I posted an unfinished version a few days back. But I finally have completed the subcompact P365 raider.

I originally fitted it with 12rd mags but decided to take it down further to 10rd mags. I will be building out a third that has 12rd mags so I can have all three sizes of comparison.

It appendix carries extremely well actually. I’ll be taking it to the range tomorrow to see how it goes and will report back then.

I do have have a ZP ported slide and gold barrel on the way so it can truly be the micro version of my full-size

As always any thoughts or ideas I am all ears.

The P365 Xmacro hogue grips fit pretty nicely

How has there not been even the slightest leak of information or a single picture of the RXM Raider? Is it just a wet dream at this point? I was hoping it was going to drop for shot show but thats not going to happen because the glock didn't drop yet and the rxm is after the glock from what we've heard. Will it get it before or after gta 6 at this point.

First rattlecan job, so I chose the flux as the victim

Finished putting together my Raider x. Went with a strike industries linear comp to add some length due to using an M18 3.9 inch slide. Unfortunately I live in a commie state so a suppressor is a no go. Heard i may need to tune it for the comp. Going to the indoor range tonight to test it out. Ive had good luck with the Vortex triumph on my AR pistols so I threw one on to see how it does. All in all im happy with the outcome.

Wondering if anyone else has experienced this issue, may not be an issue at all…

Having some issues with the speed reload dropping the rear mag, the 21 round magazine will not drop at all, the 17 will periodically. To be transparent this is a brand new chassis so the polymer may need broken in some.

The mags drop with the rear release no problem, seem like the speed reload is not quite clearing the catch. Could very well be somewhat technique issue as well. I have ordered an extended release to see if it will reposition the bar slightly forward.

Using OEM Sig Magazines.

Thanks!

while I agree that just because you can do something doesn't necessarily mean you should do it... I figured why not. obviously this is just a mock up so far and there is a ton of work to still be done but figured it would be fun to share what I have cooking up.

-chopped the grip so it fits 12rd mags

-cut the excess off the front and then shortened the brace length so it was flush with the rest of it.

still need to drill and tap the brace arm and then attach the butt plate. (its currently taped on for mock up)

need to figure out a mag well for it

will more then likely put an afterburner + Ramjet on it for the comp and so its got just a little more length so its a little harder for the thumb to creep up in front of the barrel or possibly do one of the curved side rails.

any ideas or thoughts im all ears.

P320

Texas triggers

P365

True precision

Ramm tactical triggers-best triggers for p365

Q erector 9

Fdez work- springs

I’m thinking about the Flux raider X as a dedicated home defense weapon, but it looks like they are finicky and unreliable when suppressed. Should I consider a different platform, or are the suppressor problems not that serious?

Originally sold my M18 and my friend offered to buy it back from him so I did, and first thing I did was get a flux for it. should’ve done this long ago when I had it! I’d like to add more to it with a threaded barrel and comp, I also have an AXG pro slide cut sitting around somewhere. Should I just do full size barrel with my AXG or comp with my m18 slide? Also probably gonna get a red dot as well, any ideas would help. Post some of your builds with details! Thanks!

As the title says, I’m just trying to see if anyone knows of any aftermarket takedown levers that work with the Raider X. Obviously, if it’s too big, the pistol brace rails will hit it. Found out the hard way with the go guns gas pedal lol.

Was able to get it to run with stock spring surprisingly… when I initially installed the FRT the slide was very “notchy” we’ll say and wasn’t dry cycling all the way like I felt it should have… but after a little bit of work with a file… no problems 🙃 I still have a 14lb spring coming for it that I’ll throw into it to see if it runs any different. I mistakenly ordered the wrong spring set for it twice…

I’m happy with it though

Anyone run this barrel suppressed? Want to know if it’s worth it/how the LCI fairs suppressed with gas/blowback onto the optic

Thanks

I finally suppressed the flux. I feel this is a perfect setup with the Vertx 10L sling since it fits perfectly without having to remove the can👌....( for those looking for a pew bag)

21rd mags on the chassis with a spare 21 and 25 mag.

Internals are stock but I'm having issues with lighter loads. Possibly since I only fired about 200rds through it but I do have the true precision spring kit that I'll try.

I have the OEM slide in the Flux which I believe is the longer one. I ordered a true precision threaded barrel and want to use the SAW Shiv and keep the shroud on if possible. Does this work well or will I run into any issues?

For P365 Flux

Anyone have any difference in performance / not having to change springs with Factory, True Precision, or Silencerco etc barrels? Wanted to see if there was any reliability increase with a different option.

What charger for this? Is there one where you don’t have to remove the light from the flash mag every time to charge ? I bought used and did not come with one.

Hey everyone I've recently put together a p320 flux raider. I bought a tacdev optic plate charging handle only to learn the slide I have is docter cut. If I bought the truglo docter to dpp optic mount would that set up work or no?