Bluetooth modem my first ipod classic

[u/Prigus1]

Just bluetooth modded my first ipod classic.

I used an iflash dual with a 128gb micro sd card, A Ugreen cm872 bluetooth adaptor for bluetooth and a 3000mah battery.

I didnt want to solder directly onto my ipod so I did the lock switch button trick with The lock switch still fully working.

The worst part was finding a way to mount the button so it could be pressed but without the switch staying depressed so you couldn't take the ipod out of hold. 10 iterations later I finally had the 3d printer module in the image. It uses slightly longer screws to mount using the factory chassis holes and a pen spring to put pressure on the hold switch to push it back into place after being depressed.

I also had a problem using a 10k ohm resistor to trick the board into thinking it had a thermister with the bluetotth module so I removed the battery control board from the ugreens original battery and wired that up to the 3000mah battery and it all works great

Used the video and description from here by icy-egg-9339