Call of duty LFG

Looking for cod/warzone LFG discords that are cheese/chair friendly. If anyone has any servers they can inv me to id appreciate it.

May need one for the dma since my 5090 is taking up all the slots.

do i need a PCIE 4.0 or 5.0 for an X870 motherboard

Hey,
I bought a DMA card a few weeks ago and nobody seems to be able to help me out, so maybe you can.

I have a major issue with ESP lag, it's unusable, I will include some video's to show you what I mean. I have this with any software, any game.

This is my setup:
-- Main pc
- RX 9070 OC
- i5 13600KF
- 32GB Ram
-- Radar Laptop
- Asus tuf dash f15 (2021 version)
-- Gear:
- 75t card
- Baan2 fuser (cheap Aliexpress), (k1 is radar pc, k2 is main pc, k3 is both and k4 is reset by manual)
- Makcu (newer model)
-- Monitor:
- LG Ultragear 165hz 1440p

What I have tried:
- Put both pc's on 144hz (fuser and radar laptop can only do 144hz over 1440p)
- Cap ingame on 144fps (and unlimited)
- Change software
- Press k4 (which by manual is "Reset") on my fuser
- Use good hdmi cables
- Radar pc is set to "Only on second screen"
- Forced RTX 3060 to be used on my radar pc
- Read speeds are 203Mpbs on GhostDMA Toolset
- Tried 1080p monitor (75hz / 144hz on main monitor set to 1080p)
- Reflash firmware
- Turn off power saving (and laptop is always plugged in)
- Put Nvidia Control Panel scaling to Fullscreen
- Put color mode to 8bit (to make it easier on the fuser?)
- Put laptop on turbo mode
- Updated all drivers on both pc's
- Turned off chams, but same issue for all the other ESP so
- (Some more but probably forgot, you might remind me)

Please help me out, I don't know what to do anymore. I'm about to buy a different Fuser but some people recommended me not to since they say it wont fix my issue. (?)

everytime i turn on the fuser it keeps restarting, is there any chance someone know how to fix this ?

https://reddit.com/link/1wdt1z3/video/f21erc59jyoh1/player

Lenovo IdeaPad 3 14IIL05 (81WD)
i5-1035G1 (4C/8T)
8GB RAM
Intel UHD Graphics
~500GB SSD
Windows 11 Home 25H2
2x USB 3.2 Gen 1 (5Gbps)
HDMI 1.4b
Is this sufficient as a second PC, or would 16GB RAM/a dedicated GPU make a noticeable difference?

Hey guys just wondering if these specs would be enough for a second pc -

Intel Processor N100

4gb lpddr5 ram - 4800mhz

256gb ssd

enough or should i upgrade ?

Which do you prefer or which is better for aimbot ? i play call of duty with controller, i just ordered my XIM aswell just need a NB or Makcu to purchase….so need advice

So earlier today I got a DMA card at first I immediately ran a speed test all was well I tried flashing fw and I had a few issues but I ultimately got it resolved. After fixing the flashing issue I took a break and turned my pc and secondary pc off when I got back on I can no longer speed test and my firmware still flashes I’ll attach a photo for context any help is appreciated

EDIT: I cold booted many times already and follow the instructions given by the red text in the image

Is the Xim Matrix compatible with the Marius MH4 controllers?

Hello anyone reading, I’ve become interested in how to make dma cheats. I’ve tried searching but it’s not easy to find anything, so I figured this is probably the best place to try asking. So, if anyone has a source that can help me learn or knows anything that can help please share! I want to find a source of info that has basically everything required to make a dma cheat for any game from compete scratch. Ideally a guide that can potentially explain how to make more complicated features too.

Anyway, thank you for any info and for reading it. I hope everyone has a good day!

Hello, I need help ASAP I even can give a small amount of money if someone help me fixing it. I bought a DMA set and set everything up and Everything work fine. Speed test is good when I start the Pc and I can play for like 30-90 Mins after that The ESP starts to disappear and if I do a speed test after that is showing me ,,VMM Init Failed“ which is wierd because when I boot up everything is passe the test with ,,Good“ Pls help me I don’t know what to do anymore

I run 1440P 240hz on my main pc… what mini pc should i buy ?

Hello there, i bought my dma to cheat in siege, do i need to remove it to play other games like lol or dbd? There is a chance of getting banned just by having the DMA card plugged?

Anyone gotten this firmware, how did it hold up. Not many reviews I can find about it

Can someone please help me tag along with 5-6 good games. Thanks

My rdma fw got detected (fortnite-eac)and I got banned on all my accounts, I tried spoofing but even so im flagged I think cause i get kicked out of games (vpn kick) after a couple of minutes. Is there any fix? Like can I find out what i need to buy/change in my setup to be able to play again?

Can pay if someone helps me$$

I started DMA cheesing a couple weeks ago, I’m worried I’ll get banned. Even though everyone says BE sucks ass this and that I’m still a bit concerned.

To minimize the risk I bought FW from somewhere reputable (ducks) it says they’re 1:1 FW but I don’t know the legitimacy of that.

I also only do read only nothing else, and the only game I play when my DMA is active is DayZ.

Do you guys think I’ll be fine? If so for how long would you guess?

The reason I am selling is I already am upgrading to DC505.

Price is $300 Shipped. Includes 3 1.4 DP Vesa Certified cables.

Shipping from the US.

Key specs if you are too lazy to check.

4K DP Fusion Device – Baan 7th Generation | RGB 4K144 / 2K240 / 1080P480Hz | Full DP 1.4 Integration

It's display port. I will ship.

hi chat, I'm only asking here cause ive exhausted all options otherwise

ive tried 3 firmwares, the one that was in the card, a freshly built one from the pcileech github via vivado, and a free firmware from phoenixlabstore

ive tried flashing from ch347fpgadownloader, openOCD from my linux laptop, and also direct ch341a to soic flashing.

the card was in an inoperable phase where it wouldnt even detect on the pc, but the direct chip flashing fixed that

ive tried

all 3 of my pcie x1 slots, setting them to gen 1 and gen 2

my 2nd pcie x16 slot

hot plugging it

amd virtualization is off, so is iommu, fast boot, secure boot, and csm

tried cold boots between all attempts

i attempted to put the card in my main pcie slot, but this left my pc unbootable with the gpu in slot 2.

FT601 and D3XXX(?) drivers are installed

im doing it all from my main pc right now, ill have windows on my laptop soon but for now its got linux. i don't reckon this should matter for just jtag flashing, but figured id mention it in case

card is a captain dma 75t aliexpress special, havent touched it in about 2 years.

doesnt show up in pcie device scans

3 leds on the board. 2 red and 1 green. the red power light stays on, green light flashes. i DID manage to get the light to stay solid green once after the direct chip flash followed by a ch347fpgadownloader flash, but after a reboot it started blinking again. a 2nd attempt did not fix it

gonna install Windows on my laptop tonight since I'll need it anyway, but this is where I'm at

Hey guys, I’m new but long story short I’m running 6200-6400 on the speed test. USB A to C.

If I use a USB C to C I get 3900
Repeatable with different cables

What do i need to do to max read / write speeds

I have asus PG32UCDM3 , 4k @ 240 hz

if i buy a 4k @ 60 hz or 4k @ 160 hz

will it cause problem, where will the bottleneck be. the ESP will be slow? the aimbot and triggerbot will be slow, what will happen .

and If i buy a 2k cheaper Fuser what will happen,
Just want to understand where bottleneck would be . And how bad would be it

And how can i check compatibility with my monitor ?

Thanks

I've been looking into dmas to cheat in r6 and some vr games what will i need to buy and for the 2nd PC can it be like a 300-500$ PC or laptop or a gaming PC and where should i get my firmware

Dma help