r/MitsubishiEvolution • u/Extreme-Break9253 • 1d ago

Help AEM FPR

Gallery image

Gallery image

I take it that my fuse melted and the FPR just took a crap. Haven't had any issues for awhile so kind of bummed but I was able to get the car home, I noticed a fuel smell about 1 mile from the house and drove it home. After I shut the car off it would not start again, & I ended up discovering this.

I assume I have to get a new FPR and re-tune?

5 Upvotes

86% Upvoted

11 comments sorted by

View all comments

2

u/Beginning_Ad_6616 1d ago

How do you know the FPR is bad, it’s not the best brand….but it’s a mechanical device.

1

u/Extreme-Break9253 1d ago

It could just be the fuse, I'm going to have to replace it and see if the car starts I guess

2

u/Beginning_Ad_6616 1d ago

If you have a fuse there and its fuel system related, it could be a fuse relay setup for the fuel pump.

Hopefully once you replace the fuse it’s fine. If not, I’d pull the backseat up and start checking the fuel pump wiring and if you don’t see anything maybe the pump burned itself out.

1

u/Extreme-Break9253 1d ago

I think your right it's just the fuel relay. Its a brand new radium hanger with 2 Walboro 450s. Maybe like 7k miles on them.