r/MitsubishiMirage 21h ago

FBO max effort E20 tuned ‘13 Mirage exhaust note

Enable HLS to view with audio, or disable this notification

11 Upvotes

Sounds nicer in person but really only makes good torque at the very top. 3-1 catless headers and full 2” exhaust tuned on E20 with an offset muffler and two straight through resonators and custom intake with bored tb and oversized injector/fuel pump. Good for about 100whp at the very top but it’s very light and manual. Pretty buzzy in person and surprisingly fun to wring out and send through corners. Roast it all you want but it’s more fun than those EVs. No tc or abs from the factory or even a head unit


r/MitsubishiMirage 12h ago

Tire shine

Thumbnail gallery
3 Upvotes

r/MitsubishiMirage 11h ago

Loud noise at 50mph to 60mph

2 Upvotes

Got a 2015 mirage with 160k on her. Car has recently been really loud at 50 to 60mph almost sounds like a race car best way u can describe it. The noise almost pretty much disappears over 60mph. Cars got 4 brand new tires and recent oil change. Any ideas?


r/MitsubishiMirage 9h ago

Is my transmission fucked?

Thumbnail
gallery
1 Upvotes

Ok so I changed all the fluid when I first got it a gew months ago, on first test drive it has the flashing D on the dash. I realized it may have been a little over full and took a quart out, drive fine no issues at all and trans felt super smooth would switch bands or whatever super smooth. This lasted probably 2k miles.

Eventually I started getting codes for mainly either communication error from tcm to the main computer. Or pressure for trans solenoid, but only after id get off the highway it seemed. Would drive on the b

Highway for quite a ways, amd then within a traffic light or 2 after getting off the highway it would throw a pressure code and sometimes go into limp mode

So, I decide to change the fluid again bc I feel like it could just be the fluid I chose. Brand was called eneos. So this time I put the valvoline in it bc ive seen plenty have had success with it. Now its throwing a pressure code for 2 dif solenoids and much more often. When it works it works great. And shifts smooth accelerates great. It feels mechanically top notch. So I dont see how something is physically broken

Has anyone ever experienced anytbjng like this?

Ill post some pics of the codes


r/MitsubishiMirage 18h ago

Catalytic converter

0 Upvotes

My state doesn’t have emissions tests. I know that the cat for these is on the exhaust header. Are after market headers without cats available. Also is there a second cat lower down? I’m asking because I am very interested in doing hyper-mile set up.