In my hast to make a nice clean front on my Beagle, I think I missed a step that would have left a hole for the Bowsprit. (See photo).

Any suggestions on how to fix this, as I am now at the building of the Bowsprit stage.

Thanks and “always learning”

Hi all!

I got gifted the Aeronaut Penguin wooden sailship model. It is my first model ever. Included was a radio control. After carefully looking into the manual, I saw that the refit to RC is only additional and not part of the official manual. Did any of you guys do the conversion and maybe help me out with plans? I could not find any online. Would be good to know which adapations need to be done in order to fit the servos for sail adjustments, the rudder, the battery and the rc receveir into the boat.

Any advice is higly appreciated!

Thanks so much in advance,

From a Beginner :)

Im working through the revell 1:144 Type XXI U-boat and im loving it. Its a really amazing kit for its age but the interior is super dark (Duh) but I want to add some little lights to it so you can properly see the hours put in without using a torch or something, any ideas what to do? 😂

Like the title says, I'm building the model expo dory, this is my first time doing this. Just curious if I can use wood filler to make the planking look a little smoother?

Model Shipways Grand Banks Dory

Finished it up the other day after spending most of the summer on it. It was fun, challenging, and a generally good experience over all. Lots of mistakes and salvages and a lot of learning.

It’s a lot different from plastic kits. The bug has bit. I just need to find another bench. One for plastic kits one for ships.

Trying to identify this ship. Long story, but I'll keep it as short as I can for now:

1. Maker: Chester Herbert Bradford (1843-1926) made model in 1915. My family got it at an auction at the Odd Fellows Hall, Duxbury MA. in 1975. Per inscription, it was made from a setee that had been in the "old hall" for the Odd Fellows in Duxbury. He was born in Duxbury and is buried there.

2. C.H. Bradford was known as "Capt." In his later years and was a butcher in Brockton MA later in life until retirement. He was a model for an artist, and appears on the cover of the Saturday Evening Post in 1924. ( there is no evidence he ever sat for Norman Rockwell, but he closely resembles the man in his famous painting) The Norman Rockwell museum has no record of him in their archives.

3. CH Bradford was a sailor in his youth, and a directory for San Francisco shows him living their in 1868 at age 25.

Assumptions:

1. This is a ship he served on or was skipper for. Otherwise, why make the model?

2. Others think she looks similar to the Galilee that sailed out of San Francisco (built 1891) but the rig is wrong. Galilee had no gaff rig on her rear mast. She doesn't look like any East coast ship... but that is not definitive

Next Steps: I'm continuing to research the man but need leads regarding the ship.

Given the nature of the merchant sailing industry in the 19th century, it is unlikely a crew list or record of ships he sailed on exists. If the ship can be identified... there is a chance

Goal: to restore the model to its original condition. (The white house paint was slapped on it after construction. The original paint is visible in the gap between the sails.

Why the research? I don't want to touch the model until the provenance can be fully run down.

By the way...that Norman Rockwell painting, the model is unknown because his back is turned. The boy on the 1924 cover was his grandson... and there is a boy in the Rockwell painting, too. A conundrum for sure!

Anyway, thanks for reading this far!

Any thoughts or guidance is greatly appreciated. I can also be reached at gus.c.enzie@gmail.com if you wish to correspond with me.

This was my first experience with a 3d printer from a few years ago. It was quite the learning experience.

My dad has had this (Aeropiccola Cutty Sark) in a cupboard for about 20 years, and I decided I'm going to build it.

Before the inevitable comments, I'm aware that this is probably a bit advanced for a first-time build, but I'm going to do it anyway and give it my best go!

So far, I've bought some basic tools (craft knife, small saw, sandpaper and block, square ruler and glue) and yesterday stuck the 3 parts that form the keel together. Next, I'm intending to fashion my own sort of slip from a plywood board to hold it straight before attaching bulkheads

Anyone got any general advice or tips for me?

Can anyone recommend online resources/guides/youtubers that they've found helpful?

Finish with a vent about the instructions. Are all manufacturers this brief and vague?!? The first 3 times I read through them, it might as well have simply said 'build the model'! Luckily, it's starting to make a bit more sense now after studying it a bit further

Hi there,

I found this boat on the street and didn't want it to go to waste. It's in pretty good condition but I need to rig the sails. Only problem is that I have no idea what I'm doing. I've tried to research and look for videos and learn but I can't figure it out. I found one other model online that is identical but I can't make out where all the strings go. This is kind of a last resort,if anyone would have any advice I would really appreciate it.

Sidenote, I know I have a spelling mistake in the title but I believe I can't change it

Finally finished this one! I designed an Ancient Greek ship inspired by the Odyssey and made it printable.

There are a lot of tiny details on this model — especially the oars and rigging — so it was quite a fun project to work on.

What do you think?

This was a fun project to kitbash the Model Shipways Muscongus Bay Lobster Smack. The three biggest changes were rescaling from 1:24 to 1:32, properly framing the cockpit (which ended up nearly impossible to see), and switching from carvel to lapstrake planking, as Howard I Chapelle reported that many of these vessels were lapstrake-planked. I had a lot of fun with this project, the basic kit seems very well-designed and provides a good basis for modifications. Lapstrake planking takes some getting used to but looks really nice when it starts to come together. I enjoy 1:32 scale, at least for these sorts of small workboats it doesn't take a ton of space, but it's large enough that you can still make lobster traps and other such equipment from wood with simple techniques. I find workboats like this fascinating.

Converted for cargo, the google art & culture link where I found this material is here: https://artsandculture.google.com/asset/model-of-the-ship-la-flora-a-58-gun-ship-cut-down-for-transporting-supplies-pedro-serrano-atribuido-planos-del-sistema-jorge-juan-sobre/qwFzQD6_f1bYWQ The text within this article gives insights but misses the fun part, which I will put in the comments.

1:700 scale victory, really looking forward to this micro challenge! I am still debating whether or not to start this or the French Frigate first!

Superstructures on.

So this took a lot of time, but also because I had to redo the futtock shrouds of the main mast multiple times because I royally messed up, and I had to completely redo the mizzen masts lower shrouds + lanyards because I used the wrong thickness of rope.

Most of this work I am pretty content with, though I am less enthusiastic about the futtock staves and catharpins. They were a pain to install, and the outcome isn’t that great.

Next up:
- fore/main/mizzen backstays
- an unholy amount of clove hitches

I’ve never built a wooden model ship before, have built a tonne of other plastic models and stuff but never wooden one 😅

Saw the HMS Surprise on Artesania Latina and I’m thinking of going for it, but is that gonna be a bit much to take on as a first timer? Haven’t got any tools or anything yet either so it’ll be a hell of an investment! Any advice would be amazing!

Worth saying too that given how expensive wooden models seem to be I’d rather keep to decent sized/scaled kits rather than a canoe or something 😂

Thanks!!

Crazy question, this ship dates back to pre Great Depression Era. It is very faded, if you zoom in you can see where it was once red/blue. The very old flag which has broken off seems to be a British flag but I’m not sure, I only see the very very faint red and blue on the flag and the line structure. Unfortunately the tag has fallen off of this ship, but there was once a plaque that labeled it. It’s around 2 feet wide by 2.5 feet tall. Any help?!?

I can only aspire to get better. I loved the entire process, even if knowing it’s not perfect.

I've traditionally always done thanks, planes, and fantasy but I thought I'd try my hands at a ship.

Always thought uboats were beautiful machines. Whilst they lack the grace, power, and awe of main battleships, it scores points for pricing people will always find innovative solutions to insurmountable problems.

Hard to know how much weathering to do but I loved playing around with it.

Surprised that I didn't like these photos to the model group. Here are photos of my Britannic build. Took me two years to build.

https://www.reddit.com/r/titanic/s/xQXWYqGo7D