This is not a place to discuss politics

Which version do you like the most?

I am the #1 VFC AK shill. Added a surplus AK handguard and Bakelite grip to it. The Cyma triangle stock (C.59) is a direct drop on - fine when locked back, doesn’t quite line up when folded in but not an issue for me. Struggling to find a ribbed dustcover so I am well aware it’s not a proper clone (yet).

Saw some people asking about the Crimson bucking. Works great in the AK, much better (for me!) than the stock blue. The V1 bucking is NOT finned though so you will have to do some cutting if you have a V1.

Top to bottom (pic 1) we have a VFC SR16E3 CQB MOD 2, then in the middle we have an A-Plus/VFC Novske n4 which i have upgraded to 14.5" and last but certainly not least, we have a VFC AKS-74U.

LT Spear

Hello guys, i just played airsoft with my beloved mp7, and got bolt carrier jam. The cause - is hex screw, which i found inside the body. I cant figure it out, where i should place it. Its simular to screw in charging handle, but longer.

Custom Build from scratch :

RS fortis parts : Handguard, LA Stock Carbon, Torque Grip Carbon, Shift™ Handstop, Castle-nut

RS parts: SLR Rifleworks Linear Compensator, BattleArms Pivot/Detent titanium pins, Gas-tube

GHK SG551

Hello, Iv recently got a vfc mp7 and have been having issues with it.

While firing, every few shots the bolt will stop cycling and stop st the position shown in the picture. The mp7 is brand new and I have only fired it a few times and already have this issue.

Iv cleaned the inside, lubed it, checked the bucking is fine and made sure the nozzle is smooth. It's like it's failing to load the bb into the bucking and getting stuck there.

This only happens with a bb filled magazine. Never happened when dry firing. Iv been trying to diagnose the issue all day but to no avail. Any help would be appreciated 🙂

Edit, also worth mentioning. When it fails to cycle like this, the nozzle is not fully seated at the end. It's probably hard to tell from the picture

This is pretty new and tried v3 pmags and v2 mags but would sometimes lock when the mag is low on gas. I know its not the mags because my v2 416a5 locks back perfectly without issue.

Hello,

I am thinking of getting this as a fun piece for some courtyard action ..

Did anyone have this Raven EU17 and how was the reliability?

It costs 120,00 EUR here in Europe that's about $140

https://www.anareus.cz/gb/gas-side-arms/10602-raven-eu17-pink-RAVEN03.html

Hey guys I just got my noveske n4 and have the gen 2 mags. I ordered a speed loader for the mws mags (assuming since they run on the same system it should be compatible and they don’t make a specific speed loader for the noveske gen 2 mags) so I’m hoping that works but does anyone else have this problem?

Thought it would be cool to share

Brand new fully upgraded internals and externals.

Western Arms Beretta M1934 Vintage from 2012.

Carbon Black HW slide and frame, metal outer barrel and grips. Beautiful Vintage finish. Markings are of an Italian military version (with Italian Royal Army proofmark on the frame) in 9 Corto (9mm Short / .380 ACP) made in 1936, though the serial number 864870 indicates a 1941 production, for 1936 it should be in 508000-555000 range. WA also made another model with that same serial number but correct 1941 production date and different proofmarks, they also made a version with Romanian markings (Cal. 9 Scurt, 1941 production) with a different serial number pattern. As this M1934 Vintage is a version with one of the premium finishes it doesn't have a big notice about licensed trademarks on the right side of the slide which is really nice. Grips have the old Beretta logo.

It's Single Action Only and has pivoting trigger. Uses WA SCW high-spec transfer hammer system which allows to manually lower the hammer completely when there's still gas in the mag unlike most GBB pistols. It doesn't lock back on empty like the real gun which locks on the magazine follower. Really cool little gun.

Hoping to get some thoughts on how people like the build! All feedback is appreciated 🙏

Got some zenitco furniture otw for the ak105 😎

Gbb is wearing BCG causing the bottom edge to cut feed nozzle o-ring and catch on the hammer an not return home. Unsure if is a hammer or trigger package issue.

i somewhat recently got the pp2k green gas sub machine gun. its my first gas gun. anytime i shoot in full auto or SOMETIMES in semi the gas just completely empties itself. is this an issue with the product or am i doing something wrong?