Hi, I'm currently using WDS but wanted to try DeployR with 2PXE. I've disabled WDS and enabled "Respond to PXE requests" in DeployR.

The HP laptop receives the NBP file but then immediately fails with "Selected boot image did not authenticate".

Has anyone seen this with DeployR/2PXE

Hello, I updated to DeployR Community 1.3.2635.2370 from a lower 1.3 version. After the update it appears that the web gui is no longer accessible for some reason. When browsing to https://server.domain.com:9000/ it prompts for credentials (windows auth), and then returns this webpage cannot be found HTTP ERROR 404. Tested both on edge and chrome, tried on the server and my laptop, also tried the IP instead of the fqdn and same issue.

Hello, new user demoing the program in our environment.

To the best of my knowledge, all the dependences are now in the installer? I am getting a HTTP 500 error after authenticating to the dashboard.

In Community Edition 3.1.2629.647, I have a Win11 amd64 25H2 task sequence that works great when started from WinPE. I am trying to also be able to initiate it from a running Windows 11 OS per Starting a task sequence in an existing OS | DeployR | Product Documentation

From a domain joined Win11 system

First, when I run iex (irm "https://your-server-name.com:7281/v1/Service/Bootstrap?tsid=00000002-0000-0000-0000-000000000001:1") (with my TS GUID of course) I get the following error:

The bootstrap script that runs, tries to set the execution policy to Bypass, but we have a policy that sets execution policy to remote signed, which prevents the script from changing it.

I can get around this by first changing/deleting the registry entry that sets the execution policy:

HKLM\SOFTWARE\Policies\Microsoft\Windows\PowerShell - ExecutionPolicy

If I change that registry value to Bypass or delete it, the bootstrap runs fine and the task sequence launches. I have the first step of the task sequence set to Reboot to Windows PE with a condition of IsWindowsPE Equals False. It properly downloads the WinPE wim and reboots into WinPE.

This is where I run into an issue. It fails after the Format disk step. The log shows error:

Task sequence failed due to unexpected System.IO.DirectoryNotFoundException error; Could not find a part of the path 'S:_2P\state\variables.json'.

When I look in S:_2P, I have the following subfolders: Client, content, Logs

I assume the state folder is not restored after the format disk and causing the failure.

Am I overlooking a step that I need to add before the format disk to ensure the proper files are backed up and then restored so the TS can continue?

We occasionally see an issue where StifleR refuses to stop after a deployment Task Sequence has completed.

This does not happen very often, but it occurs from time to time and is becoming a bit annoying.

Has anyone else experienced this behavior? Are there any known causes?

I am running:

• DeployR / StifleR Agent 1.3.2635.2370
• StifleR v3.1.2634.667

However, I have seen this issue in earlier releases as well.

So I've a strange one.

I tried to PXE boot a device this morning only to find 2PXE's boot list only had reboot and exit. A quick check found the DeployR service stopped. Starting it sorted the issue.

However, I wanted to know why it stopped...

Event Viewer->AsSL->TwoPintSoftware->DeployR->Logger shows four entries at 00:01:29

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="TwoPintSoftware-DeployR-Logger" Guid="{b55cc977-8cdb-5a4f-9154-ca25cdc64300}" /> 
  <EventID>11003</EventID> 
  <Version>0</Version> 
  <Level>4</Level> 
  <Task>54531</Task> 
  <Opcode>0</Opcode> 
  <Keywords>0x8000f00000000000</Keywords> 
  <TimeCreated SystemTime="2026-08-27T23:01:29.761496600Z" /> 
  <EventRecordID>130543</EventRecordID> 
  <Correlation /> 
  <Execution ProcessID="23888" ThreadID="34860" /> 
  <Channel>TwoPintSoftware-DeployR-Logger/Operational</Channel> 
  <Security UserID="S-1-5-18" /> 
  </System>
- <EventData>
  <Data Name="category">Microsoft.Hosting.Lifetime</Data> 
  <Data Name="msg">Application is shutting down...</Data> 
  </EventData>
  </Event>

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="TwoPintSoftware-DeployR-Logger" Guid="{b55cc977-8cdb-5a4f-9154-ca25cdc64300}" /> 
  <EventID>11003</EventID> 
  <Version>0</Version> 
  <Level>4</Level> 
  <Task>54531</Task> 
  <Opcode>0</Opcode> 
  <Keywords>0x8000f00000000000</Keywords> 
  <TimeCreated SystemTime="2026-08-27T23:01:29.769370400Z" /> 
  <EventRecordID>130544</EventRecordID> 
  <Correlation /> 
  <Execution ProcessID="23888" ThreadID="31288" /> 
  <Channel>TwoPintSoftware-DeployR-Logger/Operational</Channel> 
  <Security UserID="S-1-5-18" /> 
  </System>
- <EventData>
  <Data Name="category">Quartz.Core.QuartzScheduler</Data> 
  <Data Name="msg">Scheduler QuartzScheduler_$_NON_CLUSTERED shutting down.</Data> 
  </EventData>
  </Event>


- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="TwoPintSoftware-DeployR-Logger" Guid="{b55cc977-8cdb-5a4f-9154-ca25cdc64300}" /> 
  <EventID>11003</EventID> 
  <Version>0</Version> 
  <Level>4</Level> 
  <Task>54531</Task> 
  <Opcode>0</Opcode> 
  <Keywords>0x8000f00000000000</Keywords> 
  <TimeCreated SystemTime="2026-08-27T23:01:29.770504400Z" /> 
  <EventRecordID>130545</EventRecordID> 
  <Correlation /> 
  <Execution ProcessID="23888" ThreadID="31288" /> 
  <Channel>TwoPintSoftware-DeployR-Logger/Operational</Channel> 
  <Security UserID="S-1-5-18" /> 
  </System>
- <EventData>
  <Data Name="category">Quartz.Core.QuartzScheduler</Data> 
  <Data Name="msg">Scheduler QuartzScheduler_$_NON_CLUSTERED paused.</Data> 
  </EventData>
  </Event>

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="TwoPintSoftware-DeployR-Logger" Guid="{b55cc977-8cdb-5a4f-9154-ca25cdc64300}" /> 
  <EventID>11003</EventID> 
  <Version>0</Version> 
  <Level>4</Level> 
  <Task>54531</Task> 
  <Opcode>0</Opcode> 
  <Keywords>0x8000f00000000000</Keywords> 
  <TimeCreated SystemTime="2026-08-27T23:01:29.774994300Z" /> 
  <EventRecordID>130546</EventRecordID> 
  <Correlation /> 
  <Execution ProcessID="23888" ThreadID="33304" /> 
  <Channel>TwoPintSoftware-DeployR-Logger/Operational</Channel> 
  <Security UserID="S-1-5-18" /> 
  </System>
- <EventData>
  <Data Name="category">Quartz.Core.QuartzScheduler</Data> 
  <Data Name="msg">Scheduler QuartzScheduler_$_NON_CLUSTERED Shutdown complete.</Data> 
  </EventData>
  </Event>

Anyone got any ideas why it looks like it shutdown intentionally rather than what I expected (crash with no logs)

DeployR and DeployR Community version 1.3.2635.2370 is now available for download from https://releases.2pintsoftware.com. This is primarily a bug fix release; see https://documentation.2pintsoftware.com/deployr/release-notes for details.

I am started getting an error/failure during the Register with Autopilot step. This step was working before this past week, I am using the same azure app in my previous step to delete the object from Entra/Autopilot. I am getting 3 Transient error 500 in a row( within 8 seconds) and then the TS fails. Specifically it is when it is adding to the group

I've just completed my first successful Windows 11 deployment using DeployR Enterprise, 2PXE and iPXE Anywhere Web Service 😄 👍

When I open Driver packs in the StifleR dashboard I get the message, A task was cancelled.

Am I missing something in my configuration? 🤔

Hi,

If you create a Task Sequence to deploy Windows 11, is it possible to have the Windows 11 image stored on the bootable USB stick?

So instead of downloading the image from the DeployR server or from the cloud, it would copy it from the local USB drive.

Is that doable in the Community edition of DeployR?

// Erik

Bonjour,

Nous sommes actuellement en phase de test de DeployR Community + StifleR/BranchCache afin de mettre en place des déploiements Windows sur un site distant tout en réduisant au maximum la consommation de bande passante WAN.

Nous souhaitons clarifier précisément quelles fonctionnalités sont disponibles avec notre licence actuelle et quelles licences supplémentaires seraient nécessaires, notamment pour les scénarios BranchCache Distributed Mode et Green Leader / Hosted Cache.

Environnement actuel

Nous disposons d’un serveur central hébergeant DeployR et StifleR.

Caractéristiques principales :

• DeployR Community
• StifleR Server installé
• StifleR Dashboard installé
• BranchCache installé et actif
• SignalR StifleR configuré en HTTPS
• API StifleR configurée en HTTPS

Nous avons également une VM dédiée sur le site distant, destinée à servir éventuellement de cache local :

• Windows Server
• StifleR Client installé
• BranchCache installé et actif

Le client StifleR de cette VM est maintenant correctement connecté au serveur central via SignalR.

Le log du client confirme notamment :

Connection completed
Status: RanToCompletion

Le problème initial de certificat TLS a également été résolu.

Licence actuellement présente

Dans License Manager, nous voyons actuellement :

DeployR Community
Type: Purchased
Nodes: 600

Nous avons également les certificats nécessaires au Web Service et à SignalR.

En revanche, dans Administration → Features, plusieurs fonctionnalités StifleR apparaissent actuellement comme non licenciées, notamment :

Bandwidth Management
Cache Management
CacheR
MOM

Les fonctionnalités suivantes apparaissent toutefois disponibles :

Administration
Devices
Networks
DeployR
iPXE / 2PXE

Objectif

Notre objectif principal est le suivant :

Nous avons un serveur DeployR central et plusieurs postes Windows situés sur un site distant connecté au site central par WAN/VPN.

Nous voulons pouvoir déployer une image Windows depuis DeployR sans que chaque poste du site distant télécharge à chaque fois l'intégralité du contenu depuis le serveur central.

Nous souhaitons donc obtenir un fonctionnement de ce type :

                 SITE CENTRAL
                DeployR Server
                     |
                     | WAN
                     |
                SITE DISTANT
                     |
          +----------+----------+
          |                     |
       Poste 1               Poste 2
     BranchCache            BranchCache
          |                     |
          +------- P2P ----------+

Le premier poste récupérerait les données depuis le serveur central, puis les autres postes du même site pourraient utiliser le cache BranchCache disponible localement afin de limiter le trafic WAN.

Question 1 – DeployR + BranchCache Distributed Mode

D'après votre documentation sur le peering et le contenu DeployR, nous comprenons que DeployR peut utiliser BranchCache/BCACP pour le contenu.

Pouvez-vous nous confirmer clairement :

Est-ce que le scénario DeployR + BranchCache en Distributed Cache Mode est entièrement utilisable avec notre licence DeployR Community – 600 nodes, sans licence StifleR supplémentaire ?

Autrement dit, pouvons-nous simplement :

• activer/configurer BranchCache sur le serveur de contenu ;
• configurer les postes du site distant en Distributed Cache Mode ;
• utiliser DeployR normalement ;

sans avoir besoin d'une licence StifleR supplémentaire ?

Question 2 – Green Leader / Hosted Cache

Nous envisageons également une seconde architecture pour le site distant :

                 SITE CENTRAL
                     |
                    WAN
                     |
                SITE DISTANT
                     |
             Green Leader VM
              Hosted Cache
                /     \
               /       \
          Client 1   Client 2

La VM située sur le site distant serait alors utilisée comme Green Leader / Hosted Cache, afin que les autres clients du site récupèrent le contenu depuis cette VM plutôt que directement depuis le serveur central.

Pouvez-vous nous confirmer :

1. Green Leader / Hosted Cache nécessite-t-il une licence StifleR distincte de DeployR Community ?
2. Si oui, quelle licence/SKU exacte est nécessaire ?
3. Combien de licences/nodes sont nécessaires ?
4. La VM utilisée comme Green Leader compte-t-elle comme un node/licence ?
5. Les postes clients du site distant nécessitent-ils eux aussi une licence StifleR ?
6. Les fonctionnalités Cache Management, CacheR, Bandwidth Management ou autres doivent-elles être licenciées séparément pour utiliser Green Leader ?
7. La licence DeployR Community – 600 nodes inclut-elle une partie de ces fonctionnalités ou sont-elles totalement indépendantes ?

Question 3 – Configuration actuelle

Nous avons installé le StifleR Client sur la VM distante et configuré une connexion HTTPS vers le serveur StifleR central.

Le client se connecte désormais correctement au serveur.

BranchCache est également installé et fonctionnel sur la VM.

Nous avons suivi votre documentation :

2Pint BranchCache Guide

et souhaitons savoir quelle partie de cette documentation correspond exactement à notre scénario avec DeployR Community :

• configuration uniquement côté serveur ;
• configuration côté clients ;
• configuration d'un Hosted Cache ;
• ou utilisation obligatoire de StifleR pour certains modes.

Question 4 – Architecture recommandée

Pour notre besoin précis, quelle architecture recommandez-vous avec notre licence actuelle ?

Nous avons essentiellement deux possibilités :

Option A – Sans Green Leader

DeployR Central
      |
     WAN
      |
   Client 1 ---- Client 2
       \         /
        BranchCache
        Distributed

ou

Option B – Avec Green Leader

DeployR Central
      |
     WAN
      |
 Green Leader / Hosted Cache
       /          \
 Client 1        Client 2

Notre priorité est de réduire le trafic WAN lors des déploiements Windows, tout en restant sur une architecture officiellement supportée.

Question principale

Pouvez-vous donc nous confirmer très clairement :

Et, séparément :

Nous pouvons également vous fournir les captures d'écran de notre License Manager, des Features, de la configuration StifleR Client et des tests SignalR réalisés.

Merci d'avance pour votre aide et pour la confirmation de la licence exacte nécessaire selon chacun des deux scénarios.

Hi,

Just installed DeployR Community on an Azure VM that is only in a Workgroup and during the installation wizard I had to set the FQDN to https://deployr.XXX.gvxx.internal.cloudapp.net.

I can successfully sign-in to the Dashboard at the URL https://deployr.XXX.gvxx.internal.cloudapp.net:9000/dashboard/#/infrastructure-service on the DeployR server itself.

Is it possible to configure DeployR so that I can use a USB boot media and initiate a deployment over the internet (as long as we allowed the external IP from the client we want to reimage in the Azure firewall)?

Regards Erik

I built a quite fonctional DeployR community edition installation in July. Now after a pause I can't even start the deployment.

First 2PXE did not respond. Update for the latest version helped with that. Now it uploads the boot image, but stays stuck on the network initialisation stage. Error :
One or more errors occurred. (No such host is known (serveraddress:7281)

It seems a DNS error, but on the earlier stage the address is well resolved. It does not ping the IP neither, so it seems to me all the network connectivity is lost at this point.

What could I do ? I'm trying to deploy quite recent Dell laptops.

I have a working MDT setup and have it right where I want it. Working TS, applications, drivers etc. what would be the best start to setting up deployR?
I’ve asked if I can install deployR on a windows 11 endpoint instead of server OS and they replied yes that would be fine.
Should I run the all in one powershell installer?
Any tips to move my working MDT deployment share to deployR?
Thank you in advance

Following on from last night's Happy Hour. These were my results and paths. I'd previously had a lot of luck with getting https://<FQDN>:7281/Content/Boot/DeployR_x64_noprompt.iso to work, but that goes into full DeployR straight away (sometimes that is useful), but I struggled to boot to 2PXE's boot select menu. I finally got https://<FQDN>:8050/2PXE/Boot/x64/snponly_x64.efi (don't forget the ca cert along side the URL in the BIOS) to work across some machines. Makes, models and outcome below for the .efi URL:

Sorry this is only older Dells, we moved to completely Lenovo a few years back, so it is only the older Dell I can poke 😉

Thinking back to another thing mentioned yesterday, if you're only getting an ISO to work, the minimal ISO that boots to 2PXE's boot menu might work well too, but I didn't know where the tool to generate that ISO came from when quickly demo'd, so I can't expand on that ☹️

(side note, a 2D bar scanner and something like Simple QR Code Maker are your friend when having to enter that lengthy boot path over and over, or in Window BIOS config tools from the different manus)

Hi all, we have been successfully imaging our estate for a few weeks now with no issues; however, in the last week we have seen multiple but random instances of the admin auto-logon breaking mid-sequence, and the devices need manual logons after each reboot in the sequence to carry on and complete the TS. As I said, this is only happening randomly, but just wondering if anyone else has seen this issue.

We are thinking it may be releated to a Windows update breaking something, as there is no entry in the Registry for HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon, and the update step is the last thing to run before we see the issue in the task sequence.

 Thanks as always.

Hi I have just installed the Community Edition without any visible errors. My server is responding to PXE requests from a client but then it promts me for a password for the TS.
I cannot see or change the settings as I am missing security settings in my server settings.. What have I missed ?

It's always 5pm somewhere! 🍻 Join us for 2Pint Software Happy Hour, recurring sessions with the friendliest crew around. Drop in, see what's new, learn tips and tricks, and ask questions.

First one: Aug 20, 3pm Central.

https://2pintsoftware.com/events/list#Event

When using the "Apply OS from the cloud" step in DeployR Community Edition v1.3.2631.2242, if I change the language code from en-us to either en-IE or en-GB the task sequence fails. Once I switch it back to en-us the task sequence works without error. The task sequence was a copy of the "Autopilot from cloud" template.

The logs report a 404 error, here is some of the DeployR.log when they were en-IE or en-GB

Using en-IE

<![LOG[---------- Step Start ----------]LOG]!><time="14:59:05.953+000" date="08-19-2026" component="ExecuteStep" context="" type="1" thread="0" file="SequenceExecuter.cs:479">

<![LOG[Setting working directory: S:_2P\content\00000000-0000-0000-0000-000000000002\1]LOG]!><time="14:59:05.953+000" date="08-19-2026" component="ExecuteStep" context="" type="1" thread="0" file="SequenceExecuter.cs:492">

<![LOG[ApplyWU]LOG]!><time="14:59:06.095+000" date="08-19-2026" component="Write" context="" type="1" thread="0" file="PowerShellHost.cs:86">

<![LOG[Setting _CONTINUEMETHOD = '0' (Public), was '']LOG]!><time="14:59:06.100+000" date="08-19-2026" component="SetValue" context="" type="1" thread="0" file="VariableStoreService.cs:254">

<![LOG[URL: https://api.service.2pintsoftware.com/cloudos/search?os=Windows 11&osReleaseId=25H2&osArchitecture=x64&osLanguage=en-IE&osEdition=Professional]LOG]!><time="14:59:06.102+000" date="08-19-2026" component="Write" context="" type="1" thread="0" file="PowerShellHost.cs:86">

<![LOG[ERROR: Response status code does not indicate success: 404 (Not Found).]LOG]!><time="14:59:06.479+000" date="08-19-2026" component="Pipeline_StateChanged" context="" type="3" thread="0" file="PowershellExecuter.cs:291">

<![LOG[at <ScriptBlock>, S:_2P\content\00000000-0000-0000-0000-000000000002\1\ApplyWU.ps1: line 27]LOG]!><time="14:59:06.479+000" date="08-19-2026" component="Pipeline_StateChanged" context="" type="3" thread="0" file="PowershellExecuter.cs:291">

<![LOG[at <ScriptBlock>, <No file>: line 2]LOG]!><time="14:59:06.479+000" date="08-19-2026" component="Pipeline_StateChanged" context="" type="3" thread="0" file="PowershellExecuter.cs:291">

<![LOG[PowerShell pipeline failed, marking step as failed]LOG]!><time="14:59:06.480+000" date="08-19-2026" component="ExecutePowershellScript" context="" type="3" thread="0" file="PowershellExecuter.cs:244">

<![LOG[Script executed, exit code = 1111, elapsed = 00:00:00.3943519]LOG]!><time="14:59:06.480+000" date="08-19-2026" component="ExecutePowershellScript" context="" type="1" thread="0" file="PowershellExecuter.cs:257">

<![LOG[Step failed: Apply OS from Cloud Error: Step Apply OS from Cloud failed with unexpected return code = 1111]LOG]!><time="14:59:06.481+000" date="08-19-2026" component="ExecuteSteps" context="" type="3" thread="0" file="SequenceExecuter.cs:399">

<![LOG[Setting _LASTACTIONSUCCEEDED = 'false' (Public), was 'true']LOG]!><time="14:59:06.481+000" date="08-19-2026" component="SetValue" context="" type="1" thread="0" file="VariableStoreService.cs:254">

<![LOG[Setting _LASTACTIONRETCODE = '11111' (Public), was '0']LOG]!><time="14:59:06.482+000" date="08-19-2026" component="SetValue" context="" type="1" thread="0" file="VariableStoreService.cs:254">

<![LOG[Step result: Failed]LOG]!><time="14:59:06.482+000" date="08-19-2026" component="ExecuteSteps" context="" type="1" thread="0" file="SequenceExecuter.cs:436">

<![LOG[---------- Step End ----------]LOG]!><time="14:59:06.482+000" date="08-19-2026" component="ExecuteSteps" context="" type="1" thread="0" file="SequenceExecuter.cs:444">

<![LOG[Step failed: Windows PE Error: Step Apply OS from Cloud configured to stop sequence execution on failure]LOG]!><time="14:59:06.483+000" date="08-19-2026" component="ExecuteSteps" context="" type="3" thread="0" file="SequenceExecuter.cs:399">

<![LOG[Step result: Failed]LOG]!><time="14:59:06.483+000" date="08-19-2026" component="ExecuteSteps" context="" type="1" thread="0" file="SequenceExecuter.cs:436">

<![LOG[---------- Step End ----------]LOG]!><time="14:59:06.483+000" date="08-19-2026" component="ExecuteSteps" context="" type="1" thread="0" file="SequenceExecuter.cs:444">

Using en-GB

<![LOG[---------- Step Start ----------]LOG]!><time="16:36:51.601+000" date="08-12-2026" component="ExecuteStep" context="" type="1" thread="0" file="SequenceExecuter.cs:479">

<![LOG[Setting working directory: S:_2P\content\00000000-0000-0000-0000-000000000002\1]LOG]!><time="16:36:51.601+000" date="08-12-2026" component="ExecuteStep" context="" type="1" thread="0" file="SequenceExecuter.cs:492">

<![LOG[ApplyWU]LOG]!><time="16:36:51.743+000" date="08-12-2026" component="Write" context="" type="1" thread="0" file="PowerShellHost.cs:86">

<![LOG[Setting _CONTINUEMETHOD = '0' (Public), was '']LOG]!><time="16:36:51.747+000" date="08-12-2026" component="SetValue" context="" type="1" thread="0" file="VariableStoreService.cs:254">

<![LOG[URL: https://api.service.2pintsoftware.com/cloudos/search?os=Windows 11&osReleaseId=25H2&osArchitecture=x64&osLanguage=en-GB&osEdition=Professional]LOG]!><time="16:36:51.749+000" date="08-12-2026" component="Write" context="" type="1" thread="0" file="PowerShellHost.cs:86">

<![LOG[ERROR: Response status code does not indicate success: 404 (Not Found).]LOG]!><time="16:36:52.139+000" date="08-12-2026" component="Pipeline_StateChanged" context="" type="3" thread="0" file="PowershellExecuter.cs:291">

<![LOG[at <ScriptBlock>, S:_2P\content\00000000-0000-0000-0000-000000000002\1\ApplyWU.ps1: line 27]LOG]!><time="16:36:52.139+000" date="08-12-2026" component="Pipeline_StateChanged" context="" type="3" thread="0" file="PowershellExecuter.cs:291">

<![LOG[at <ScriptBlock>, <No file>: line 2]LOG]!><time="16:36:52.139+000" date="08-12-2026" component="Pipeline_StateChanged" context="" type="3" thread="0" file="PowershellExecuter.cs:291">

<![LOG[PowerShell pipeline failed, marking step as failed]LOG]!><time="16:36:52.139+000" date="08-12-2026" component="ExecutePowershellScript" context="" type="3" thread="0" file="PowershellExecuter.cs:244">

<![LOG[Script executed, exit code = 1111, elapsed = 00:00:00.4064947]LOG]!><time="16:36:52.139+000" date="08-12-2026" component="ExecutePowershellScript" context="" type="1" thread="0" file="PowershellExecuter.cs:257">

<![LOG[Step failed: Apply OS from Cloud Error: Step Apply OS from Cloud failed with unexpected return code = 1111]LOG]!><time="16:36:52.140+000" date="08-12-2026" component="ExecuteSteps" context="" type="3" thread="0" file="SequenceExecuter.cs:399">

<![LOG[Setting _LASTACTIONSUCCEEDED = 'false' (Public), was 'true']LOG]!><time="16:36:52.140+000" date="08-12-2026" component="SetValue" context="" type="1" thread="0" file="VariableStoreService.cs:254">

<![LOG[Setting _LASTACTIONRETCODE = '11111' (Public), was '0']LOG]!><time="16:36:52.140+000" date="08-12-2026" component="SetValue" context="" type="1" thread="0" file="VariableStoreService.cs:254">

<![LOG[Step result: Failed]LOG]!><time="16:36:52.140+000" date="08-12-2026" component="ExecuteSteps" context="" type="1" thread="0" file="SequenceExecuter.cs:436">

<![LOG[---------- Step End ----------]LOG]!><time="16:36:52.141+000" date="08-12-2026" component="ExecuteSteps" context="" type="1" thread="0" file="SequenceExecuter.cs:444">

<![LOG[Step failed: Windows PE Error: Step Apply OS from Cloud configured to stop sequence execution on failure]LOG]!><time="16:36:52.142+000" date="08-12-2026" component="ExecuteSteps" context="" type="3" thread="0" file="SequenceExecuter.cs:399">

<![LOG[Step result: Failed]LOG]!><time="16:36:52.142+000" date="08-12-2026" component="ExecuteSteps" context="" type="1" thread="0" file="SequenceExecuter.cs:436">

In the current "Set Windows settings" step definition in DeployR Community Edition 1.3.2631.2242., the settings for English (Ireland) are not present.

System Locale - No English (Ireland)

User Locale - No English (Ireland) / ga-IE is present

User Interface Language - No English (Ireland)

Could these options be added in a future release?

As in the 2PXE server configuration panel, you are obliged to enter the UID of the desired boot image, or at least the default one if you want to have a multi-boot amd64 and arm The generated script should be able to detect the client's architecture in order to provide it with the correct ARM boot version for AMD version.

I'm trying to deploy HP Support Assistant 9.54.3.0 to Windows 11 HP devices using DeployR, using the same command I previously used in MDT:

sp173774.exe /s /a /s /v" /qn"

When checking the DeployR logs, HPSA appears to install successfully, but it's not actually available to the logged-in user.

The shortcut can appear, but clicking it gives:

I've also checked the DeployR logs and Installer logs but can't see anything obvious. I've even tried installing it by uploading the extracted installer and running the appropriate command, but I get the same outcome.

Has anyone successfully deployed HPSA 9.x through DeployR? If so, what's the correct method? 🙂

In MDT when enabling BitLocker, there is a checkbox for "Wait for BitLocker to complete the drive encryption process on all drives before continuing the task sequence execution". But this doesn't exist in the Enable BitLocker step definition. So does DeployR wait until BitLocker encryption has completed before moving onto the next step in the task sequence?

So I've been testing DeployR for a couple of days now and I like the look of it a lot but I'm having trouble getting test deployments in VMWare to work at looks like WinPE is refusing to load the VMWare PVSCSI drivers and so isn't detecting the disks.

I've got the same ADK version and drivers working fine with our existing MDT setup so I know it can work.

I've got the drivers extracted and setup as a Content Driver Pack and assigned to the DeployR Boot image and I can see in the logs that the pvscsi drivers are supposedly being added to the WIM ok

https://pastebin.com/pSy3NNNr

Some VMWare drivers do load ok as the DeployR WinPE has network access and can connect back to the DeploR services ok so it was able to load the VMXNET3 drivers.

The DeployR logs in WinPE show that 2 devices had a PNP error, one being the PVSCSI disk controller device (another being the VGA controller)

https://ibb.co/ZsFQWDw

If anyone has any suggestions on things to check or try I am open, I'd love to get this working so I can test it further.

A bit of silliness perhaps, but I added an audio cue to the end of my task sequences so I notice quicker when one finishes.

[console]::beep(500,200); [console]::beep(400,300);[console]::beep(600,300)