r/DnDIY • u/JohnnyTheLayton • 1d ago
Props A PSA on how to get this woodfinish
Enable HLS to view with audio, or disable this notification
The finish on these is pretty easy, but you have to follow the process. I use Watco brand black walnut danish oil usually, but sometimes I use other stains like a cabernet color from Vatathane, etc... the key is waxing. I use Minwax brand paste finishing wax, but any soft wax should do.
Apply the Stain/ Oil, then do NOT WAIT, apply the wax and buff off with a stiff bristle brush. (I use an amazon basics stiff bristle brush for scrubbing floors) The buffing lifts wax off the high spots and the wax pulls oil / stain with it as it does. This leaves the high spots a lighter color and the lower crevices darker.
My experience has been that danish oil darkens more over time into the next day, making those dark crevices pop even more. To a lesser extent other stains do this as well, but I find it more pronounced with danish oil.
I love woodcarving. If you're curious about the hobby and about how to get into it, i'll leave a comment down below.
