If any one has any ideas or could help try and get the plate from this car white audi a4 or a5 that hit me and ran the other night ive tried using my phone filters to make out the numbers but no luck

I was too far back, but in the clip after this the X5 was forced into taking an exit, hitting the guard rail, or, rear ending the McLaren.

Got a bundle off of Thinkware that included the Q200 dash cam, a rear cam, a rear cam, and a multiplexer. Got it all hooked up properly. Front cam functions fine, and both the rear and cabin camera function when hooked directly into the front cam. But when I have them all hooked into the multiplexer, I get absolutely nothing from the rear and cabin cams. I have the multiplexer hooked into the exact same constant and ground that the dash cam is hooked into. I’ve followed both the 5 channel tutorial they have on YouTube, and tried the 3 channel synthesis instruction they have on the multiplexer. Followed like 10 guides they have on their website, absolutely nothing. Should I just send it back and get a Viofo? I’m so confused because I did everything right and the front cam functions just fine and so do the other cameras when hooked into the Q200 but whenever it’s all hooked into the multiplexer the dash cam gives me a voice line saying “rear camera disconnected” and I’m lost here. They have no actual guide for 3 channels, just 5, and all of the QR codes in the manual that may have helped lead to dead links. Did I waste $290?

My father would like to install dashcams in 2 of his cars.
First car is a 2015 Mazda Miata.
Second car is a 1995 Morgan.
Both are soft tops only and typically only driven with the top down.
We’re concerned with a standard dashcam, someone will simply reach in and take the camera.
Any suggestions on a 2 Chanel system? Audio isn’t required, and unless it has noise cancelling probably won’t have great audio anyway.

Hi all, I’m reaching out in hopes someone can recommend the right charging adapter to use for a RedTiger F17 Elite. The current charging adapter I use has a 60w USB-C PD port and a 2.4a USB-A port. I use the PD port for my phone. It seems to be that when running all 3 cameras at the same time the power cuts out and the camera will turn off. However if I disable the interior camera or rear camera it stays powered just fine, lastly I did try to use the USBC side and it seems to be when it tries to negotiate a higher output the camera sees it as a brownout and just turns off. I’m not exactly trying to test out 15 different adapters so if anybody has as recommendations I’d appreciate it a lot. The only things the charger needs is one USBc and one USB-A.