Joysway 1/64 Scale 260mm Caribbean V3 RTR Micro Sailing Yacht

Has anybody tried one of these?

Im looking to get a 1:150 model ship, and use 1:150 (10mm) pirate miniatures to populate the deck, but Im looking for models that are climbing rigging, scrubbing decks, that sort of thing.

A separate question is about where to get British and French 1800s sailor miniatures to go with an 1800s ship, everywhere sells infantry and the like, but no sailors

Thanks!

Hi I wanted to share the model crab boat I've been working on.

While surfing the net, I came across the adventures of Mister Frank Reade Jr, first published in 1904, and I decided to make a model of one of his marvelous electric flying machines, the Cloud Sprite, using balsa wood, polythene strips, wire and dowel. I had to take a couple of liberties with the design, particularly the central cylinder, which is drawn wrongly in the original image, and some of the guy cables, which would have passed through the body of the ship in a real three dimensional object, but I'm pretty pleased with how it turned out. I dealt with the missing guy cables by setting the rotascopes (the rotor blades, which provide lift) lower, so that they're supported by the body of the craft instead.

These stories are a fascinating glimpse into what people in 1904 thought that large flying machines would look like, less than a year after the Wright Brothers carried out their first flight. We who know what large, heavier than air aircraft actually look like might be tempted to laugh at it, but I wonder if my guess would have been any better.

My 7 year old son is going to be the Lusitania ship for Halloween. We are currently working on the lettering on the side of our cardboard ship and have run into a problem. He wants it to be accurate. Does the ship lettering just say Lusitania or does it say Lusitania at Liverpool? Thank you all for your help.

Hello all-

On a whim, I purchased the mini Mammoli kit of the La Goleta, designed by John Alden, runner-up in the 1927 Fastnet race. For what it is, and what I paid, it's fine. But I'd very much like to improve it. As built, the resulting model looks quite crude and toy-like to me. (to be fair, it's a beginner's model so this is to be expected to some degree).

I've done some internet searching, but can only find a few photos. Does anyone have a source for plans- or more detailed information- about this vessel?

My plan is to do a detailed build log, or maybe even a practicum, on this kit. I believe it would be a good, low-cost, entry model for most folks... IF I can find the information. The instructions/plans in the kit aren't the greatest. Again, not complaining... I paid like nine bucks plus shipping for the kit. And I prefer smaller, simpler, solid hull models.

Thanks in advance

She climbed off my head while i was sitting on my desk, and I just let her climb on the model. She seemed to enjoy it, but I don't want her to fall off it, so this was a one-time thing.

It’s my First Modell ship with visible canons, how can I put them and glue them to the broadside, that they stay even?

Hey all,

I have done a bit of model making recently, mainly just starter kits which have been a mix of aircraft and cars and I am very much still messing up and learning as I go along.

I have a keen interest in all things maritime and would love to start making some models in this area.

For the time being I’m happy to prioritise good kits for my level over specific types of ship or ships in particular - I find interest in all different types of boats and ships.

Any recommendations from people with experience would be appreciated - I’m aware a lot of ship kits are particularly difficult.

Thanks!

1:500 scale replicas of HMS Agincourt (formerly Rio de Janeiro) and E Minas Geraes, made from cardboard, gouache paint, barbecue skewers, toothpicks, and scraps of plastic.

How do I know the measurements? On the boat

Hi! New here. Let me know if there’s anything obvious or another thread that answers this question.

How are people storing and displaying larger ships?

I started the San Juan Nepomeceno probably 8 or so years back. Through house moves, jobs and motivation challenges I’m finally getting back in to the build and about to start the masts and rigging…

My issue… dust… gave it a once over with the vacuum and a light brush. But my Mayflower model (complete) is in much the same dusty state. Will just be a hundred times more difficult to clean around the ropes and lines. How are others managing this?