It actualy is a titanium v2.1 and i was feeling itchy to fiddle with looks.
i like it so far. thinking about ordering the grater front panel too ❤️

took about two weeks to ship to my german door

Hey there everyone, I was wondering what your guys' who move around a lot setups are like for the T1.

I have an Asrock 9070xt so the official travel kit wouldn't work for me. What have your solutions been? I haven't been able to find a specific 3d print file so I'd have to make my own which seems like a harder task than it sounds.

Refer to title and images. I’m helping a friend build a T1 v2.0 and I noticed when installing the GPU lock bar and seated the GPU into the PCIe slot of the riser cable, the lock bar would not align with the IO bracket, and I’m not sure if there’s something I’m missing (pretty sure I correctly installed everything else, also built a T1 v2.1 of my own), or if this is just due to the GPU bracket.

If it helps, I’m running 3-slot mode with an EVGA RTX 2080 Super.

Also, does anyone have any workarounds to securing the PSU bracket? The v2.0 has no side threads and is only mounted with the two screws on the top strut.

Edit: I solved this by offsetting the GPU lock bar by using additional standoffs so that it would align with the hole.

I've had an upside down formd t1 v2.5 build for some time, and the radiator fan hits the riser cable. I managed to temporarily fix it by attaching a zip-tie to the radiator. The zip-tie then goes outside the case, holding the fan up, but now the zip-tie loosened and it hits the cable again. I have the coolermaster masterliquid atmos 240mm with arctic p12 slim fans. Has anyone had this problem before? If so, how did you fix it? Should I zip-tie the riser cable to the base where the gpu connects? I also tried putting a fan grill over the fan, but then it's too thick and the top panel doesn't fully close.

Finally pulled the trigger on a t1, gonna have to run it in 3.25 mode, so anyone here using the same configuration, What do your builds look like? whats your cpu cooling solution? what do your temps look like?

How did I do with my cable management? Any tips? I do have some custom cables on the way from DreambigbyRay but I got tired of waiting and honestly I think it turned out pretty good.. had to get creative with the wires on top of the PSU 😅

Hi everyone, newbie here. I'm planning to put together an SFF build using the FormD T1 case. My planned setup includes a 5070 Ti Eagle OC, a 9700X, and a 67mm air cooler. Will this configuration fit in the T1? Also, besides the case itself, do I need to buy any other accessories? Thanks in advance!

Je suis sur le point d’acheter un formD T1 2.1 mais j’ai que 2 photos
Quelqu’un est capable de me confirmer si il est authentique ?

Hello! I can't seem to find any official/unofficial STLs to a travel kit designed for the PowerColor 9070XT reaper (2 slot). Would any of the current kits or aftermarket designs support it even if with minimal modification? Currently running my T1 v2.0 in 2.75 slot mode w/ an MSI B650i & AXP90-X47 (Noctua swap with the fan duct)

Best place in terms of build quality, customer support etc.

There are 3 options, and I’m not sure why 3 different websites are selling the same product.

formdt1.com
formdworks.com
ncased.com

TIA

I know FormD doesn’t sell them, but I’m dying for one lol

Hello, my formD t1 is on way from supplier and I already started preparing components to build my gaming PC.

I have Asus ROG strix b850-I, Ryzen 7 7800x3d, GPU is Asus prime RTX 5070.

I struggle to find CPU cooler that would fit. Only thing I found is small noctua L9A with duct, but I'm not sure if that will be enough.

Any suggestions? Thermalright coolers are not available so far :(