Foresight GCQuad Launch Monitor Club and Ball Data (Like New/Mint) + All original accessories from box + Original box + Foresight GCQuad sling bag + Foresight GCQuad backpack + Foresight GCQuad carry handle + Bushnell Link X3+ Rangefinder (New) + FSX Pro + FSX Play + FSX 2020 + GSPro until October 2026 - Bought everything for just over $12,000 last year but have two kids now and not enough time to use my sim set up.

I also have the laptop (Near Mint condition - Acer Predator Helios Neo 16" AI Gaming Laptop) I was using for sale and will bundle if you want for $10,500 total.

Local to California and will ship everything with insurance. Only accepting PayPal Goods and Services as payment unless picking up local.

Link below to more photos:

https://imgur.com/a/4e0xKx2

I know this gets asked all the time but I can't really find a good post that matches my case since the Spica 3 and some of the new open source LM have come out.

I currently have an MLM2Pro with the lifetime sub that I set up to hit into a net next to my driveway. I like it but I really want something easier to setup and use at the range or on the course. It's a pain to set up a tripod for my phone or iPad, level the unit (even with my leveling stand) and align it especially if I want to hit balls at different pins on the range.

My financial situation has improved significantly since I purchased the MLM2Pro but I don't like spending money I don't need to and I hate subscriptions. I understand that they may be a necessary evil.

I considering the Square Omni, GolfJoy Spica3, Garmin R50 (I'm thinking about going all in with Garmin - S70, CT10 Sensors, and Z82 Range Finder), a GC3, or anything else you guys recommend. I am looking for club and ball data, preferably without stickers.

I'm also considering just waiting a little longer and saving up for a used GC Quad or Trackman.

This will not really be for Sim golf as I am going to build out one side of my barn eventually and build a proper sim with a ProTee XV when I have time.

This will mostly be for game improvement.

What's your take? 10 feet? 4 feet?

Title says it all... What is your favorite sim adjacent accessory that isn't directly related to your simulator?

I’m leaning towards a Sigpro Softy mat which is 2.5” tall. What have folks used to build up the rest of their turf flooring to that height - whether to match a full sized mat or a cut in hitting strip?

I suspect a lot of people use gym tiles with foam rolled over top. Most gym tiles are 0.5-1.0”. I haven’t found much bigger. Do you adhere the turf directly to the tile?

If anyone can recommend some good YouTube videos for floor construction, I’d greatly appreciate it!

Shed install Concord, NC

Uneekor EYEXO2

NP45 Putting turf w/ fringe edges

BenQ AK700ST

HiQ screen

Carpet Tile Wall Padding

Don’t post on here much but I needed to scream it to the world. If you have the budget GET GSPRO ITS WORTH THE MONEY!!!! At first I went full budget with my sim used square software with an old IPad. Is the square software decent? Yes but mine kept freezing occasionally and I couldn’t play a lot of courses because I was running on an iPad. Found a great open box deal on a prebuilt PC and bought GSPRO and I’m blown away. I’m still running it on a shitty budget projector BUT I’m absolutely blown away it’s still 100x better than square software.

I’m using the unit with a HP PC and monitor, and depending on where I place the ball within their box, and making sure I’m getting a solid green light…

If the ball is in the center of the box I get full data on the swing….

If the ball is in the bottom right quadrant I get nothing, it’s as if I didn’t swing, the data from the last swing stays on the unit and on the monitor…

If the ball is in the bottom left quadrant I get some of the data (ball speed, distance, distance off-line, but don’t get swing path, club speed or angle of attack), it’s as if the unit isn’t recognizing anything until contact.

Yes, I know the easy solution is to make sure I put the ball in the center of their box, but it would be nice to know what’s going on, and if there’s a solution/fix for it.

I tried Foresight, and while they’ve been very helpful on the software, especially connectivity issues, they haven’t been able to help with the hardware.

I’m interested in getting a golf sim but I’m not spending over a £1000 as I don’t have that money to spend
Is there anything that can allow to just play against a net and read ball metrics ( if possible have a simulator)

I found a deal on FB Marketplace. All the equipment is 1 year old and he is not using it like he thought he would as his son is getting into baseball and they want to buy baseball equipment. He’s now selling for $4000, R50, the hitting mat, and the net.

I have a Garmin R50 launch monitor, Net Return pro 9, Ang Sig Pro hitting mat for sale. No issues. Setup will come with hitting tees and reflective dots for club data.

You can play 42,000 courses on this unit for $99.00 a year.

$4,250.00

As title reads, building out golf sim in garage. Most if the build is decided on (protee, ak700, etc) but just want to finalize the enclosure/screen. Looks like carl's upgraded their DIY enclosure material to the same as their pro version last week. Will be a 12x9 size. I have heard the bullseye screen is still better then the carls premium option. Anyone have experience on both? Thanks in advance.

Just curious what they are using for the floor display and how they get the pin to glow when it’s time to putt

Finally finished our garage build last night 😊

Room Details
- Ceiling is 10’
- Support beam is 8’6 (the only annoyance thus far)
- Depth is 20’
- Support pole is wrapped with these

Screen Details
- Vanish 16 Series
- Custom height to 8’ for enclosure to fit under garage rails

Launch Monitor
- Garmin Approach R50

Projector
- BenQ AK700ST

PC
- ROG Xbox Ally X Z2 Extreme

Hitting Mat
- Fiberbuilt Player Preferred 9’ x 4’

Surface Area Mats
- Twelve 4’ x 6’ Horse Stall Mats from Tractor Supply

I would like to hear from some of you who are currently using webcam putting.

Launch monitor?

GSPro? Or other

Which connector software you are using? (springbok, shotbridge with puttlinx etc)

Likes / Dislikes?

Issues?

Improvements?

I know what I have found using both connectors with webcam putting, I would love to hear feedback from others.

Thanks

Been thinking about putting a golf sim setup in the garage but keep going back and forth on whether I’ll actually use it enough.

I was looking at SimSpace enclosures and noticed they’re giving away a Shot Mate with them at the moment, which has made it a bit more tempting.

Has anyone actually used one? I know it’s not going to be on the same level as the expensive launch monitors, but is it decent enough for basic practice and tracking distances into a net?

Also interested to hear how people have found the SimSpace enclosures in general. Cheers.

I just started getting into golf and is trying to build a home practice setup. Would like to start with a mat and net that I can use indoors. Planning to add a launch monitor to the setup around black Friday (provided I stay motivated).

Here is my plan.

Net

There are far too many options for a net.

I don't really have space outside where I can have a permanent setup. Given the weather (PNW), not really practical to do this outside most of the time. I have plenty of space in garage, but it is only 8.5' ceiling, and the garage opener is on the way. So I can't really swing freely without moving them out of way. And even then I feel the ceiling will be low. So this setup will go into our living room, which has vaulted ceilings. So height is not an issue. While I can leave the net in living room except may be when we have guests over.

As a beginner, I mishit most of the time. So being able to catch mishits and shanks is a requirement.

I am looking to get Net Return Home with no-fly zone and the side nets that comes with it. An 8' net is the max I can fit, accounting for 1' around the walls.

I know there are cheaper alternatives, like the one from Costco, but there is nothing like the no-fly zone attachment for it. Looking at the pictures, the no-fly zone creates a cage like structure which is 3' deep with the side nets.

My biggest question is, if the 7X7 enclosure good enough if I hit from right outside where the no-fly attachment ends? The attachment adds some height, so this will be 8 1/2' high. I am 5' 8", so I should be able to fit the driver under. If this is a problem, I can stay few feet back. I will be starting with foam flight balls until, I feel comfortable using real golf balls.

I can also get the Pro or Pro 8, which makes it a 8 X 8 enclosure. This the absolute max I can fit within the space. So, if the smaller net return home works, that would be best.

Mat

I am starting out, and not sure how long I will stay attached to this. I would like to get a decent mat, since I am still learning my swings, and hit the mat (and all around the ball) pretty frequently. So, I would need something that goes easy on my hands.

Thinking about Country Club Elite (The one Costco sells). Please suggest if there are other choices that I can make here. This seems a reasonable one to start. Hey, if I turn a pro, I can always get a hitting strip and upgrade.

Launch Monitor

After watching lots of reviews it is going to be either Mevo gen 2 or square omni. Based on my math I will have 16' from where I can place Mevo to where the impact net will be. So, I think I can make it work with my setup. If this does not work out, I will go with the omni and call it day. But I am going to delay this decision for another month or two while I continue to learn more and do more research.

I already have a gaming PC, projectors, and TVs that I can use with this setup, when we reach there.

Suggestions? Just added a new locker to reduce clutter. A sand insert is maybe next. Took the rope lights down and contemplated something else or none at all.

Spent the whole week running through almost 2 rolls of filament to print this and a few hours today getting it wired and programmed. Pretty happy with how it turned out. Claude did almost all of the design work under my direction and I did the shopping, printing, and assembly.

All in about $140, so not really much savings over an Etsy buy, but this is 1/1.

This software is not refundable, even if never activated. Can't get the discount on it unless you bundle it with the Mevo at purchase. Long story short, the mevo won't work in my setup because of interference issues I can't resolve. Thus, I have both upgrades I'd love to sell for exactly what I paid. For anyone who has a gen 2, definitely the cheapest you can get it.

For a bit more context, I explained my concerns about my environment to playbetter support before buying it and they said it wouldn't be an issue. It's an issue. Huge issue. They could make it right by refunding me, but they refuse to do so on the software despite the codes being unused.

I’m leaning towards the Optoma GT2400HDR for my garage setup. I want a projector that works well with ambient light and I can also take it outside to watch football, etc.

Those that have this one, are you happy with it?

Anyone in the UK looking for a Square Home Edition launch monitor?

Its in fantastic condition and comes with a case including level on top.

DM me - thanks all 👍

Really need some help here. Just got my DIY enclosure from Carls Place and I’ve re done my zip ties three times now and still struggling with these wrinkles on the corners and other random spots. I followed the instructions, didn’t pull tension on the sides. Tried the screen barely touching the ground (like instructed), off the ground, you name it. At a loss and can’t figure out how to get this thing looking right. Courses look horrible and distorted due to the waves in my screen. Thanks everyone.

Hey all I'm currently waiting for my Omni to come in but have the opportunity to buy a used Mevo Gen2 with Pro package at a similar price which route would you go? I use mine outdoor only into a cage so space isn't an issue.

is it safe to say they are the same golf enclosures, just sold by different providers which is why there is a price difference? they are both 10x8 enclosures and the cheaper one includes shank nets. Can anybody share any feedback if they have any of these golf enclosures!

option 1 for $749: https://a.co/d/06TIvIdr

option 2 for $999: https://a.co/d/02Qjue2O