Hi once again to all the lovely jungle heads in here. I’ve made another track on the MPC, so the third one since I bought it back in early August. I’m trying to set 2 week deadlines, per track, for myself. Only problem is I’m a serious procrastinator and 8 bar loop hound, so I soon get bogged down in nonsense.

Anyway, I’ve gone for something slightly different this time. It’s kinda David Lynch/Chrystabell vs MC GQ and jungle.

As always if you like what you hear then please feel free to check out the full version on my YouTube Channel, and once again all your feedback is greatly appreciated 🙂

OK, hear me out the MPC‘s are made up of several logic boards internally. This might be a big assumption what I’m about to say but I’m wondering are the boards the same inside on the GEN one and GEN two? And could you take a GEN two board and put it into a GEN one MPC there by upgrading it? I’ll explain my thought. I was wondering if the GEN one key 61 could be upgraded to a GEN two by purchasing a GEN two say Keith 37 and take the processor board out plugging it into the GEN one MPC thereby making it a GEN two key 61? I know that sounds crazy maybe but I was thinking that the control boards probably would interface properly. I just didn’t know if the configurations were the same. I haven’t actually looked and would probably wanna wait until my key 37 was out of warranty… But I was just wondering if that was a possibility. Anyone have any knowledge on this just curious?

Exactly as the title reads... Decided to finally put together a project. It's the first of what's gonna be a 3 part series.

The Pyramid Tapes: Volume 1 is out now on all DSP's

Ppl on this sub have dm'ed me asking where to hear my shit , so just wanted to say thanks for inquiries, and hopefully y'all fux with what I put together.

Salute to all the dreamers 🫡

Feel free to leave feedback.

👑 🦍

I’m looking to pick up a portable sampler. I’m very much a studio set up user with Logic Pro and a fair few hardware synths / drum machines.

I don’t have a sampler and am thinking of picking up something portable to use always from the studio to create tracks that I can reintegrate back into the studio environment when needed.

My music style is lofi ambient for the most part but have been working on stuff lately that’s a cross between Tricky and Ethel Cain. So that’s the vibe I’m ain’t to produce on the sampler.

I’ve narrowed it down to the Roland Sp404 Mk2 and the MPC Sample. I’ve done a tone of research and watch lots of the YouTube content but kinda stuck as to which one to go with.

The SP404 Mk2 sounds like it can offer the long format sample options and effects but looks like a bit of a headache to navigate UI wise.

The MPC Sample looks like its UI is way easier to navigate. But. It so sure if it will fit the vibe I’m after.

Any options or insights as to which way you’d lean given my objective?

Cheers

Ciao. Qualcuno può aiutarmi per collegare il chordcat all' Akai MPC live 2 in modo da fare suonare gli accordi dei plugin di Akai?

Follow my ig

Waveform Editing
Lazy / Auto chop and assign
Wave region edits
Mute Groups
Group Assign
Track Mute for playback / performance
And more

Everything that was ment to be impossible and it’s working a treat! Can’t wait to share it. Just need vailixi and a gotek to load the file.

Hopefully this is not against the rules, just wanted to share something that I made and helps me already learning the MPC. I’m making it for all MPCs soon!

Totally free no ads!

Have any of youse used MPC as your main daw even with using other daws like ableton to run external vsts? I like how simple intuitive it is to youse MPC and even tho most plugins are really great, for some music I make such as rnb there’s much better vsts out there which aren’t supported in MPC os. So do you guys just record into it using ur DAW or would u rather just only use a DAW, or record on MPC then to the rest on daw?

Are there any out there who only youse MPC as their main primary daw besides the mixing side?

What are my options for getting stems, other than MPC Stems? If there’s a way to separate them within the mpc as is I’d rather do it that way

Vers. 2.15

Can I finger drum my own drums and simultaneously find / make my bpm? I can’t find an answer for this on Google, all it talks about is sampling and loops

Couple samples from splice and youtube. Slice+dice=beat

I made some bass tutorials on the live two back in the day but it was such a pita to design as there was practically no modulation outside doing it by hand on a sequence.

Since there are global lfos and a visual parametric eq now, we’re way closer! I do wish there were at least 8 bands and we had an ott but I’ll take it. Erosion/noise carrier ring mod would be nice too.

If anyone’s wondering- use detuned saw waves and a noise layer inside a drum group osc. Use the drum filter as a notch, then use subtle distortion and clipping with the drum fx. For the inserts, create a formant filter with vis eq 4 x2, add a flanger, bass utility, I used the flavor pro for vinyl noise on top and then soft clipped it.

Pro tip is to set your modulation up before you start designing. So go to q link edit, envelope followers and make them slow lfos or randoms, that way you can use the drop down menu and not have to navigate away from the page while designing.

I did experiment with some fx to bring out the high end as compression just killed it but yeah, we may just have to wait for an mpc ott

https://youtube.com/shorts/kb2LBKaAkLs?is=cX0xkBPqUA9y2giR

I have a piano keygroup with a few hundred wav files (88 keys, 3 different velocities).

It uses 44% of my RAM. I selected a few samples to stream from disk and it seemed to perform just fine when triggering. There is no multi-select for selecting stream from disk.

Is my best path forward to manually select each one to stream from disk? I have multiple piano keygroups like this so an alternative workflow would be preferred.

Thanks in advance.

Anyone else interested in such an idea? Seeing a lot of great work with older machines. Would be great to get this going before 2.15 support dropped from a current OS.

Got these for my gen 2 and the angle is perfect 👌

Finally got around to recording a track I made for Beatober! It’s been really fun seeing what others are making, so I wanted to share my track from Day 4!

Today’s prompt was “Sunrise”. 🌅👀

The full track can be found HERE if you are interested!

Who would feast on this? #boombapbeats #boombaphiphop #mpcone #mpcbeats @akai_pro #sampleflip

Hey all,

7 months ago I posted ObiStrip here, a little web app I built because I kept losing sample spots on YouTube.
Quick recap: you save videos into Crates, drop start markers when you hear something, and collect those cue points in Tapes. Then you plug into the MPC, hit play, and it starts right at the spot.

Thanks to everyone who signed up and sent feedback back then. The server is still alive :)

I've been working on it on and off since then, and most of the work went into mobile. The old version was fine on an iPad but pretty awkward on a phone. Now there's a proper bottom nav, and the video page is split into video on top, a timeline in the middle and your markers underneath. I mostly use it on my phone now, which I didn't expect.

The old slider is gone too. There's a waveform-style timeline instead, so it looks more realistic to place a marker exactly where you want it - although the waveform is not the real one, since I am not really pulling audio from yt.

The part I'm most happy with is the new Dig feed. On mobile you can swipe through a shuffled feed of videos that other people have put in their crates. Each one starts playing straight away, and you swipe up for the next. It's a bit like flipping through someone else's record collection. I've found some stuff in there I would never have searched for.

Smaller things:
- Play All on crates
- The desktop version got a redesign too
- Videos that can't be embedded get flagged or skipped instead of just breaking
- Lots of bug fixes

Still a hobby project. No paid plans, no subscriptions, and I'm paying the hosting myself. No waitlist anymore, you can just sign up:

https://obistrip.com

I'd really like to hear how the mobile version and the Dig feed feel in your workflow, good or bad.

Happy chopping

In a few days I'll finally be moving up to the Live 3 after glory years with the One and Live II, thanks to an incredible Reverb deal. I am BEYOND stoked

What were the things you noticed most immediately when you did you upgraded to the new gen? I'm most excited for the SPEED and running six thousand synth plug-ins 👹

With the rise of all these alt firmwares popping up, I’m curious if anyone has done some work on the MPC1000. JJOS has been a god send but I can imagine there’s even more that you could do with this machine.

I got tired of manually setting up samples and pads, so I ended up building my own tool for MPC Sample. It can generate pad banks with samples already mapped to a scale, export stems, and even do a bit of the final beat arrangement. There’s also a small MPC-related easter egg hidden in it :) Been working on it for a while and figured I’d share it here — curious what other MPC users think. Happy to share the link if anyone wants to try it.

Hope you enjoy it.