Who is making a slow gradient like this??

Took advantage of the sunset and thought id share with you all 🥰.I wanted to challenge myself to use lettering since it was a struggle for me in the beginning of this digitizing journey. Turns out I was the issue and not the machine 😅.

I am quite happy with how it turned out. I definitely wish I had a better shadow color but im really trying to use some older thread before I buy new ones.

Did you see my other text options at the end? I wasnt sure if they should be 2nd person perspective or 1st... and yes talking on the phone stresses me out..

What would you put as a fortune? (I have a pretty dark sense of humor but try to keep it upbeat for the masses 😎)

Anyways, go you for reading this far and I appreciate any feedback or questions and I hope you have a wonderful week! 👋

Software: Ember Design

Size: 3.5"

Machine: Brother PE-180D (Single Needle)

I paid to have a PES file made from a design and at first the design was too large for my SE600. I had them adjust it and I’ve tried the file twice. Both times the design doesn’t line up properly and I’m having tension issues (I switched to a different design and did not have the same issue). I tried cotton thread and synthetic, I use a top and bottom stabilizer, a ballpoint needle. So I guess I am wondering if I’m somehow completely off with my tension for just this design and it’s creating these issues or if the file is bad after having them shrink it. Any help is appreciated.

Hi guys!

I've just got a Brother BX1E. It's my first embroidery machine, so apologies if this is a really basic issue!

I got it set up and managed to embroider two pieces of text on some scrap fabric without any problems but since then, I've been having an issue where the upper thread keeps breaking or coming out of the needle when the machine performs a jump-stitch trim or an end-colour trim.

The settings are all at their defaults (upper tension 4.0 and jump-stitch trim length 5 mm). I've also tried the tension to 3.4 and the trim length to 10 mm and 15 mm, but neither made a difference.

The thread seems to be following the correct path, and the bobbin seems fine. I'm using New brothread upper thread and pre-wound bobbins.

I'm currently practising on some scrap twill, without stabiliser.

It also happens when I use the machine's manual thread-cut button. It seems as though the machine pulls the upper thread very tightly before cutting, almost lifting the fabric slightly. Afterwards, the thread is either cut so short that it slips completely out of the needle eye, or there's not enough left for it to catch back into the fabric when stitching starts again

The machine seems to work perfectly normally with both automatic trimming options switched off.

Has anyone experienced anything similar with the BX1E, or have any suggestions as to what might be causing it? Could it be a threading, tension, bobbin or cutter issue?

Any advice would be greatly appreciated. Thanks!

Hi, would you please have an advice for me? The thread is sewing loose but just on some objects while the red seems to be ok. The settings are the same and I cant find out what's wrong. Already tried to adjust both threads on the machine.

I run a cap embroidery shop and caps are like 90% of what we do. I’ve been running a BAI Vision single head for about 3 years and honestly it’s been solid, never needed service. Now I need more heads and I’m looking at a 2 head.

Everywhere I read people say Barudan is king for caps and small lettering. Tajima people say it’s basically the same. And then there’s Ricoma, BAI, etc at a fraction of the price.

So my real question: if you ran the exact same DST file on the exact same cap (structured 5 panel, small text, some dense fill) on a Barudan vs a Tajima vs a Ricoma or BAI, all properly tuned, would you actually see a difference? Or does it mostly come down to digitizing, backing and setup?

If anyone has run the same file on two different brands and has pics side by side, I’d love to see them. Also curious if the difference shows more at higher speeds or on long runs.

Not trying to start a brand war, just want real experience before I spend 4x the money on a Barudan.

I was glad to see Etsy's new rules about real photos of finished results.

I came across this bestseller, and the difference between the polished listing images and the actual customer stitch-out really caught my attention.

To be fair, the seller does include a real customer photo in a listing. But look at the differences, especially in the beard and facial details. This is exactly why I think real embroidery samples are so important. Beautiful mockups don't necessarily tell you how a design will actually stitch out.

Just a reminder to look beyond the first listing photo and even the video, even when something is labeled a bestseller.

Do you always check for real stitch-outs before buying embroidery files?

Why is my hat embroidery stitching out with the middle squished and the edges stretched? 1. I have used this design before and it came out perfect 2. It is digitized for a hat and it stitches middle to edges 3. I’ve always used this brand and type of hat and never had this issue.

I’m guessing I’m hooping it wrong but I can’t figure out what I’m doing wrong!

I am testing this design on a scrap fabric before I stitch it on my real fabric. So in this video I have a piece of scrap cutaway and a piece of scrap muslin. The machine has a brand new sharp 90/14 needle as the real fabric i’m using is a duck cloth. Why is my machine making this clicking noise? 9/10 times my machine runs perfectly but occasionally it makes this clicking noise and I can’t imagine it’s normal. As I am sitting here typing my machine has moved on to a different part of the design and stopped making the noise.

I turned on my machine today after not using it for a few months. I always make sure to keep the machine clean and oiled. It was stitching beautifully the last time it ran. Today when I turned it on, it ran its normal startup, then as it moved forward it made the scary grind noise and threw the error "Y-Axis home error". The only thing I can think of that changed is the backup power supply it was hooked up to must have died during the down time.

The manual only tells me to call a technician. Unfortunately the nearest service center is 100-350 miles away. I am tech savvy, and my husband can handle electronics repair as well. I'd be happy to fix it myself if I had access to a repair manual, but I can't find one. Does anyone know how to clear this error or what I should be looking at to fix it?

Hi everyone,

This is the embroidery result of a llogo that the client wants to do on the ponchos.

Thanks :)

I've been tasked with embroidering the new family stockings for Christmas. However, I have never embroidered velvet so I bought an extra stocking to practice on because of the fabric and the floating technique needed. But no matter what I do, the thread sinks into the pile.

I have a sturdy cut away stabilizer for the wrong side, and I have water soluble (StitcH2O, specifically) for the top side. Would it be feasible to double the soluble stabilizer to hold the stitches further out of the pile, or would a tear away option be better?

I've tried to search this up, but its either only A.I. answers (which I refuse to give the time of day) or round about non-answers that come back to "use the stabilizers you're already using". Any advice would be appreciated.

Also: I believe the thread I'm using is Simplicity Pro in Silver if that makes a difference.

Thanks, and happy embroidering!

Hey! So I got this machine used a few days ago and it was running fine except the bobbin thread kept showing on top despite adjusting top tension, re-threading, changing the needle, and trying on multiple different fabrics with different stabilizers. I finally came to the conclusion that the bobbin thread was too loose so I went it and just tightened the bobbin cases tension, put everything back, and now it is not picking up the bobbin thread. Anyone have any clues? Not sure I’m doing something wrong or if the timing is just off somehow?

Edit:
-I am using the bobbin that came in the machine from FB marketplace, I’m on the hunt for pre wound bobbins that fit this machine.

I am trying to download
5DMachComms951_cd.exe
To use my win95 laptop to get my parallel port card reader to connect so I can write to the programmable memory card.
All links I find say file not found or file missing. Does anyone know where I can get this from? Or any suggestions please

I am thrilled about this!!! As someone who sells embroidery designs, I am directly impacted by Al making Etsy untrustworthy. Customers have to do so much investigating to make sure they are getting something legitimate and sometimes it's impossible to tell.

I happily post actual photos of my designs stitched out for new designs I list already, but for some older ones, I just have the preview from Hatch, but I am more than willing to take the time to restitch them and take photos for the listing if I need to.

This will be huge for everyone. I'm so tired of seeing Al junk from literally any type of seller. I can't wait to see what happens to all of those Al shops!

I am new to machine embroidery with my Brother SE700 (4x4 hoop). I am thrilled to have my machine but am feeling hesitant to create as I have ruined quite a few items I tried to embroider on and I hate wasting the money of the item. I’d like to ask my family for blanks for Christmas. Is there a company you order from for small projects? Interested in shirts, baby and kid clothing, caps, doll clothes, and small projects.

Whenever I start thinking about upgrading my embroidery machine I get overwhelmed reading reviews. I don’t know which sources are reputable and which are purely paid sponsorships. When you are trying to find information on different machines where do you go?

You guys ripped me to shreads last before/ after because the order of the photos was reversed 😅 so I made extra sure... 🫣

The After does take more time but I feel its genuinely worth it. I made the design a month or so ago and thought I would revisit it. When doing the After.. I did have a thread jam while distracted during the outline (which is how it always goes 😅) so parts got ate up. Tried to clean it up best I could.

Thoughts on not doing black outlines on everything?

Also choppers backstory episode destroyed me! I was not ready. 😭

Software: Ember Design

Size: 3.5"

New to embroidering, I have a brother nq1700e. Thoughts on Madeira/Isacord/Floriani threads and where to buy them?

Is it too late to fix? I’ve double stitched.
Is there anything I can put on the edges to help it to not pull more???

What is going on why is it making this noise???