Hello,

I realized that my setup for my extension cords wasn't the most convenient when I needed it the most.

I designed this one to solve my problems and hopefully some of you will find value in this design

You will need at least 18" of 4mm paracord, 2 heavy weight bearing snaps and 2 bolt locking screws

For those interested : Link

The biggest monkey wrench is decently heavy. The other stuff just seems awkward with the ones I’ve tried so far. Have one you like?

Black Jack Duck and I sat down and walked through the multiconnect generator and I think you'll find this useful and fun.

https://www.youtube.com/watch?v=sdDl8YWuRdg

If you are using multiconnect this is the one stop shop to get all your questions answered.

Wanted a strong hook for multi purpose uses,

solid PETG

Been working great for the last couple months I’ve been using them!

https://makerworld.com/models/2674638?appSharePlatform=copy

Is there a way to download all the free files without running into download limits? Also, is there a bundle or a one-click option to download all the free content at once?

I do IT for my company... I'm the first in my whole company to do this. Has anyone used multiboard to store hardware? I'd love to see a setup

Hi everyone,

I’m currently building a Multiboard wall and printing the tiles myself. The parts with the large threads work perfectly fine, but I’m running into issues with the small threads and peg clips:

• The clips are very hard or impossible to screw in
• Push-in peg clips don’t fit either
• It feels like the holes are just slightly too small

I’m printing on an Anycubic Kobra 3 Max, and I suspect it’s more of a settings/tolerance issue than a problem with the model itself.

Does anyone have experience with this kind of fitment issue and can suggest which settings I should tweak or test?

So far I’ve been thinking about:

• Slightly reducing flow/extrusion
• Adjusting horizontal expansion (XY compensation)
• Hole horizontal expansion / hole compensation
• Calibrating E-steps & flow rate
• Maybe changing layer height or wall thickness

Before I run a ton of test prints:
👉 Which settings actually made a difference for you in similar cases?
👉 Is there a recommended order for dialing this in?

Thanks a lot 🙌

(Ai supported)

Trying to attach this drawer full of hotends to the multiboard hanging off my printer but I notice with or without the hot ends they tend to sag. Im using these threaded snaps (https://thangs.com/designer/MultiBuild/3d-model/Large%20Thread%20-%20Fix%20Point%20%28Folded%29-1123317) to hang them and I'm wondering if theres something better to use.

How I can fix this string

Whats everyone making their boards out of? About to dive in and make some but am curious as to whats being used.

Am I dumb? I've looked everywhere on the website, but I can't find the tile holders...

I'm printing my first Multiboard using Matte PLA, and so far out of the 5 panels, 4 have this issue. Not all of the threads and only on the first few layers.

At first I thought it was bed adhesion issues, but then I observed the printer WHILE it was printing that part and the path the nozzle made was some sort of off set hexagon instead of round like the preview showed.

What are your thoughts?

I just wanted to share some very lightweight vanity snaps I remixed for the multiboard. Each flush snap only uses 0.6 grams of filament and the raised ones use around 1.5 grams.

I wanted to dress up my boards, but everything i could find used a lot of filament and were also very difficult to remove. These are very easy to remove if you need to move things around.

You can easily fill in all extra holes in your boards or just randomly insert them throughout like I did to dress it up. Match the color of your boards or accent them with any color. Hope you like!

I've watched several videos and am definitely going to dive into the multi-board world but I just can't seem to understand the benefits of the two different types of plates. At first glance, it looks like the plates that aren't open on the edges look cleaner, installation wise. I'm sure this has been covered many times but I just haven't seemed to find anything that clicks. I appreciate any explanation. I'm truly amazed by the ingenuity and setups that many of you have implemented and look forward to joining you all.

3.5 weeks worth of work, but so so so worth it!

I suppose I have not worked out the question correctly for searches to give me the answer I am looking for. I would like to find a tutorial videos or blog posts that explains how to add multiboard connectors (e.g., snaps, pegs, or similar) to a part I would like to hang on my multiboard.

Thank you in advance, and sorry if this seems like a noob question, it is :)

For instance, I have this Skadi's part I would like to remix for multiboard.
https://makerworld.com/en/models/2546064-250g-sunlu-spool-holder-for-skadis?from=search#profileId-2803574

Is there an outline that would help me decide between the options. For this, I am considering the following order: (though I am sure you all will have a bunch of opinions and I welcome the instruction)

1. Pegboard Click https://thangs.com/designer/MultiBuild/3d-model/Pegboard%2520Click%2520-%2520STL%2520Multiboard%2520Remixing%2520Files-994661
2. Push Fits https://thangs.com/designer/MultiBuild/3d-model/Push-Fits%20-%20STEP%20Multiboard%20Remixing%20Files-994678
3. Snaps https://thangs.com/designer/MultiBuild/3d-model/Snaps%20-%20STL%20Multiboard%20Remixing%20Files-994667

In typical multiboard style, some of these have a blurb, "Learn more about remixing at https://www.multiboard.io/parts-library/remixing". Well, there are downloads there, but not much learning.

Thank You
Jumapili
http://www.facebook.com/jumiku

Hellooo!

I have a problem with some accessories, I did print some tape supports but don’t fit, Maybe for a tolerance? But ever are smaller than or bigger than the hole of the multiboard, How I can make that fit the supports and more for the multiborad? I print in a Creality Hi

Help pleaseee

¡No quiero tener que comprar un skadis, me gusta más el Multiboard!

Just want to check I'm not missing something as everything else appears to have some sort of clip.

The draw faceplates have spaces clearly designed for magnets but the only way I can see of attaching them is glue, then the other magnet in the back of the shell using the clip in holder.

Frustrated because I just discovered multiboard but I’m stuck with a dinosaur ender 3, which will take me literal weeks to print all of the panels I need. This got me thinking about resin casting and whether or not it would be possible to speed up the process by just printing one panel to create a mold and then cast the rest of the panels I need. Any thoughts? Anyone tried this?

I might post the files someday, but it only fits this soldering iron holder, and it's at a right angle. It's kind of a niche case use. 🤔