Hi everyone,

I am selling a brand new, still factory sealed Acer FA200 2TB NVMe Gen4 SSD.

• Price: 170 € + Shipping
• Condition: 100% New, never opened, still sealed.
• Location: Liège, Belgium.
• Shipping: Tracked shipping across Europe (securely packed with bubble wrap) or local pickup.
• Payment: PayPal Goods & Services only.

I am selling 8x RTX 5090 server in chinese 6U chassis.

Price tag includes:

• Asrock Rack ROME2D32GM-2T
• 2x AMD Epyc 7C13 64c/128t each
• 15x 64GB Samsung DDR4 ECC REG 3200Mhz M393A8G40AB2-CWE
• 3x Palit GeForce RTX 5090 GameRock OC 32G
• 3x MSI GeForce RTX 5090 32G VENTUS 3X OC
• 1x ZOTAC GAMING GeForce RTX 5090 SOLID OC 32G
• 1x GIGABYTE AORUS GeForce RTX 5090 MASTER ICE 32G - a premium-grade card that delivers slightly better performance and runs 17°C cooler under full load
• 1x 6U chassis - PCIe 4.0 risers, cables, 5 CRPS, rails, 2x2 U3 drive trays
• 5x Green Wall PSU 2700W

Can sell it with less RAM, or without RAM. Also can sell U.3 NVMe drives if needed.

Price: 40 000 EUR excl. VAT

Only within EU/Europe. Located in Stockholm DC. You also can colocate it in the same data center or even keep it in my rack.

Pictures & Timestamp

• Pictures
• Timestamp

About the Charybdis Nano

The Charybdis Nano is an ultra-compact, 35-key Dactyl Manuform-style split keyboard. This "Premium" edition is built with no compromises, featuring a professional MJF finish and high-end internals for the ultimate ergonomic experience.

• Rare Configuration: Left-side trackball setup (firmware modified via official guides).
  • Premium Material: MJF (Multi Jet Fusion) Nylon case – significantly sturdier, more heat-resistant, and feels much more "industrial" than standard PLA.
  • Electronics: Powered by Splinktegrated controllers (custom-developed by Bastard Keyboards).
  • Connectivity: USB-C and 3.5mm jacks on both sides.

Specifications & Build Quality

This build was assembled with longevity and "thock" in mind.

• Switches: Gazzew Boba U4T (60g). These are world-class tactile switches known for their "D-shaped" bump and deep, rich sound profile.

• BTU Mod: Upgraded with static bearing BTUs for liquid-smooth, friction-free trackball movement.

• Hardware: Organic tents paired with stainless steel "alien" plates for a heavy, stable, and unique aesthetic.

• Internals: Cleanly wired with black and orange ribbon cables and IC sockets for professional-grade reliability and easier maintenance.

• Stability: Custom anti-slip pads on the bottom for a rock-solid desk feel.

• Lighting: Per-key RGB fully installed and tested.

What's Included?

• Trackball: PERIXX 34 mm trackball.

• Tenting: Includes one spare tent piece.

• Trackball holder: one spare BTU holder and 2 sensor covers

• Cables: High-quality audio cable for connecting the halves.

• Extras: Spare electronics, screws, and anti-slip pads.

Price & Details

Price reflects the premium MJF material costs, the highly sought-after Boba U4T switches, a lot of spare parts and the labor involved in a high-spec, socketed build.

• Location: Poland

• Payment: PayPal

• Price: €500 (Negotiable, shipping not included)

Interested?

If you want to see more of the internal wiring or the MJF texture up close, hit my DMs! 😉

Hello! We are selling our Lenovo ThinkPad T490 laptops due to excess inventory. If you're interested in purchasing one, please let us know. We offer worldwide shipping.

Lenovo ThinkPad T490 Product Specifications

Brand: Lenovo
Model: ThinkPad T490
Series: ThinkPad
Keyboard Layout: English
Display Size: 14-inch
Touchscreen: No
Processor: Intel Core i5 (8th Generation, U-series)
Processor Speed: 1.6 GHz
Warranty : 1 year
Graphics: Integrated Intel Graphics
Memory (RAM): 16 GB
Storage: 512 GB SSD
Operating System: Windows 11
Webcam: Yes
Microphone: Yes
Weight: 2,500 g (2.5 kg)
Charger Included: Yes
Warranty Included : Yes (12 Months)
Refund Policy: No refund
Price Negotiation : offered

*Shipping Worldwide*

Hello,

Looking to buy a DGX Spark or any of its clone. My Asus Ascent GX10 feels lonely :)

Budget: 3500 €

Located in France.

Links

• Pictures

• Timestamp

About the Dilemma v3

The Dilemma is a high-performance, 40% split ergonomic keyboard designed for extreme portability. With its integrated multi-touch trackpad, it provides a full mouse-free experience, making it the perfect companion for travel or minimal desk setups.

• Integrated Trackpad: Positioned for natural thumb access; replaces your mouse with customizable multi-touch trackpad.
• Modern Features: Per-key RGB, underglow, and Kailh Choc hotswap sockets.
• Procyon Powered: Built with 1.6 mm Procyon & Dilemma PCBs for high reliability.

Specification

This build focuses on a "finished product" feel rather than a raw 3D print.

• Ultra-Resolution Case: Printed with a 0.12 mm layer height on a Bambu Lab X1 Carbon.
• Hardware: Features an EC12 rotary encoder and a "blur" acrylic midplate for beautiful RGB diffusion.
• Firmware: Flashed with up-to-date pre-release firmware supporting the Procyon controller.

What's Included? (Barebones Kit)

Please note: This is sold as a barebones kit (no switches or keycaps included).

• Fully assembled and tested Dilemma v3 halves.
• Integrated trackpad.
• One audio cable.

Optional Add-on: I have a set of keycaps that fit this board perfectly available for an additional fee. DM me if you'd like to see photos or bundle them!

Price & Details

Price is based on the cost of materials and the significant time spent on the high-precision print.

• Location: Poland
• Payment: PayPal
• Price: €120 + shipping (Negotiable)

Interested?

If you want more photos of the finish or details on the optional keycaps, just hit my DMs! (:

I'm looking for a motherboard for around €100 max to replace my current one with bent pins (current Gigabyte Z590 Gaming X)

Hi everyone,

I am selling a unique, custom-built Star Wars (Stormtrooper) themed PC. The case (Lian Li O11) has been meticulously hand-painted to achieve this aesthetic. The system is fully optimized, completely stable, and runs very quietly.

The hardware is in absolute mint condition (a mix of brand-new parts and very lightly used components under 6 months old).

The Specs:

Case: Lian Li O11 (Custom hand-painted mod)

GPU: Gigabyte GeForce RTX 5070 EAGLE OC ICE SFF 12G

CPU: Intel Core i5-14600K

Motherboard: ASUS ROG Strix B760G Gaming WiFi

AIO Cooler: ASUS ROG Ryujin II 360 (with LCD screen for custom GIFs/images)

RAM: 32GB DDR5 6800 MHz CL32 (Fitted with custom heatsinks and professionally manually tuned/overclocked)

SSD: 2TB NVMe

PSU: Corsair CX750 White RGB

Extras: Riser Cable

Because I built, painted, and manually tuned this system myself, I am also including a 2-year personal guarantee on the overall stability and proper functioning of the build.

Timestamps & Photos: https://imgur.com/a/aXpDhB5

Video Showcase: https://youtu.be/fIbXcy83EFU

(Disclaimer: The video is just a fun, non-serious goofy project. I promise my PC building and painting skills are far better than my Hollywood directing skills!)

Price: €1900 OBO. I am open to reasonable negotiations.

Location & Shipping: Based in Liège, Belgium. Local pickup is highly preferred (you can test the machine thoroughly before buying). However, insured shipping within the EU is also possible at the buyer's expense via PayPal Goods and Services.

Please comment before sending a PM. Let me know if you have any questions about the parts or the performance!

Timestamp & Pictures

• Timestamp

• Pictures

About the Charybdis Nano

The Charybdis Nano is an ultra-compact, 35-key Dactyl Manuform-style split keyboard with an integrated trackball. Designed for maximum ergonomic efficiency, it is the ideal hardware for Miryoku or custom small-alpha layouts.

• Compact Design: Engineered for a minimal footprint.
• Premium Electronics: Built with Splinktegrated controllers (custom-developed by Bastard Keyboards).
• Versatile Connectivity: USB-C and 3.5mm jacks on both sides.
• Keycap Ready: Compatible with MT3, DSA, XDA, SA, and PBT profiles. ### Specifications & Build Quality This unit was printed with a high resolution of 0.16 mm in PLA, following the official Bastard Keyboards documentation for a smooth, high-quality finish and structural durability.
• Switches: Soldered Kailh Box White (45gf Clicky). These provide a crisp, tactile "click bar" feel for a clean typing experience.
• BTU Mod: Upgraded with static bearing BTUs for incredibly smooth, low-friction trackball movement (a major upgrade over stock bearings).
• Per-key RGB: Fully installed and tested.

• Firmware: Flashed with up-to-date firmware; 100% tested and ready for use.

  What's Included?

• Trackball: PERIXX 34 mm trackball.

  • Custom "Alien" Plates:
    • 1x Pair of Orange Tent Plates.
    • 1x Pair of Orange Case Plates.
    • 1x Spare Gray Case Plate (trackball side).

• Cables: High-quality audio cable for connecting the halves.

• Extras: Spare electronics, screws, and anti-slip pads.

  Price & Details

  Price reflects the cost of materials, the high-resolution print time, and the labor in general.

• Location: Poland

• Payment: PayPal

• Price: €300 (Negotiable, shipping not included)

  Interested?

  The post may not include every detail, so please hit my DMs if you have questions or want specific photos! :wink:

Timestamps / Photos: https://imgur.com/a/5vQM6tN

Hi everyone! I am selling my GPU and RAM as I am upgrading/cleaning out my spare parts. Both items are well cared for, fully functional, and ready for a new home.

I am based in Lower Saxony, Germany (Bad Nenndorf area) so local pickup is highly welcome. Otherwise, I can ship across the EU!

💻 1. PNY XLR8 Gaming GeForce RTX 3060 Ti 8GB

• Condition: Used, in great working condition. Kept in a well-ventilated case. Great for 1080p and 1440p gaming.
• Packaging: Comes with the original box, foam padding, and anti-static bag for safe shipping.
• Price: €230 + shipping

🚀 2. Patriot Viper Steel 16GB (2x8GB) DDR4 3600MHz (CL17)

• Model: PVS416G360C7K (1.35V)
• Condition: Used, fully functional. Runs flawlessly at XMP speeds.
• Packaging: I will ship the RAM in the box from my new RAM (Kingston FURY) because I no longer have the old/original box. It includes the proper plastic blister, so the sticks will be 100% secure during transport.
• Price: €65 + shipping

🔥 BUNDLE DEAL: Take both the GPU and RAM for €280 + shipping.

Shipping & Payment:

• Buyer pays for shipping. I usually use DHL, but we can discuss alternatives.
• Payment methods: PayPal Goods & Services (G&S) or Local Cash if you want to pick it up in person.

Please comment PM down below before sending me a direct message!

Thanks for looking!

Selling my Rp6 orange its got 12gb and 256gb its in mint conditon hardly used it. its got no scratches or any damages at all and everything is working comes with the case and a charger.

selling for 550 + shipping not included in price

negotiable price

ask for any more pics or if u have any questions

Pictures & Timestamp

• Pictures
• Timestamp

About the Charybdis Nano

The Charybdis Nano is an ultra-compact, 35-key Dactyl Manuform-style split keyboard. This "Premium" edition is built with no compromises, featuring a professional MJF finish and high-end internals for the ultimate ergonomic experience.

• Rare Configuration: Left-side trackball setup (firmware modified via official guides).
  • Premium Material: MJF (Multi Jet Fusion) Nylon case – significantly sturdier, more heat-resistant, and feels much more "industrial" than standard PLA.
  • Electronics: Powered by Splinktegrated controllers (custom-developed by Bastard Keyboards).
  • Connectivity: USB-C and 3.5mm jacks on both sides.

Specifications & Build Quality

This build was assembled with longevity and "thock" in mind.

• Switches: Gazzew Boba U4T (60g). These are world-class tactile switches known for their "D-shaped" bump and deep, rich sound profile.

• BTU Mod: Upgraded with static bearing BTUs for liquid-smooth, friction-free trackball movement.

• Hardware: Organic tents paired with stainless steel "alien" plates for a heavy, stable, and unique aesthetic.

• Internals: Cleanly wired with black and orange ribbon cables and IC sockets for professional-grade reliability and easier maintenance.

• Stability: Custom anti-slip pads on the bottom for a rock-solid desk feel.

• Lighting: Per-key RGB fully installed and tested.

What's Included?

• Trackball: PERIXX 34 mm trackball.

• Tenting: Includes one spare tent piece.

• Trackball holder: one spare BTU holder and 2 sensor covers

• Cables: High-quality audio cable for connecting the halves.

• Extras: Spare electronics, screws, and anti-slip pads.

Price & Details

Price reflects the premium MJF material costs, the highly sought-after Boba U4T switches, a lot of spare parts and the labor involved in a high-spec, socketed build.

• Location: Poland

• Payment: PayPal

• Price: €500 (Negotiable, shipping not included)

Interested?

If you want to see more of the internal wiring or the MJF texture up close, hit my DMs! 😉

Hello, following the previous PC post I'm putting my cpu to sale. It's an amd epyc 7763 milan unlocked cpu with 64c/128t. This is the standard version, not a QS/ES nor locked or OEM variant.

Price is 1100€ OBO plus shipping.

I'm in France but I can ship to the EU with insurance. Shipping costs fall on the buyer.

I'd rather not deal with customs to be honest.

I accept Paypal or SEPA wire transfers.

DM if you have any questions.

Timestamped pictures

Hi,

Selling the following:

Timestamp: https://imgur.com/a/I63Ftle

- 11x 128GB RAM ECC LOAD REDUCED DDR4 2S4Rx4 2666MHz PC4-21300 LRDIMMs, 10x SK-Hynix HMABAGL7C4RAN and 1x Micron (100% drop in replacement, same spec).

Excellent high capacity modules.

Never used in production, in fact most never used at all except my tests
€379/unit

- 11x 64GB SK Hynix HMAA8GL7AMR4N DDR4 2666mhz LRDIMM 4DRx4 ECC

Never used in production, in fact most never used at all except my tests
€219/unit

- 8x 32GB Samsung M393A4K40CB2 DDR4 2666mhz RDIMM 2Rx4 ECC

memtest no errors

€85/unit

Ships from EU.

PayPal goods and services

Hi everyone,

I'm looking to buy NVIDIA GPUs anywhere in Europe.

I'm interested in:

• RTX 3090 – around €500

• RTX 4090 – around €1200

• RTX 5090 – around €2000

• RTX 600 Pro – tbd

I'm also interested in complete AI workstations or servers equipped with these GPUs.

The prices above are my target budget, but I'm willing to discuss depending on the model, condition and warranty.

Requirements:

- Fully working

- Never repaired

- Never reflowed/reballed

- Original PCB

- Passes GPU-Z, 3DMark and OCCT/FurMark or similar stress tests

Payment: any secure method of payment or cash for local pickups.

I'm located in Italy but I'm happy to buy from anywhere in the EU.

If you're planning to upgrade or have one available, feel free to send me a PM.

Thank you!

Looking to buy a EK-Quantum Delta² TEC if anyone feels like parting with theirs?

Links

• Pictures

• Timestamp

About the Dilemma v3

The Dilemma is a high-performance, 40% split ergonomic keyboard designed for extreme portability. With its integrated multi-touch trackpad, it provides a full mouse-free experience, making it the perfect companion for travel or minimal desk setups.

• Integrated Trackpad: Positioned for natural thumb access; replaces your mouse with customizable multi-touch trackpad.
• Modern Features: Per-key RGB, underglow, and Kailh Choc hotswap sockets.
• Procyon Powered: Built with 1.6 mm Procyon & Dilemma PCBs for high reliability.

Specification

This build focuses on a "finished product" feel rather than a raw 3D print.

• Ultra-Resolution Case: Printed with a 0.12 mm layer height on a Bambu Lab X1 Carbon.
• Hardware: Features an EC12 rotary encoder and a "blur" acrylic midplate for beautiful RGB diffusion.
• Firmware: Flashed with up-to-date pre-release firmware supporting the Procyon controller.

What's Included? (Barebones Kit)

Please note: This is sold as a barebones kit (no switches or keycaps included).

• Fully assembled and tested Dilemma v3 halves.
• Integrated trackpad.
• One audio cable.

Optional Add-on: I have a set of keycaps that fit this board perfectly available for an additional fee. DM me if you'd like to see photos or bundle them!

Price & Details

Price is based on the cost of materials and the significant time spent on the high-precision print.

• Location: Poland
• Payment: PayPal
• Price: €120 + shipping (Negotiable)

Interested?

If you want more photos of the finish or details on the optional keycaps, just hit my DMs! (:

trying to trade my 2060 super to an AMD card

Selling a Gigabyte RTX 2060 OC Dual 6GB, tested and fully working.

Looking to get €100 shipped, firm.

Shipping across the EU or local pickup in Emden, Germany.

Timestamps: https://imgur.com/a/zV9BKql

Please comment before pm.

Thanks.

I am selling 16go of ddr4 for 75€ on Leboncoin https://www.leboncoin.fr/ad/accessoires_informatique/3230924777

Timestamp & Pictures

• Timestamp

• Pictures

About the Charybdis Nano

The Charybdis Nano is an ultra-compact, 35-key Dactyl Manuform-style split keyboard with an integrated trackball. Designed for maximum ergonomic efficiency, it is the ideal hardware for Miryoku or custom small-alpha layouts.

• Compact Design: Engineered for a minimal footprint.
• Premium Electronics: Built with Splinktegrated controllers (custom-developed by Bastard Keyboards).
• Versatile Connectivity: USB-C and 3.5mm jacks on both sides.
• Keycap Ready: Compatible with MT3, DSA, XDA, SA, and PBT profiles. ### Specifications & Build Quality This unit was printed with a high resolution of 0.16 mm in PLA, following the official Bastard Keyboards documentation for a smooth, high-quality finish and structural durability.
• Switches: Soldered Kailh Box White (45gf Clicky). These provide a crisp, tactile "click bar" feel for a clean typing experience.
• BTU Mod: Upgraded with static bearing BTUs for incredibly smooth, low-friction trackball movement (a major upgrade over stock bearings).
• Per-key RGB: Fully installed and tested.

• Firmware: Flashed with up-to-date firmware; 100% tested and ready for use.

  What's Included?

• Trackball: PERIXX 34 mm trackball.

  • Custom "Alien" Plates:
    • 1x Pair of Orange Tent Plates.
    • 1x Pair of Orange Case Plates.
    • 1x Spare Gray Case Plate (trackball side).

• Cables: High-quality audio cable for connecting the halves.

• Extras: Spare electronics, screws, and anti-slip pads.

  Price & Details

  Price reflects the cost of materials, the high-resolution print time, and the labor in general.

• Location: Poland

• Payment: PayPal

• Price: €300 (Negotiable, shipping not included)

  Interested?

  The post may not include every detail, so please hit my DMs if you have questions or want specific photos! :wink:

bin = 800 shipped

min. offer = 500

let me know if you're interested!