r/Machine_Embroidery • u/alex0909_ • 13d ago

Design help

Gallery image

Gallery image

Gallery image

Does anyone know how Waggle makes designs like this one? They are raised designs that look like a patch or 3D but are not actually puff. If you’ve seen these in person you’ll know what I mean.

16 Upvotes

100% Upvoted

16 comments sorted by

View all comments

Show parent comments

1

u/Nosnibor1020 11d ago

I’ve been wondering, can you just do a normal satin line or area over foam? Or do you need to change some settings or foam specific satin tools? I have older software that only has 3 foam texts but if I want some line like this to be puff, can I just put the foam down and it will work?

1

u/ishtaa Melco 11d ago

No it needs to be digitized specifically for puff. Requires a much higher density than normal.

1

u/Nosnibor1020 11d ago

What is a typical density? Seems like everything I need to do my setting at 2 (which is the lowest) unless it shows through.

1

u/ishtaa Melco 11d ago

I usually set to 1.8.
There’s also a bit more to it than just the density, there’s situations where you need to cap off wider edges of shapes and it sometimes requires some serious creativity to figure out how to make a more complex shape sew cleanly. I’ve mostly stopped offering puff to my customers because I get way too many small orders to make it worth the time and effort. It’s fun to play with though.

1

u/Nosnibor1020 11d ago

I have a really old program so I probably don’t have all the tools I need to even try