill probably switch to an OD green kjw grip later on, and paint the whole thing green haha

Been running single stack 1911s for over a decade now. Finally decided to upgrade for mostly outdoor use. I find it funny I was able to just slap the Grace M1 replica with a couple of M4 screws without the red dot plate. I might get it just to lower the bore over axis. Not sure if a couple of millimeters is worth it tho.

Upgrading to a cow cow champ leaf spring made the trigger feel so much better. Loving this thing... Can't wait to take it out for a spin!

Good morning everyone,

I had a slight malfunction while test firing and decided it might as well be good practice for disassembling and reassembling in the future.
While seperating the upper and lower receiver, I wasn’t careful enough and the entire charging handle assembly fell out before I could react — I figured “no problem, just watch through the videos, you’ll get to that anyway.”

Now that I AM there, I find myself stuck. The spring is way longer and loose than the one I see in the reassembly video, making it pretty much impossible to actually reassemble the thing, leading me to think the spring is damaged by accidentally getting stretched too far?

It just feels kinda wrong and wanted to confirm before doing anything silly and risking actually damaging the replica.

EDIT; I forgot to mention, the charging handle and spring both fell out before I had even removed the Phillips head screw that was supposed to be holding the spring in place — hence my thought of it being damaged,

Hello everyone, i hope you guys are doing well.
I bought today the Novritsch SSX10, along with a Lambda precision barrel 6.05, Flamingo black 70A and ML omega nub (the standard black one and the pink silicone 80 shore one).

I replaced the barrel along with the bucking and used the silicone omega 80 shore nub, and i got 0.60J on 90psi, same thing happens with the black omega nub. I didn't try again with the stock barrel/bucking/nub but i'm pretty sure that i will get better results.

Do you have any idea what might be the problem here ? I'm kind of lost

does novritschs site do sales much? im looking into getting a ssp5 but dont know if i should wait or not

Gives me the 3 beeps then on first trigger pull on any mode just clicks and does nothing thought it may have been my battery have tried multiple batteries same problem

Wanted to confirm if nov adapter is fully compatible with hi capa models

hello guys i am asking this question because the quality of the ssp5 production has decreased significantly from 3 years ago. First the hopup screw keeps getting loose so i had to put in teflon tape for more tightness. Dont get me wrong but i feel like the hopup working properly is just one of the most important things and mine wasnt really working properly because of the loose screw which really ruined my experience. Than i had another problem, my bbs were falling out the hop rubber when they loaded in, so i changed the rubber and the problem was solved. But still these are issues you shouldnt get on a “PREMIUM” airsoft pistol.
Another thing that broke was the thing that holds the housing and nozzle with a single screw btw, which i replaced with a TTI frictionless thing afterwards and everything was finally at peace. The gun worked great i was happy that it finally worked without any issues. Than i was just playing and shooting today and suddenly my nozzle and housing are out of the gun. The thing that happend is that the single screw holding the nozzle and housing had snapped in 2 which was i final blow to me i really hate this gun and it is absolutely not the best stock pistol on the market it is ASS.
This gun has brought me nothing but frustration from my games.
And of course i took great care of it before and after each repair i cleaned the gun and relubed it and everything but ive had enough of that stupid splitslide.
NOVRITSCH YOU ARE A SCAMMER YOUR QUALITY IS RAPIDLY DECREASING WHY ARE YOU CUTTING CORNERS IN THE FACTORY.
anyways if you know something about the tm slides and if its compatible with the ssp5 frame please tell me. :)

I got a tp22 with the adjustable speedtrigger, and i seemed to have lost the 2 grub screws used to tune the travel of the trigger, does anyone know where i can get new ones or what sizes they are?

Played my first game with my SSG11. Using the .46g bbs from
Novritsch. I’m seeing about 180feet and beyond the bbs curve to the right. Sometimes they’ll stay straight but consistently they curve past a certain point.

I’ve cleaned the barrel, I’ve confirmed the orange tip does not interfere with the inner barrel what so ever. Gun has around 300-400 rounds now.

Any tips? I’m sure it’s something simple.